Haas Automation, Inc.

Big-Bore Turning Centers are designed for accuracy and stability.
Machinery & Machining Tools

Big-Bore Turning Centers are designed for accuracy and stability.

Models ST-25, ST-25Y (with Y-axis), ST-35, ST-35Y (with Y-axis), ST-45, and ST-45L (long-bed) offer max capacities from 12 x 21 in.Â- to 25.5 x 80 in. Standard features include rigid tapping, 15 in. color LCD monitor, and USB connectivity. Each spindle head has symmetrical design for thermal stability and rigidity, and 45° wedge design increases...

Read More »
Drill and Tap Machine incorporates milling capability.
Laboratory and Research Supplies and Equipment

Drill and Tap Machine incorporates milling capability.

Along with 508 x 406 x 394 mm work cube and 660 x 381 mm T-slot table, DT-1 features BT-30 taper spindle that spins to 15,000 rpm and allows tapping at speeds to 5,000 rpm. Standard 11.2 kW vector drive system provides 62 Nm peak torque for milling and boring, while 20-pocket, servo-driven tool changer swaps tools in 0.8 sec. Max cutting feedrate of 30.5 m/min, 61 m/min rapids, and 1 G...

Read More »
Extended-Travel HMC features 6,000 rpm, geared-head spindle.
Communication Systems & Equipment

Extended-Travel HMC features 6,000 rpm, geared-head spindle.

Equipped with 1,626 x 914 mm T-slot table, EC-1600YZT Horizontal Machining Center provides travels of 1,626 x 1,270 x 1,016 mm. System features cast-iron construction and 5-taper geared-head spindle powered by 22.4 kW vector drive system, providing 610 Nm of torque for heavy cutting. Machine comes standard with 360 L coolant system and 30+1 tool side-mount tool changer, as well as 15 in. color...

Read More »
Turning Center features max cutting capacity of 533 x 660 mm.
Communication Systems & Equipment

Turning Center features max cutting capacity of 533 x 660 mm.

Featuring rigid, thermally stable design, Model ST-30 provides max swings of 806 mm over front apron and 527 mm over cross slide. Spindle bore is 89 mm, with bar capacity of 76 mm. Operating at speeds to 3,400 rpm, 22.4 kW dual-drive spindle provides 373 Nm torque. For heavy-duty cutting, optional 2-speed gearbox is available that boosts torque to 1,139 Nm. Additional features include 254 mm...

Read More »
Horizontal Machining Center meets large-travel demands.
Communication Systems & Equipment

Horizontal Machining Center meets large-travel demands.

To accommodate large-volume machining, EC-1600 features 64 x 50 x 32 in. work cube; 64 x 32 in. T-slot table that supports up to 10,000 lb parts; and 6,000 rpm, geared-head, 50-taper spindle. Fully enclosed machine also includes multiple chip augers to evacuate chips and 95 gal flood coolant system. Cast-iron construction provides rigidity and dampens vibration, and 30 hp vector drive system...

Read More »
Communication Systems & Equipment

Haas Introduces Limited-Edition Tony Stewart Machine!

Oxnard, CA - To commemorate the historic partnership between celebrated NASCAR driver Tony Stewart and Haas Automation founder Gene Haas - co-owners of Stewart-Haas Racing - Haas Automation is building a Limited-Edition Tony Stewart VF-2SS VMC. This is the first time in the company's history that Haas Automation has designed and built a special-edition machine tool. The Limited-Edition Tony...

Read More »
Rotary Table offers 5-axis machining capabilities.
Communication Systems & Equipment

Rotary Table offers 5-axis machining capabilities.

Designed to mount in Y direction of mid-size VMC, TR160Y dual-axis trunnion rotary table measures less than 25 in. wide and 20 in. deep, and fits on one end of machine's table. It has 160 mm T-slot platter, and will swing parts up to 7.5 in. dia. Trunnion provides ±120° of tilt and 360° of rotation for full simultaneous 5-axis motion, or to position parts to any angle. Powerful...

Read More »
Extra-Large VMC is designed to handle monolithic parts.
Communication Systems & Equipment

Extra-Large VMC is designed to handle monolithic parts.

With travels of 150 x 32 x 30 in. (XYZ) and 150 x 28 in. T-slot table, VF-12 accommodates large-volume machining requirements of aerospace, automotive, and mold/die industries. VMC comes in 40- and 50-taper configurations, with spindle speeds to 10,000 rpm, and is constructed to provide consistent repeatability. Standard equipment includes side-mount tool changer, chip auger system, programmable...

Read More »
HMC offers 40 x 33 x 35 in. work envelope.
Communication Systems & Equipment

HMC offers 40 x 33 x 35 in. work envelope.

Accommodating parts up to 39.4 in. in both diameter and height, Model EC-630 features dual pallet changer with 630 pallets, each of which handles 2,645 lb load. Geared head couples motor directly to spindle through 2-speed gearbox, which provides 450 lb-ft of torque for heavy material removal and speeds to 6,000 rpm for finish cuts. With separate, protected load station, operator can safely load...

Read More »
Communication Systems & Equipment

Horizontal Machining Center has integrated pallet pool.

Designed for high-volume production and unattended operation, EC-630PP HMC offers 40 x 33 x 35 in. work envelope and is equipped with 50-taper, geared-head spindle; 6-station pallet pool with 630 mm pallets; and high-precision, 1° pallet indexer. Each pallet in pool has 2,640 lb load capacity and can be scheduled according to priority and sequencing requirements. Other features include 710...

Read More »
Company News

Haas Launches Online Parts and Customer Resource Websites

Haas Automation is known worldwide for providing the best service and support in the machine tool industry. Haas owners are covered by 170 Haas Factory Outlets in more than 60 countries, with 1000 fully stocked service vans, extensive on-site consigned parts inventories, and factory-trained service technicians. Now, Haas owners can also shop online for genuine OEM Haas parts at HaasParts.com, and...

Read More »
Big-Bore Turning Centers are designed for accuracy and stability.
Machinery & Machining Tools

Big-Bore Turning Centers are designed for accuracy and stability.

Models ST-25, ST-25Y (with Y-axis), ST-35, ST-35Y (with Y-axis), ST-45, and ST-45L (long-bed) offer max capacities from 12 x 21 in.Â- to 25.5 x 80 in. Standard features include rigid tapping, 15 in. color LCD monitor, and USB connectivity. Each spindle head has symmetrical design for thermal stability and rigidity, and 45° wedge design increases...

Read More »
Drill and Tap Machine incorporates milling capability.
Laboratory and Research Supplies and Equipment

Drill and Tap Machine incorporates milling capability.

Along with 508 x 406 x 394 mm work cube and 660 x 381 mm T-slot table, DT-1 features BT-30 taper spindle that spins to 15,000 rpm and allows tapping at speeds to 5,000 rpm. Standard 11.2 kW vector drive system provides 62 Nm peak torque for milling and boring, while 20-pocket, servo-driven tool changer swaps tools in 0.8 sec. Max cutting feedrate of 30.5 m/min, 61 m/min rapids, and 1 G...

Read More »
Extended-Travel HMC features 6,000 rpm, geared-head spindle.
Communication Systems & Equipment

Extended-Travel HMC features 6,000 rpm, geared-head spindle.

Equipped with 1,626 x 914 mm T-slot table, EC-1600YZT Horizontal Machining Center provides travels of 1,626 x 1,270 x 1,016 mm. System features cast-iron construction and 5-taper geared-head spindle powered by 22.4 kW vector drive system, providing 610 Nm of torque for heavy cutting. Machine comes standard with 360 L coolant system and 30+1 tool side-mount tool changer, as well as 15 in. color...

Read More »
Turning Center features max cutting capacity of 533 x 660 mm.
Communication Systems & Equipment

Turning Center features max cutting capacity of 533 x 660 mm.

Featuring rigid, thermally stable design, Model ST-30 provides max swings of 806 mm over front apron and 527 mm over cross slide. Spindle bore is 89 mm, with bar capacity of 76 mm. Operating at speeds to 3,400 rpm, 22.4 kW dual-drive spindle provides 373 Nm torque. For heavy-duty cutting, optional 2-speed gearbox is available that boosts torque to 1,139 Nm. Additional features include 254 mm...

Read More »
Horizontal Machining Center meets large-travel demands.
Communication Systems & Equipment

Horizontal Machining Center meets large-travel demands.

To accommodate large-volume machining, EC-1600 features 64 x 50 x 32 in. work cube; 64 x 32 in. T-slot table that supports up to 10,000 lb parts; and 6,000 rpm, geared-head, 50-taper spindle. Fully enclosed machine also includes multiple chip augers to evacuate chips and 95 gal flood coolant system. Cast-iron construction provides rigidity and dampens vibration, and 30 hp vector drive system...

Read More »
Company News

HTECs Generate Winners at 2009 SkillsUSA Championships

Oxnard, CA -In June, more than 5000 outstanding students from around the country competed in the 2009 SkillsUSA Championships in Kansas City, Missouri. For the fourth year, Haas Automation, Inc., sponsored the Precision Machining Technology (PMT) Competition at the event, and once again, the majority of winners in the PMT category received their training at Haas Technical Education Centers...

Read More »
Communication Systems & Equipment

Haas Introduces Limited-Edition Tony Stewart Machine!

Oxnard, CA - To commemorate the historic partnership between celebrated NASCAR driver Tony Stewart and Haas Automation founder Gene Haas - co-owners of Stewart-Haas Racing - Haas Automation is building a Limited-Edition Tony Stewart VF-2SS VMC. This is the first time in the company's history that Haas Automation has designed and built a special-edition machine tool. The Limited-Edition Tony...

Read More »
Rotary Table offers 5-axis machining capabilities.
Communication Systems & Equipment

Rotary Table offers 5-axis machining capabilities.

Designed to mount in Y direction of mid-size VMC, TR160Y dual-axis trunnion rotary table measures less than 25 in. wide and 20 in. deep, and fits on one end of machine's table. It has 160 mm T-slot platter, and will swing parts up to 7.5 in. dia. Trunnion provides ±120° of tilt and 360° of rotation for full simultaneous 5-axis motion, or to position parts to any angle. Powerful...

Read More »
Extra-Large VMC is designed to handle monolithic parts.
Communication Systems & Equipment

Extra-Large VMC is designed to handle monolithic parts.

With travels of 150 x 32 x 30 in. (XYZ) and 150 x 28 in. T-slot table, VF-12 accommodates large-volume machining requirements of aerospace, automotive, and mold/die industries. VMC comes in 40- and 50-taper configurations, with spindle speeds to 10,000 rpm, and is constructed to provide consistent repeatability. Standard equipment includes side-mount tool changer, chip auger system, programmable...

Read More »

All Topics