Miller Electric Manufacturing, an ITW company
Appleton, WI 54912
Share:
Portable Plasma Cutter weighs only 57 lb.
SpectrumÃ-® 625 can sever steel up to 7/8-in. thick, cut through 5/8 in. steel at 10 ipm, cut 1/4 in. steel at more than 60 ipm, and 1/8 in. steel at 200 ipm. It has output of 40 A/140 Vdc at 50 percent duty cycle. Even under variable voltage conditions, unit can maintain steady arc without losing cutting capacity. Pilot arc controller automatically reignites arc while cutting grates, chain...
Read More »
Wire Feeders come in single and dual benchtop models.
70 Series provides reliable arc control in heavy and high-volume manufacturing, metal fabrication, and construction applications. Units are compatible with any CV welding power source with 14-pin receptacle and 24 Vac supply. Models 74S (standard), 74D (digital meters), and 74DX (deluxe, full-featured) include automatic run-in and trigger hold. All models include tool-less rotatable drive...
Read More »
Welding Helmets have eye-catching graphics.
Auto-darkening welding helmets have variable welding shade control, lens sensitivity and delay control, auto-on/auto-off circuitry with reset function, self-recharging Solarcell(TM) lithium battery, and 3.85 x 1.85 in. viewing field. They provide continuous eye protection against UV and IR radiation, even when lens is in #3 ultra-clear light state mode. Made of polyamide nylon materials, helmets...
Read More »Welding Inverter communicates internally via DeviceNET(TM).
PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...
Read More »
Stick/TIG Inverter provides simple operation.
CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...
Read More »
Welding Generator is driven by diesel engine.
Trailblazer(R) 301 D boasts 300 A output and 10,000 W peak auxiliary power rating at 104 deg F. Multi-process, CC/CV machine provides 20 to 300 A dc output for Stick, TIG, MIG and Flux Cored welding. It also provides 35 to 225 A of ac current at 60% duty cycle for TIG welding. Generator is powered by 18.8 hp Kubota diesel engine that idles immediately when started. Welding arc is not affected...
Read More »
Weld Control connects to submerged-arc power sources.
HDC(High Deposition Controller) 1500 automatic weld control interfaces with AC or DC constant currents or constant-voltage power sources having remote contactor and output control. Unit offers true crater condition, burnback, and independent run-in and jog speed control. Five HDC 1500 packages include choice of power source, shunt control, cable kit, RAD wire drive assembly, wire straightener,...
Read More »
Wire Feeders run hard/cored wires at speeds of 50-780 ipm.
70 Series semi-automatic, constant-speed welding wire feeders are offered in bench top dual wire and Swingarc(TM) boom-mounted versions. Bench dual wire models feature spool capacity of 60 lbs (per side), independent controls, and separate meters. Swingarc boom-mounted 70 Series feeders' controls are placed at 12 or 16 ft boom's base, and drive assembly is at end of 360 deg rotating boom. Boom...
Read More »
Welding Products include power sources, drives, and feeders.
CST(TM) 250 Stick/TIG power source provides 250 A for stick and TIG welding. CST Rack for multiple operators can hold up to 4 welding units. Bobcat(TM) 250 NT engine driven welding generator's rated output in CC/DC/AC mode is 250 A at 25 V, 100% duty cycle. 70 Series constant-speed wire feeders are available in bench-top, boom-mounted, and single- and dual-wire configurations.
Read More »
Maxstar 200 LX DC-TIG/Stick Inverter-Based Power Supply
The MaxstarÃ-® 200 LX accepts input power ranging from 115 to 460V, single- or three-phase, and 50 or 60 Hz without any manual relinking. It comes with Auto-LineÃÆ'ââ¬- primary power management technology and has a 1 to 200 amp output. This power supply has controls for true pulsing, sequence controls, and trigger functions. Other features include a high-frequency Lift-Arc™ TIG...
Read More »