SCHUNK
Morrisville, NC 27560
Toolholders feature small clamping diameters.
TRIBOS Mini toolholders and SVL extensions have clamping diameters as small as 0.012 in., allowing circuit board tools with straight shanks to be held directly in holder. Utilizing elastic forces of material to clamp tool shank, clamping process can be accomplished within 30 sec via clamping device - manual SVP-2 or automatic SVP-3 - together with corresponding reduction inserts. Run-out accuracy...
Read More »
Toolholders feature small clamping diameters.
TRIBOS Mini toolholders and SVL extensions have clamping diameters as small as 0.012 in., allowing circuit board tools with straight shanks to be held directly in holder. Utilizing elastic forces of material to clamp tool shank, clamping process can be accomplished within 30 sec via clamping device - manual SVP-2 or automatic SVP-3 - together with corresponding reduction inserts. Run-out accuracy...
Read More »
Wedge Clamping Element offers secure hold in minimal space.
The KSE 50 wedge clamping element from SCHUNK ensures an absolutely secure hold with high gripping forces. Workpieces with angled clamping faces can be securely held due to oscillating design of the chuck jaws. The active pull-down effect ensures that the workpiece is also pulled against the support. The KSE 50-PDB dramatically reduces vibration during the machining process. The wedge clamping...
Read More »
Magnetic Sensor Switch detects open/closed states.
Featuring 2 programmable switching points, MMS-P mounts to piston, which is moved to desired switching position. It is programmed via push of button to switch-on point. Fitting into 4-C groove, teachable slotted switch is available in connector version with 4-pin M8 connector and cable version with open wires.
Read More »
Wedge Clamping Element offers secure hold in minimal space.
The KSE 50 wedge clamping element from SCHUNK ensures an absolutely secure hold with high gripping forces. Workpieces with angled clamping faces can be securely held due to oscillating design of the chuck jaws. The active pull-down effect ensures that the workpiece is also pulled against the support. The KSE 50-PDB dramatically reduces vibration during the machining process. The wedge clamping...
Read More »
Magnetic Sensor Switch detects open/closed states.
Featuring 2 programmable switching points, MMS-P mounts to piston, which is moved to desired switching position. It is programmed via push of button to switch-on point. Fitting into 4-C groove, teachable slotted switch is available in connector version with 4-pin M8 connector and cable version with open wires.
Read More »
Two-Finger Long Stroke Gripper comes in sizes 30 and 50.
Able to handle small components or large workpieces, PEH 50 servo-electric gripper features maximum stroke of 100 mm per finger and gripping force that can be adapted to applications up to 315 lbf with maximum finger length of up to 250 mm. Gripper has brushless servo-motor, which is used as drive, and guides that are designed for precise handling at high loads. Integrated controller enables...
Read More »
Two-Finger Long Stroke Gripper comes in sizes 30 and 50.
Able to handle small components or large workpieces, PEH 50 servo-electric gripper features maximum stroke of 100 mm per finger and gripping force that can be adapted to applications up to 315 lbf with maximum finger length of up to 250 mm. Gripper has brushless servo-motor, which is used as drive, and guides that are designed for precise handling at high loads. Integrated controller enables...
Read More »
Clamping Force Block combines rigidity and precision.
Available in 100, 160, and 250 mm sizes, TANDEM KSP plus is built with one-piece, rigid base body that has compact, chip-deflecting shape and wear-resistant parts to promote sturdiness and minimize maintenance. Multi-tooth guidance of base jaws, length of jaw guidance, and exact centering via clamping sleeves help reduce jaw lifting to achieve repeat accuracy up to 0.01 mm. Other features include...
Read More »
Clamping Force Block combines rigidity and precision.
Available in 100, 160, and 250 mm sizes, TANDEM KSP plus is built with one-piece, rigid base body that has compact, chip-deflecting shape and wear-resistant parts to promote sturdiness and minimize maintenance. Multi-tooth guidance of base jaws, length of jaw guidance, and exact centering via clamping sleeves help reduce jaw lifting to achieve repeat accuracy up to 0.01 mm. Other features include...
Read More »