Aprima Medical Software, Inc

3330 Keller Springs Suite 201
Carrollton, TX 75006

Mass Flow Controller also records and manipulates data.

Series DMF can be programmed for functions such as flow set point, totalizer, stop totalizer, totalize from preset flow, stop and preset auto, and auto zero. It has two outputs to operate pumps, valves or other equipment, and can control high and low alarm limits through its RS485 interface. Flow ranges vary from 0-10 sccm to 0-100 L/min with accuracy of Ã-

Non-Industrial Products

Paint Striper applies low-VOC paints.

Rollmaster can effectively apply mandated low-VOC traffic paints with 100% transfer efficiency. It has polymer pump rollers and bronze pump bushing, produces crisp line edges with no overspray, and can replace aerosol type stripers. It pumps paint directly from 1 gal can to application roller. Because it uses peristaltic pump, no paint contacts any pump components, making clean up quick with...

Test & Measurement

Pocket-Size Gauges measure thickness of materials.

Compact BNS series of dial gauges accurately measure sheet metal, card, paper and other materials up to 0.375 in. thick. Thickness measurement is displayed on clock face type dial within 0.001 in. Gauges fit comfortably in hand and slight pull on top plate opens chrome plated and lapped anvils, so material being measured can be inserted.

Wall Heaters keep remote areas warm.

Electric WAI and WCI Series Heaters are available in sizes from 2 kW to 4.8 kW. Commercial units have aluminum grille with dark brown powder coat finish. Industrial units have rounded corners, louvered 18-ga steel front grille, and white or almond powder coat finish for durability. Controls for both include built-in automatic reset thermal cutout for overtemperature protection, built-in...

Electrical Equipment & Systems

Tough Pushbuttons resist vandals and the environment.

Series 76-95 sealed pushbutton switches are made of stainless steel with vandal-resistant chrome button and bezel. Button only protrudes 0.10 in. from front panel, making it difficult for vandals to pry switch from its mounting. Switches can also withstand impacts of significant force. Snap-in switch elements are UL listed and CSA certified, have silver or gold contacts with current-carrying...

Machinery & Machining Tools

Molding Press compresses composite materials.

This 400 ton, down acting hydraulic compression molding press has 120 x 60 in. platens that are electrically heated with additional zones to assure temperature uniformity. It has integral hydraulic system, programmable control system, adjustable pressing speed, automatic bump cycle and audible alarm for cure cycle end. Press has reinforced moving bolster for rigidity and stability, fast close...

Vision Systems

Thermal Imaging Camera has software for predictive maintenance.

Hand-held MikroScan 7515 comes with thermal image analysis and report generation software, thus providing maintenance departments with complete thermal inspection system. Camera's fully-radiometric detector offers image resolution of 320 x 240 pixels, long wave imaging, and thermal sensitivity of 0.8Ã-

Electronic Components & Devices

Quick Release Pins require no tools.

Sky-Loc Rapid Release positive locking pins will not release until button on handle is depressed so balls retract into pin. Because pins can be removed without tools, they are ideal for quick change-over applications and field work. Pins are available in 17-4 and 304 stainless steel for commercial and industrial applications, respectively. All pins are stocked in four handle configurations with...

Non-Isolated VRM provides up to 45 W of power.

Suitable for power regulation applications using microprocessors, DSPs or bus drivers, PTK6700 Series accepts inputs of 3.3, 5, or 12 Vdc and provides single outputs that are 5-bit digitally programmable from 1.3 to 3.5Vdc. VRM has 13 A/45 W output power yet no external components or heatsink are required over ambient temperature range of -40 to +70Ã-

Ceramic Adhesive makes high temperature bonds.

Ceramabond 503 inorganic, water-soluble, alumina-filled adhesive system bonds nichrome heating element wire to mica ceramic parts so as to immobilize and electrically insulate wire from high temperature, high velocity air flows. It resists temperatures to 3200 Ã-ºF, can be applied by spatula, syringe or brush, cures in 1-2 hr at 700 Ã-ºF, and strengthens further to lap shear strength of...