IOtech, Inc.
Bedford Heights, OH 44146-1833
Share:
Ethernet-Based Instruments offer continuous data acquisition.
DaqBook/2020/2001/2005Ã-® feature built-in 10/100BaseT Ethernet interface capable of transferring acquired data back to PC at 200 Kreading/s. Units provides 16-bit, 200 kHz A/D, which can be expanded to over 1,000 I/O channels. Four 10 MHz counters synchronously measure frequency and count pulses concurrent with analog measurements. Packaging includes integrated carrying handle and expansion...
Read More »
PCI-Based DAQ Boards feature plug-and-play operation.
DaqBoard/1000(TM) series provides 16-bit, 200-kHz A/D converter and 16 single-ended or 8 differential analog inputs. Boards feature synchronous analog, digital, and frequency I/O as well as DMA bus mastering. On-board scan sequencer permits user to select up to 512 channel/range combinations and scans all channels contained in sequence at rates to 5 Ã-µs/channel. Up to 4 DaqBoards can be used...
Read More »
Ethernet Based Vibration Analyzer handles 8-56 channels.
Portable ZonicBook/618E(TM) vibration analysis and monitoring system is available with 5 eZ-Series(TM) software packages to define specific analysis and monitoring features. Hardware includes Ethernet engine powered by PowerPC processor, which enables all acquired data to be transferred to PC in real-time at 2+ Mb/sec. Unit has 8 software-programmable dynamic inputs, front-panel indicators for...
Read More »
Software offers support for DaqBoard / 2000(TM) series.
MATLABÃ-® technical computing environment supports data acquisition and analysis processes. It interfaces with data acquisition devices and instruments to analyze/visualize data. When finished with analysis, it allows user to produce presentation-quality materials. System tools can be used to communicate with data acquisition boards and also allow measured data to be streamed live. Software...
Read More »
Thermocouple Input Module has 56 channels.
DBK90(TM) high-density thermocouple (TC) input module, suited for use with DaqBook/2000Ã-® and WaveBook/516E(TM) series Ethernet-based data acquisition products, enables up to 896 thermocouples to be attached to one A/D mainframe. Any combination of TC types can be attached to any channel via mini-TC input connectors. Each bank of 14 TC inputs has separate cold-junction sensors, and time...
Read More »
Digital I/O Board provides up to 32 isolated I/O channels.
Rack-mountable Model DBK210(TM) can be configured with up to 32 Grayhill 70M series compatible isolated solid-state digital I/O modules, but occupies same space as 16-channel boards. Modules can sense AC and DC signals and switch AC and DC loads. Four 8-channel banks can be selected as inputs or outputs via switch. LEDs for every channel indicate status. Each channel includes power-up setting...
Read More »
I/O Modules do not degrade Wavebook measurement bandwidth.
Models WBK40(TM) and WBK41(TM) provide measurement capabilities for Ethernet-based 1 MHz WaveBook/516E(TM) by adding up to 224 thermocouple inputs. WBK40, 14-channel thermocouple modules have on-board, 16-bit, 200 kHz A/D converters that measure TC inputs synchronously with WaveBook's 1 MHz measurements. Multifunction WBK41 modules, similar to WBK40 modules, include 14 thermocouple inputs, but...
Read More »
Signal Conditioning Module adds TEDS support.
Model WBK18(TM) offers 8 channels of dynamic signal input for WaveBook(TM) systems. It provides all signal conditioning and biasing required to accept accelerometers, sensors, microphones, or other dynamic input source. All channels are sampled simultaneously to insure phase matching between channels. Up to 8 units can be attached to one WaveBook for total ICPÃ-® sensor capacity of 64...
Read More »Data Acquisition Systems are Ethernet-based.
DaqBook/2000E and WaveBook/516E allow user to continuously acquire data to PC at rates up to 1 M readings/sec. Ethernet allows instrumentation to be located up to 300 ft from PC. With over 40 different signal conditioning and expansion options, units are suited for in-vehicle, laboratory, and factory floor applications. Software support includes LabVIEWÃ-® drivers, Visual Basic, C++, DASYLab,...
Read More »
Data Acquisition System performs multiple functions.
Available with 7 or 14 thermocouple input channels, DaqTemp(TM) Series measures temperature, voltage, frequency, and pulse count. With digital I/O and analog output, series consists of plug-and-play PCI board, cable, and screw-terminal signal conditioning pod. Channel-to-channel variation and noise less is than 0.2Ã-
Read More »