Miller Electric Manufacturing, an ITW company
Appleton, WI 54912
Share:
Power Sources provide pulsed MIG welding.
MillermaticÃ-® 350 and 350P offer 208/230 or 460/575 V single- and 3-phase input power, duty-cycle rating of 60% at 300 A/32 V, 25-400 A output, and line voltage compensation. Operators can disconnect MIG gun and replace it with optional push-pull wire feed gun. Model 350P has 4-roll wire drive system with 2 scaled tension adjustments and reversible drive rolls for .035 and .045 wire. Units...
Read More »
Multi-MIG Welding Inverters monitor arc conditions.
Software-driven, Axcess(TM) 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10-44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190-630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through...
Read More »
Multiprocess Inverter utilizes Auto-Line(TM) technology.
Weighing 80 lb, XMTÃ-® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Line(TM) primary power management technology, 5-425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance...
Read More »
Welding Generator offers multiprocess welding ouput.
Mid-frame, diesel engine-driven PRO 300 CC/CV provides Lift-Arc(TM) TIG arc starts suitable for code-quality welds on process pipe and true CV output for flux cored wires used for structural steel. Measuring 32 x 26 x 56 in., unit weighs 1,100 lb and utilizes 1,800 rpm CAT diesel engine. It produces 20-410 A multiprocess welding output (Stick, TIG, MIG, Flux Cored) and 12 kW of generator power.
Read More »
Welding Software overcomes short circuit MIG limitations.
RMD(TM) (Regulated Metal Deposition) software application, designed for modified short circuit transfer MIG welding, precisely monitors and controls electrode current during all phases of short. It lowers heat input by 5-20% compared to standard short circuit transfer, automatically maintains optimum arc characteristics, and minimizes spatter. Software operates with flexible primary power...
Read More »
Welding Helmet satisfies demanding industrial requirements.
Big Window Elite(TM) Series of auto-darkening helmets feature 4 independent arc sensors for out-of-position welding, and large window for maximum viewing capability. Replaceable, battery/solar assist, Performance Series(TM) lens technology permits 3,000 hours of operating time before batteries need replacing. Form-fitting, foam rubber cushion attaches to back of head gear for comfort. Helmet...
Read More »
Stick/TIG Inverter offers 5-150 A welding range.
MaxstarÃ-® 150 Series includes Stick only, Stick/TIG Lift-Arc start, and Stick/TIG high frequency or Lift-Arc start models. All have Stick output of 150 A at 30% duty cycle, enabling nearly unlimited welding with 1/8 in. diameter Stick electrode. Auto-Line feature allows units to connect to 115-230 Vac single-phase power, Ã-
Read More »
AC/DC TIG Inverter weighs 47 lb for field portability.
DynastyÃ-® 200 offers welding range of 5-200 A ac and 1-200 A dc. Auto-Line(TM) technology enables unit to plug into any primary power, from 120-460 V, single or 3-phase, 50 or 60 Hz. It maintains steady welding output even if primary power varies widely. Wind Tunnel Technology(TM) protects electrical components and PC boards from contaminants such as dirt and metal dust created by grinding....
Read More »
Welding Helmets honor Jeff Gordon and Dale Earnhardt Sr.
With self-recharging Solarcell(TM) lithium battery, auto-darkening welding helmets have variable welding shade control (No. 9-13), lens sensitivity and delay control, and auto-on/auto-off circuitry with reset function. Viewing field of 3.85 x 1.85 in. provides continuous eye protection against UV and IR radiation, even when lens is in No. 3 ultra-clear mode. Made of polyamide nylon materials,...
Read More »
Welding System offers push-pull wire welding module.
Millermatic-® 251 welding system is offered with wire welding module that mounts directly to side of unit, enabling 12 in. spools of aluminum wire with .035 or .047 in. dia to be run on internal wire system. System permits unit to connect directly to XR-Edge and XR-A pistol guns with 15 or 30 ft cables. Push-pull design allows for consistent feeding of aluminum wire by providing constant torque...
Read More »