Adhesives

Polyurethane Adhesive contains flourescent trace.
Adhesives

Polyurethane Adhesive contains flourescent trace.

Improved TRA-BOND 724-20 provides bond-line control for critical alignment applications. Pre-mixed and frozen polyurethane adhesive provides strong, resilient bonds to various substrates including aluminum, solder, nylon, mylar and steel. Adhesive strength is maintained even in cryogenic conditions. Polyurethane exhibits good dielectric properties, and offers multiple curing options, including...

Read More »
Adhesives

Water-Based Adhesives suit automotive assembly applications.

Environmentally friendly water-based adhesives work on porous substrates such as foams, cloth, felt, and insulation, and non-porous materials such as wood, plastic and metals. Products are available with fast-tack and foam tearing strength comparable to solvent based adhesives. Adhesives are fast setting for use in general upholstery, foam-to-foam, foam-to-fabric, or foam-to-wood bonding, and may...

Read More »
Epoxies

Adhesive Epoxies come in pre-formulated cartridges.

Epox-Eez(TM) twin pack cartridges are pre-filled, measured and mixed. Adhesive will cure at room temperature, provide 500°F service, and have chemical, electrical and moisture resistance. Epox-Eez cartridges are available for company's General Purpose 4525N, Low Viscosity 4461N, Vibration Resistant 4535N, Fast Set 4537N, Ultra Flexible 4538N, and Machinable Epoxy 4540N high-temperature...

Read More »
Lamination Adhesives improve holdout when aerated.
Adhesives

Lamination Adhesives improve holdout when aerated.

Aerobond 32-192A and 12-200A adhesives are able to contact substrate surface without flowing down and away from where bonding should occur. Type 32-192A is for Automatan and similar laminating equipment; 12-200A formulated dextrin adhesive is for general purpose laminating. Both should be applied with nip rollers.

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Ceramic Adhesive is formulated with phosphate binder.
Adhesives

Ceramic Adhesive is formulated with phosphate binder.

Ceramabond(TM) 690 single part, boron nitride filled ceramic adhesive bonds and coats in temperatures to 2700°F, and can be used in oxidizing atmospheres to 1560°F and reducing and vacuum environments to 2700°F. Thermal conductivity is 55 W/m-°K, and dielectric strength is rated at 500 volts/mil. Exceptional resistance is shown to molten glasses and metals. Curing time is...

Read More »
Adhesives

Graphite Adhesive works at temperatures to 5400° F.

Resbond 931 cures at 250°F to form 99% pure graphite bonds that have bond strengths in excess of 2500 psi. Bonds are electrically conductive and resist reducing atmospheres, most chemicals, and solvents. Applications include repairing cracked or broken graphite trays, fixtures, and dies; filling and rebuilding crevices, cracks, and worn areas; and bonding graphite cloths, felts, and boards....

Read More »
Machinery Adhesives lock and seal nuts and bolts.
Adhesives

Machinery Adhesives lock and seal nuts and bolts.

Superlock adhesives provide positive locking and sealing on both active and inactive surfaces. Screw Lock Grade 2222 low-strength threadlocker is for spiral screws less than 1/4 in. diameter. Medium-strength Grade 2242 works on nuts, bolts, and screws with diameters up to 3/4 in. Grade 2262 high-strength formula controls torque/tension and clamp load on larger bolts and nuts in applications...

Read More »
Lens Bonding Adhesives are optically clear.
Adhesives

Lens Bonding Adhesives are optically clear.

Lens assembly adhesives for precision bonding, mounting, laminating, and fixturing applications have good adhesion to lens construction materials and to most metal, coated or painted frames and holders. Applications include cameras, microscopes, as well as eyeglass and sunglass lenses. Special UV blocking grades are available that adhere to PVA, CR-39, and CAP. These flexible lens bonders provide...

Read More »
UV Adhesive bonds fiber optics.
Adhesives

UV Adhesive bonds fiber optics.

TRA-BOND F 175 clear, low viscosity adhesive bonds metals, ceramics, and most rigid polymers. Cure time of a few seconds upon exposure to ultraviolet light makes it suitable for fiber optic terminations where fast cure is required. It produces very little shrinkage upon cure, so stress is minimal. Adhesive also works well in high humidity environments or in applications that require thermal...

Read More »
Conductive Adhesive is silver-filled.
Adhesives

Conductive Adhesive is silver-filled.

QMI 526 silver-filled, thermally conductive adhesive can be cured inline using Skip-Cure(TM) processing in 8 sec at 150°C. This product can perform in lead-free, 260°C reflow applications. Hydrophobic, and stable at high temperatures, QMI 526 delivers void-free bond lines with excellent adhesive strength on organic and metal surfaces. Its adhesion mechanism compensates for fluorine...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics