Haas Automation, Inc.
Oxnard, CA 93030
Lathe facilitates transition from manual machines to CNC.
Model TL-1 Toolroom Lathe operates in manual, semi-automatic, automatic, and full CNC mode. Utilizing 7.5 hp vector drive spindle that spins to 1,800 rpm, it provides max cutting diameter of 16 in. and max cutting length of 30 in. Brushless servo motors on all axes provide positioning, while 1-piece cast-iron base provides rigidity and damps vibration. Intuitive Turning System uses interactive...
Read More »
Vertical Machining Center is designed for mold makers.
Built with cast-iron construction, VM-3 employs 12,000 rpm inline direct-drive spindle powered by 30 hp vector dual drive system. Features include 40 x 26 x 25 in. work cube, 54 x 25 in. table with 4,000 lb capacity, and high-speed control with full look-ahead. Machine also incorporates internal ribbing on castings, linear guides on all axes, and brushless servos combined with fine-pitch...
Read More »
CNC Toolroom Mill offers XYZ travels of 40 x 16 x 16 in.
Model TM-2 includes large table that accommodates multiple vises and/or chucks, as well as 5C indexers and small rotary tables. All axes feature brushless servo motors, and 1-piece cast-iron base/column damps vibration. A 7.5 hp vector drive spindle uses standard 40 taper tooling and spins to 4,000 rpm. Intuitive Milling System provides interactive graphical environment and guides operator...
Read More »
Toolroom Lathe offers max cut diameter of 16 in.
Model TL-2 utilizes 12 hp, vector dual drive spindle, which spins to 1,800 rpm and provides 150 lb-ft of torque at 125 rpm. Max cutting length is 48 in. Max part swing is 19 in. over front apron and 11.1 in. over cross slide. Intuitive Turning System provides full-color graphical environment on LCD, which guides operator through steps necessary to machine part. Model TL-2 can operate in manual,...
Read More »
Horizontal Machining Center provides out-of-box solution.
Model EC-400 T-base horizontal machining center has work cube of 20 x 20 x 20 in., dual pallet changer with 400 mm pallets, and built-in rotary indexer. It comes with 8,000 rpm, 40 taper spindle powered by 20 hp vector dual drive system. Other features include side-mount tool changer, 1,000 ipm rapids, and coolant system. Unit automates chip removal via triple-auger chip conveyor system and...
Read More »
Vertical Machining Center offers 1,400 ipm traverse rates.
Model VF-2SS utilizes 12,000 rpm, inline, direct-drive, 40-taper spindle that is powered by 30 hp vector drive system and couples directly to motor. High-pitch ballscrews and servo motors on all axes provide rapid traverse rates of 1,400 ipm. Machine, based on Haas VF-2 platform with 30 x 16 x 20 in. travels, incorporates side-mount tool changer that holds 24 tools and one in spindle and...
Read More »
Bar Feeder automates small lathes.
Pneumatic Bar-100 handles stock up to 1 in. dia and provides fully automatic loading of single bars up to 6 ft long using air-driven push rod. When push rod is removed, bars up to 12 ft long can be loaded for manual feeding using bar puller. Draw-tube liner handles bar stock from 0.125-1 in. dia. Tray incorporates scale for measuring bar length. Setup is provided via 3-point leveling system,...
Read More »
Rotary Tables provide 5-axis capabilities.
Models TR160, TR210, and TR310 are 160, 210, and 310 mm rotary tables, with capacities of 80, 200, and 500 lbs, respectively. Dual-axis trunnions bolt directly to table of 3-axis VMC to provide 5-axis motion or to position parts to nearly any angle for multi-sided machining. All three tables are driven by brushless servo motors on both axes, and provide Ã-
Read More »
Lathe handles long parts.
Model SL-40L Long-Bed Lathe provides max cutting length of 80 in. and max cutting diameter of 25.5 in. It features 15 in. chuck and A2-8 spindle nose that provides bar capacity of 4.0 in. A 40 hp (peak) vector dual-drive system combines with high-torque gearbox to yield 1,400 lb-ft of spindle torque and provides speeds to 2,400 rpm. For large-diameter tubing, Big Bore version is available...
Read More »
Probe System simplifies routine machining setup.
Visual Quick Code (VQC) Probing System consists of spindle probe, contact tool setting probe, optical receiver, and Renishaw's Inspection Plus software. Machinists create probe routines for tool setting and part setup using graphical interface and question/answer format by entering basic information into the Haas control through Visual Quick Code.
Read More »