Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Clock Oscillator and VCXO offer frequencies up to 800 MHz.
M5RJ clock oscillator and MPV3J VCXO are available with LVPECL or LVDS output in 9 x 14 mm J-lead ceramic package. Both 3.3 V units have maximum integrated jitter as low as 0.5 ps rms (12 kHz to 20 MHz) at frequencies over 600 MHz. They are suitable for Optical Carrier and Gigabit Ethernet applications.
Read More »Converters offer 16-bit resolution and +/-.005 deg accuracy.
Synchro to Digital Converters are designed to convert 2-speed Synchro or Resolver inputs of 11.8 V, 26 V, 90 V 400 Hz, or 90 V 60 Hz into 16-bit parallel binary outputs respresenting angle. Speed ratios of 1 x 10, 1 x 18, 1 x 36, 1 x 8, 1 x 16, 1 x 64, and 1 x 128 are available. Converters track rates up to 1000 deg/sec. They have DC velocity output and built in test (BITE) with digital...
Read More »Synchro To BCD Converters mount on PC boards.
SBC40 series converts synchro or resolver inputs of 11.8 or 90 V at 400 Hz into 3 or 4 decade BCD data representing angle with accuracy of Ã-
Read More »Clean Process Oven for semiconductor industry.
LCC2-14 has chamber volume of 14 cu ft, large enough to handle thermal processing of 200 and 300 mm semiconductor wafers. It has stainless steel interior with continuously welded seams to protect work chamber from contamination. Oven is SEMI S2 and CE compliant, can be configured for multiple voltages and 50/60 Hz, and has UL and C-UL listed open control panel with lockable disconnect switch....
Read More »Post Processor generates NC code.
VEGAPost 3/5 axes NC Post Processor allows for multiple files to be selected for posting, displays which files are done, and flags data errors. It includes feedrate, rapid command, and spindle speed override; axis sweeping, mirroring, and scaling; reverse data; and insertion of cycle commands. Five Axes features include head unwinding/rewind, tool length compensation, prompting for tool...
Read More »Replicating Tool facilitates assay miniaturization.
High-Density Replicating (HDR) Tool transfers submicroliter volumes on Biomek FX Liquid Handling System. In 96- or 384-pin configuration, it can array multiple spots in single plate well. Each pin can be removed to create patterns for glass slide microarrays. Pins for HDR tool are available in 3 shapes and 2 diameters (0.015 and 0.045 in.) allowing users to fine-tune configurations for specific...
Read More »Miniature Inductors can be surface mounted.
SMI-2 Series inductors are suitable for switchmode and RF applications at various currents. Inductance values range from 10.0 microHy @ 2.57 A to 560.0 microHy @ 0.25 A. Tolerances are 20% for 10.0 to 47.0 microHy values and 10% for 56.0 to 560.0 microHy values. Typical dimensions are 0.302 x 0.276 x 0.198 in. With pads solder-masked to core, inductors can be IR or vapor phase soldered directly...
Read More »Line Locator pinpoints transmitters in pipes and drains.
NaviTrack(TM) utilizes real-time liquid-crystal mapping display to guide operators to exact location of target, regardless of how unit is held. It can locate underground cast-iron pipes, water lines, electrical lines, and other metallic cables. Search mode uses gauges and audio signals. Map mode locates transmitter and maps direction of pipe. Trace mode locates energized lines and power lines....
Read More »Spectroscopy System offers max scan range of 70 mm.
LEIS270 Localized Electrochemical Impedance Spectroscopy system, combined with existing electrochemical impedance measurement system provides capability to obtain spatially resolved voltage and current-based impedance data. Precise placement of scanning probe is achieved via optical encoders on all 3 axes. Single frequency scan of sample allows for mapping of impedance values in 2-dimensional...
Read More »Drilling System is equipped with OTT hydraulic drawbar.
Mold block deep hole drilling system offers optional secondary operations head (EZ-HEAD) for milling up to 5 in. dia, tapping from 1.5 to 11.5 NPT (max), and counter-boring to 3 in. dia. Combination gun drill/BTA machine has 2 in. dia drilling capacity and 84 in. drilling depth (stroke). Four-axis machine features 84 x 84 in. work table with load capacity to 100,000 lbs. Its column provides 84,...
Read More »