Adhesives

Adhesives

Industrial Spray Adhesive bonds variety of materials.

Available in both multi-purpose and heavy duty formulas, White Lightning® industrial spray adhesives can bond paper, metal, plastic, wood, and cardboard. Providing low soak-in factor, multi-purpose formula dries quickly and has controlled mist spray pattern. With ability to resist heat up to 170°F, heavy duty version has variable volume controlled, lace spray pattern.

Read More »
Clear Epoxy is for bonding and potting optical devices.
Epoxies

Clear Epoxy is for bonding and potting optical devices.

Featuring viscosity of 700-800 cps, Master Bond EP29LP multi-purpose 2-part optical epoxy has low exotherm to peak of 120°F . It adheres to optical fibers, connectors, lenses, and glass and forms high strength bonds of more than 3,500 psi in shear. With temperature range of 60-250°F, epoxy has chemical resistance to water, fuels, acids, bases, and salts.

Read More »
One Part Epoxy Adhesive works in -60 to +450°F temperatures.
Epoxies

One Part Epoxy Adhesive works in -60 to +450°F temperatures.

Bonding to similar and dissimilar substrates, EP13 single-component epoxy adhesive requires no mixing and has unlimited working life at room temperature. It exhibits dimensional stability, is 100% reactive, and does not contain any solvents or diluents. Able to be applied to vertical surfaces without sagging or dripping, adhesive cures within 60-90 minutes at temperatures of 300 to 350°F....

Read More »
Applicators

Hand-held Applicator Dispenses Electrically Conductive 400ºF Flexible Epoxy with Pinpoint Accuracy

Duralco 125 Stress Free" epoxy forms a flexible, electrically conductive bond for continuous use to 400Â-ºF. Ideal for manufacturing and repairing of flexible circuits, solder replacement, bonding semi-conductors, EMI shielding, thermistors, wire tacking, heating elements, assembling, electronics, etc. Duralco 125 offers 400ºF service and provides outstanding electrical conductivity,...

Read More »
DYMAX Plastic-Bonding Adhesives Pair Well with New BlueWave® LED Spot Curing System
Bonds

DYMAX Plastic-Bonding Adhesives Pair Well with New BlueWave® LED Spot Curing System

October 22, 2008 The DYMAX "3000" series plastic-bonding adhesives make high-speed, high-volume bonding of plastic appliances, subcomponents, housings, and enclosures possible. These adhesives cure in seconds upon exposure to ultraviolet light and/or visible light, even through UV-blocked plastics. These no-VOC, worker-friendly adhesives from DYMAX form high-strength, environmentally-resistant...

Read More »
Epoxies

Epoxy Adhesive suits specialized electronics applications.

Silver-filled, 2-part EP-600 attaches components, such as resistors, LEDs, and grounding wires to metal and plastic substrates where high temperature curing cannot be used. Electrically conductive product cures at temperatures from 20-140°C with cure times from 48 hr to 2-6 min, depending on temperature. Available in pre-weighed pouches, EP-600 works in high-speed automated dot dispense and...

Read More »
Adhesives

Low Viscosity (15 to 20 cps) UV Curing Optical Adhesive and Coating

Norland Optical Adhesive NOA 89 is a clear, colorless, liquid photopolymer with a viscosity of 15 to 20 cps that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding where the adhesive can be exposed to UV light. The use of NOA 89 eliminates premixing, drying or heat curing operations common to other adhesive systems....

Read More »
Transfer Adhesives bond to automotive grade plastic surfaces.
Adhesives

Transfer Adhesives bond to automotive grade plastic surfaces.

Based on high performance acrylic technology, models 7772 and 7775 transfer adhesives are available in 2 and 5 mL thickness, respectively, and offer shear resistance at both room and elevated temperatures. Properties include good peel adhesion to materials with high surface energy and balanced peel adhesion to surfaces with low energy. Products are suited to bonding with plastic surfaces such as...

Read More »
Adhesive produces bonds in zirconia components to 3200°F.
Adhesives

Adhesive produces bonds in zirconia components to 3200°F.

Ceramabond(TM) 885 high temperature, phosphate-bonded, zirconia-filled, water-based formulation bonds to zirconium oxide along with variety of other ceramic and glass products. It offers dielectric strength of 250 V/mil, tensile-shear strength of 500-600 psi after exposure to 1,000°F, less than 1% of shrinkage upon curing, and exhibits no outgassing. Supplied as single part dispensable...

Read More »
Adhesives

Silicone Adhesive offers controlled volatility.

Suited for use in close proximity to sensitive electronic and electrical devices, type SE 1720 CV silicone adhesive starts adhesion to polybuthylene terephthalate (PBT) substrates in 5 min with full adhesion in 30 min at 80°C. Adhesive also suits automotive applications such as case sealing and attaching electronic components for underhood controllers; chassis and brake applications such as...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics