New Analyzers Products

Power Analyzer measures energy variables.

Model 1010 measures harmonics, voltage, frequency, crest factor, and performs power analyses. It checks energy consumption of electrical appliances, measures maximum and minimum energy demand, and makes harmonic analysis of power factor correction capacitors. It also analyzes variable-speed motor drives and solid-state lighting ballasts, makes efficiency measurements, measures inrush current when...

Partical Sizer measures at concentrations to 20 vol%.

HPPS (High Performance Particle Sizer) incorporates back scatter optics to measure concentration samples without need for dilution. Non-invasive back scatter technology detects scattered light while maintaining signal quality. HPPS uses 1 disposable cell, and does not require cleaning. It is capable of moving sample cell and automatically locating optimum measurement position. Measurement...

Spectrum Analyzer monitors environments for RF signals.

Compact SA3000 PC-based instrument covers entire 2.4 GHz ISM band, identifies optimal locations for wireless equipment, and alerts installers to potential interference. When combined with laptop computer, it provides remote site surveillance at any location. Receiver hardware interfaces to desktop or laptop PC via RS232 serial port. Software includes tools for gathering and evaluating data....

Moisture Balance tests snack food products.

Digital Moisture Balance provides quality control moisture or solids tests. Operation is simple: operators loads sample up to 100 g, and presses 2 buttons. When test is finished, bell rings, and the results are in digital display. It has RS232 port for communicating with computer or printer. Rugged system can be placed in plant near production line.

Key Considerations for Medical PCB Assembly

This white paper provides an overview of key considerations for medical PCB assembly.

Infrared Analyzers are filter based.

Infracal Filtometers are portable instruments that supplement FT-IR spectrometers for dedicated quantitative mid-infrared (MIR) analysis applications. They have no moving parts or optics to require alignment. Analyzers can be used to measure total oil and grease and total petroleum hydrocarbons in water and soil. They can also check cleaning efficiencies on metal parts and determine soot...

Hydrogen Analyzer monitors power equipment.

Portable Model 380WP Tri Gas Analyzer monitors hydrogen purity in power generators and synchronous converters which use hydrogen gas for cooling. It also monitors CO2 in hydrogen and CO2 in air during shutdown and startup purge procedure. All gases are detected on single temperature compensated thermal conductivity cell. Front panel switch selects desired range. It has digital readout and...

Flue Gas Analyzer monitors combustion processes.

Portable Model 362WP continuously measures O2, CO, and NOx in flue gases from most combustion processes. Separate digital readouts are provided for each gas. It has built-in sample pump, flowmeter, filter/condensate trap and rechargeable gel cell battery. Measurement ranges are 0-25.0% 02, 0-2000 ppm NOx, and dual ranges of 0-2000 ppm and 0-4.00% CO. Recorder outputs, weatherproof case, and...

Process Analyzer measures reactive liquids.

NIR Chemical Process Analyzer System uses only TeflonÃ-® and other non-reactive materials for components that are in contact with samples. Configurations are available for fiber optic based NIR and UV/Vis for analysis applications of aqueous acid and caustic, as well as hydrocarbons, chemicals, and pharmaceuticals.

Elemental Analyzer operates under Windows(R) NT or XP.

Eagle III micro-Probe(TM) consists of table-top, micro-XRF elemental analyzer that uses capillary optics to concentrate X-ray beam size down to 100 micrometer diameter on sample. High-intensity X-ray optics, CCD video imaging cameras, and motorized XYZ stage allow non-desructive, simultaneous Na through U analysis of solid objects, liquids, and powders. Eagle III software displays all information...

Material Analyzer measures heat flow.

SDT 0600 materials characterization analyzer simultaneously provides heat flow measurement from ambient temperature to 1,500 deg C and weight change. It has dual balance mechanism, bifiliar found furnace, and horizontal purge gas system with mass flow control and gas switching capability. Platinum/platinum-rhodium thermocouple embedded in each beam ensures accurate and precise transition and...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.