Chucks and Collets

Vertical Chucks range from 300-800 mm.

Vertical Chucks range from 300-800 mm.

Quad Vertical Combination Chucks allow simultaneous holding of up to 8 parts, plus complete machining of part in single operation. Visually continuous spindle use is possible because chucks allows access to 3 sides of work piece, eliminating need for multiple set-ups. Master jaws can be set in either self-centering or compensating mode with use of center bracket for multiple loading of parts.

Read More »
Machinable Collet turns delicate parts.

Machinable Collet turns delicate parts.

Usable with or without lathe collet closing system, machinable collets are suited for turning delicate parts. Knurled nut closes collet via internal taper, which engages matched taper on body of tool. Collet stem has .625 in. dia with machined Â-½ in. hex on end of stem to allow for work set-up off machine in production situations. Products are available in steel or aluminum and have...

Read More »
Collet Chucks have Dead Length design.

Collet Chucks have Dead Length design.

NDR pull-to-close collet chucks are actuated as draw tube moves toward machine spindle and slides bar against pusher, resulting in consistent Z axis positioning of bar. All components are hardened and precision ground. With lubricated-for-life design, products feature parallel clamping and radial adjusting screws and internal face seal. Chucks are available for MicroCentric Quick Change Collets...

Read More »
Chuck Exchange System provides fast changeovers.

Chuck Exchange System provides fast changeovers.

With AJC Chucking System, face of chuck comes off as single unit so all 3 jaws can be removed and replaced simultaneously. Separate plate containing top jaws for each part can be stored on rack next to turning center. Auto-clamping feature allows complete changeovers in less than 30 sec. When integrated with robot loader and vision part-identification system, it provides 100% unattended operation.

Read More »

Milling Chucks offer high accuracy and gripping force.

U-Series Milling Chucks provide strong grip and rigidity through chucking mechanism that clamps cutting tool evenly up to 3 mm from chuck's nose. Thick wall and internal slots also create additional torque and rigidity. Chucks provide high accuracy with run-out of less than 5 Â-µm at 100 mm from nose. Four sizes range from 0.750-2.000 in., however chucks can be converted for use with metric...

Read More »
Pin Arbor Chucks machine flat, round parts.

Pin Arbor Chucks machine flat, round parts.

Series LMC Models PB and PBH Pin Arbor Chucks eliminate distortion when holding round parts with flat surfaces. Both are offered with air, coolant, or both air and coolant supplied through chuck. They include pull-down and radial-clamping features and come in 5, 6, 8, and 10 in. sizes. Model PBH features standoff behind chuck to support back side of jaws. Chucks are typically used for machining...

Read More »

Step Chucks run two core diameters at once.

Pneumatic Step Chucks can run 2 different core diameters without any adapters or changing of chucks. They include all benefits of torque-activated mechanical chucks and range in size from 70 mm to 12 in. Units are suitable for converting and packaging industries.

Read More »
Hydraulic Power Chuck suits hard turning applications.

Hydraulic Power Chuck suits hard turning applications.

Operating at speeds to 7,000 rpm, GHA6-8-66 consists of one 8 in., 3-jaw chuck with 66 mm through hole. Clamping repeatability is less than 10 microns. Additional offerings include proprietary and Matsumoto hydraulic power chucks, cylinders, and wheel chucks; rotary tables for single- and multiple-axis CNC machinery; Atling steady rests; and Neidlein face drivers. Unit permits machining at feed...

Read More »
Collets come in sets with wooden trays.

Collets come in sets with wooden trays.

Collet sets include single angle, double angle, and TG style with options that include rubber sealed, steel sealed, and coolant disk nut system collets. ER single angle collet sets come in 8 metric sets with 9 to 23 collets per set, and 6 different inch sets with 7 to 23 collets per set. DA double angle sets come in 15 different inch size sets with 9 to 41 collets per set. TG collet sets come in...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics