Adhesives

Inks

Henkel Corporation, Curtis Packaging and Flint Group to Present Ink and Coating Options at Sustainable Packaging Coalition Spring Meeting

FEBRUARY 25, 2009 Bridgewater, NJ - Experts from Henkel Corporation, Curtis Packaging and Flint Group will present more sustainable ink and coating options at the Sustainable Packaging Coalition spring meeting in Chicago on March 24. "Adhesives, inks and coatings are less understood packaging materials than primary substrates, such as aluminum, fiber, glass and plastics," said Isabelle Valois,...

Read More »
Adhesive targets in-vitro diagnostic devices.
Adhesives

Adhesive targets in-vitro diagnostic devices.

ARcare® 92205 hydrophilic porous pressure-sensitive adhesive transmits fluids or gases while bonding filters and membranes within devices. Pores range from 200-500 microns in diameter and present 30%-50% porosity with finished film thickness of 2-8 mil. Offering stable pore structure of isolated channels in Z-axis direction, adhesive transfer film helps guide aqueous fluids evenly from...

Read More »
Nylok PRECOTE 85(TM) Meets GM Specs GM-6175M and GM-6194M
Adhesives

Nylok PRECOTE 85(TM) Meets GM Specs GM-6175M and GM-6194M

Macomb, Mich., January 5, 2009 - Nylok, the world leader in value-added fastener parts, announced that PRECOTE 85 has been approved at GM to meet GM-6175M and GM-6194M test specifications. With this approval we can now be specified for GM projects requiring more rigorous performance requirements in North America and around the world with GM specification GMW14657," said Nilo Urbani, General...

Read More »
Resins

Huntsman to Feature High-Performance Materials at Composites & Polycon 2009

Huntsman Advanced Materials will highlight its full range of resins, hardeners and formulated systems for fabricating composite parts used in aerospace, transportation, recreation and wind power applications at Composites & Polycon 2009, Booth #1721, Tampa, Florida, January 15 - 17, 2009. Among the primary product lines on display will be patented new nano-toughened epoxy systems for infusion...

Read More »
Infrared Heaters

Activating Adhesives on Decorative Trims - Using Infrared Heating in Car Manufacture

An infrared system from Heraeus Noblelight is helping R-Tek Ltd to achieve perfect adhesion of decorative trims on the inside of motor vehicle door panels. The plastic decorative trims are normally fixed to the panels on a production line by spraying the inside of the panel with an adhesive and then applying the trim. However, when R-Tek started to experience problems with the adhesion, it was...

Read More »
A Versatile Aerospace Epoxy Conquers Cryogenic Wind Tunnel
Epoxies

A Versatile Aerospace Epoxy Conquers Cryogenic Wind Tunnel

2/26/2009 A uniquely formulated epoxy adhesive has come to the rescue in an extraordinarily difficult cryogenic wind tunnel model bonding application. The state of the art wind tunnel poses a difficult challenge to engineering thermoplastics, not only in terms of the low temperatures and vacuum conditions, but in terms of thermal, thermal cycling and mechanical shear stresses. Cooled to...

Read More »
Potting Compound withstands temperature extremes.
Encapsulants

Potting Compound withstands temperature extremes.

With thermal conductivity of 25 BTU-in./hr-ft2-°F and volume resistivity of 1 x 1014 W cm, Type EP37-3FLFAN dielectric heat transfer adhesive works in temperature extremes, up to 250°F and down to 4K in cryogenic environments. Two-part thermal potting compound is formulated to cure at room temperatures and forms bonds that are resistant to shock, impact, thermal cycling, and chemicals.

Read More »
Ceramic Adhesive suits high temperature potting applications.
Repair Compounds

Ceramic Adhesive suits high temperature potting applications.

Magnesium oxide filled, water based, 2-part ceramic adhesive and coating system Ceramabond(TM) 672 can be used in assembly of high temperature catalytic converters for applications to 2,800°F. It exhibits volume resistivity of 109 W-cm, dielectric strength of 255 V/mil, tensile shear strength of 500 psi, and torque strength of 21.6 ft-lb. Adhesive contains no VOCs, does not outgas in ultra...

Read More »
Canisters

Henkel Industrial Adhesives Achieve GreenGuard® Certifications

January 27, 2009 Bridgewater, NJ - In a move to further support its customers in the construction and woodworking markets, Henkel Corporation has obtained GreenGuard® certifications for selected products within each of its woodworking product brands. The certified products include a selection of wood glues and contact cements, as well as low VOC and green diamond canister products. "Air...

Read More »
Adhesives

Silicone Adhesives are designed for use on medical devices.

With ability to cure within 30 sec on exposure to suitable UV/visible light source, Loctite® 5055(TM), 5056(TM), and 5240(TM) eliminate part racking and allow immediate quality control testing. Silicones demonstrate tear strengths in excess of 50 lb/in. Loctite® 5055(TM) offers adhesion to polycarbonate and tensile strengths of nearly 1,500 psi, while Loctite® 5056(TM) offers...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics