Thermo Electron
East Grinstead RH19 1UB GBR
Share:
Surge Simulator tests telecom equipment.
Model TSS500M/6B meets requirements of Bellcore GR 1089 for first- and second-level lightning surges on 2 or 4 telecom ports. It simulates 2/10, 10/360 and 10/1000 surge waveforms up to 5 kV. Pulse repetition rates vary from one every 2 sec for 2/10 pulse, up to one per min for 10/1000 pulse. Built-in voltmeter and current meter measure and record peak surge voltage and current. Simulator has...
Read More »
Cable Jacket is PVC laminated.
DVH-20 jacketing is constructed from medium-weight, flame-retardant PVC, laminated to both sides of polyester cloth. Reinforced construction provides resistance to wear, tears, and abrasion. Operating temperature is -40 to +85 deg C. Jacket is available for flat or round cable bundles from 3/8 to 4 in. in variety of colors.
Read More »
Conductivity Meter measures over wide range.
Micro 500, with auto-ranging capability, measures from 0 to 199.9 microsiemens per cm, 0 to 1999 microsiemens per cm, and 0 to 19.99 millisiemens per cm. It is accurate to +/-1% FS. This allows it to be used for applications ranging from testing deionized water to brine, routine monitoring of demineralization and other high purity water treatment operations, and obtaining solution conductivity...
Read More »
Fire Extinguisher protects electrical apparatus.
Electrical Fire Suppression System can detect fire inside enclosure and instantly release clean suppression agent to minimize damage to components and circuitry. It works inside mission-critical electrical enclosures and control panels such as PLCs, MCCs, and switch gear. Flexible polymer tubing that ruptures when exposed to flame can be routed anywhere within cabinet to automatically dispense...
Read More »
Hydraulic Excavator fits in tight places.
Model 308C CR works productively in areas as narrow as 9 ft 8 in., weighs up to 17,730 lb, depending on how it is equipped. Naturally aspirated, 4-cylinder, diesel engine produces 54 hp (net). Excavator accommodates 2 stick sizes, 4 bucket options, 2 blade widths and variety of work tools. When equipped with long stick, excavator has digging depth of 15 ft 5 in. Tail swing radius is only 4 ft 3...
Read More »
Motion Control System integrates in-drive PLC with controller.
Omega Drive Line II offers cam profile of 4096 points and resolution of 4 million ppr. PLC can process 100 microseconds per 1,000 lines of code, and controller has cycle time of 62.5 microseconds. CANsync field bus permits use of cluster concepts with several hundred axes synchronized within time frame of 1 ms and with transfer speed of 1 Mbps. PROPROG programming software supports IEC 61131...
Read More »
Shredders reduce waste volume.
Available as single or dual stage units, TASKMASTER twin shaft shredders reduce bulk solids and debris by up to 80%. They aid in recycling, protect pumps, and shred materials from documents and off-spec items to solid waste and sewage screenings. Units are designed with seal systems for wet, submerged, and dry operation. They are also available as complete systems in steel or stainless steel...
Read More »
Blind Rivet locks assemblies from both sides.
HuckLok(TM), with shear ring and lock groove, offers up to 1/4 in. grip and eliminates most pull-throughs when joining thin or lightweight materials, such as plastics, composites, and pliable metals. Double locking system secures connection. When used with Huck AK275 or 2025 tools, or any other blind riveting tool of proper pull capacity, HuckLok blind rivets install in seconds.
Read More »
Linear Actuators offer step increment of .02mm per step.
LC Series 15 mm captive linear actuators deliver over 4 N (1 lb) of thrust. They are suitable for hand held devices, office equipment, optics, machinery automation, and other automated devices which require precise remote controlled linear movements in very small package size. External linear versions are also available.
Read More »
Air Knife/Nozzle System offers fully adjustable speed.
Sonic XE Air Knife or Air Nozzle System incorporates Rotary Air Coupling to allow air transfer from stationary supply piping to rotating air knife or nozzle assembly with no blower pressure loss. Rotation is infinitely adjustable from 10 to 200 rpm by setting thrust jet valves on main body, allowing multiple passes over product. Non-lubricated assembly ensures clean and dry air delivery....
Read More »