Richardson Introduces ADI-DPD-DEVKIT SDR Kit with Scalable RF Front End Board

Richardson Introduces ADI-DPD-DEVKIT SDR Kit with Scalable RF Front End Board

The ADI-DPD-DEVKIT Software-Defined Radio Kit is optimized for FDD-LTE Bands 14 and 28 bands. The kit consists of DE705, ADRV9375-W/PCBZ and EVAL-TPG-ZYNQ3 boards. The DE705 board comes with single-channel transmitter and receiver with swappable ceramic duplexer. The kit offers +37 dBm (average Pout) and 55 dB linear gain. The EVAL-TPG-ZYNQ3 board provides a data capture platform for...

Read More »
Latest IOSC Evaluation Board Features an Enable/Disable Function

Latest IOSC Evaluation Board Features an Enable/Disable Function

The IOSC Evaluation Board is available as unassembled version or as an assembled circuit board. The board consists of regulated and attenuated supply voltage (1.8 and 5.0 V) and a potentiometer. This product is designed for testing surface-mountable standard oscillators, VCXOs and TCXO/VCTCXOs. The potentiometer mounted on the board reduces the frequency tolerance and the effect of soldering. It...

Read More »
Richardson Offers New Power Amplifier Evaluation Boards with Up to 6.78 MHz Operating Frequency

Richardson Offers New Power Amplifier Evaluation Boards with Up to 6.78 MHz Operating Frequency

The 100 W and 300 W Power Amplifier Evaluation Boards are offered with current or voltage control, built-in protection circuitry, EMI filtering and configurable output power. The 100 W (GSWP100W-EVBPA) units are suitable for markets such as laptop computers, domestic assistant robots and power tools whereas the 300 W (GSWP300W-EVBPA) are used in warehouse robots, medical units and factory...

Read More »
Future Electronics Introduces STMicroelectronics' Evaluation Board Features NFC Harvesting

Future Electronics Introduces STMicroelectronics' Evaluation Board Features NFC Harvesting

New NFC tracker evaluation board offers a comprehensive software library as well as an application to monitor and log sensor data over NFC from an Android or iOS device. The board mounts an ST25DV NFC Tag, an STM32L0 ARM Cortex M0+, environment sensors and motion sensor. The ultra-low power sensor node evaluation board offers NFC harvesting to supply power and battery cradle for a CR2032 battery.

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
Future Electronics Presents Nebula IoT Development Board with Cloud Connectivity

Future Electronics Presents Nebula IoT Development Board with Cloud Connectivity

The Nebula IoT Development Board comes with Cypress CYW4343W Wi-Fi (802.11 a/b/g/n) and Bluetooth 4.1 chipset radio. The unit is embedded with Arm® Cortex®-M4 STM32 MCU that features 32 bit RISC Core, 180 MHz frequency, 2MB Flash, up to 256 kB SRAM. The board provides cloud connectivity to Amazon Web Services, IBM Bluemix, Alibaba Cloud and Microsoft Azure. It’s hardware can be expanded...

Read More »
New Model 6001 QuartzXM System-on-Module Features Up to 18 GBytes of DDR4 SDRAM

New Model 6001 QuartzXM System-on-Module Features Up to 18 GBytes of DDR4 SDRAM

Pentek’s Model 6001 QuartzXM™ System-on-Module creates a multichannel data conversion and processing solution on single chip with eight integrated RF-class A/D and D/A converters. The unit provides LVDS connections to Zynq UltraScale+ FPGA and GTY communications for gigabit serial communication. It accepts analog IF or RF inputs and delivers the inputs as differential pairs into the RF-signal...

Read More »
New MitySOM-A10S-DSC Processor Board Comes with Dual-Side Connectors

New MitySOM-A10S-DSC Processor Board Comes with Dual-Side Connectors

MitySOM-A10S-DSC Processor Board is designed for machine vision, test and measurement, embedded instrumentation, industrial automation and control applications. Unit comes with Intel®/Altera Arria® 10 SoC with dual core ARM and up to 480KLE FPGA fabric and two DDR4 RAM memory subsystems. Supporting OpenCL™ and high-level synthesis (HLS) tools, the processor accelerates design cycles.

Read More »
New HDClear 3-Mic Development Kit Features Programmable Dual-Core DSP

New HDClear 3-Mic Development Kit Features Programmable Dual-Core DSP

HDClear™ 3-Mic Development Kit enables developers to build Alexa-enabled devices such as smart speakers, wearable computing device, smart home devices and remote controls. Kit comes with improved voice algorithms such as echo cancellation, noise reduction, beamforming and far-field enhancement. Unit’s DSP features SPI, I2C, UART and SLIMbus application processor interfaces. HDClear™ kit...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics