Hella KGaA Hueck & Company
Lippstadt 59552 DEU
Share:
Cell Workstations create a continuous work area.
Corner and Stand-Alone Stations minimize material handling and organize tools, parts, and components. They are height-adjustable from 30 in. to 36 in., and support up to 750 pounds. Constructed of 12 and 14 gauge steel, they feature abrasion resistant epoxy powder coat finish. Type U or L designs may be modified or enhanced.
Read More »
Manual Roll Groover is constructed of ductile iron.
RIDGIDÃ-® 915 portable roll groover is designed to groove in-place pipe ranging from 1-1/4 to 12 in. diameter. It grooves steel pipe up to 12 in. Schedule 10; up to 6 in. Schedule 40 for steel, aluminum and stainless steel, 2 to 8 in. copper tubing; and 1-1/4 in. to 12 in. Schedule 80 PVC. Unit uses interchangeable roll sets for handling all pipe sizes. It requires 3-1/2 in. clearance around...
Read More »
Hammer-Drill Kit drills concrete, steel, and plastics.
Model 5371-21 double insulated, 1/2 in., dual-torque MagnumÃ-® Hammer-Drill Kit features metal gear housings. Its 5.5 amp motor and dual-torque gearbox provide high-speed drilling (0-2500 rpm) with smaller bits, and ample torque for larger bits in low-speed range setting (0-1000 rpm). Hammer-Drill also features variable speed switch with reverse and selector for hammer with rotation, and...
Read More »
Moisture Resistant Encapsulant has smooth consistency.
Tra-Bond 933-1.5 electrically insulating epoxy encapsulant is formulated to provide smooth crowns over devices of wire bonds. Encapsulant provides protection from thermal and mechanical shock. Compound is stable at room temperature for up to three months, but is best kept stored at -40Ã-
Read More »
Press Manifold System Blocks provide self-monitoring.
Hydraulic Press Systems Program NG 6, 10, 16 and 25 blocks are designed in modular format. Sizes are determined by main directional/proportional valve size. Press blocks are equipped with safety valves, pressure control, and directional valves depending on press functions. Standard solenoid operated directional on/off valves or proportional valves are employed. Cartridge valves to DIN 24342 are...
Read More »EL Lamp Driver replaces LEDs for backlighting.
MIC4826 and MIC4827 electroluminescent lamp driver ICs independently set boost converter frequency and EL lamp frequency. Lamps accept 1.8 to 5.5 V input range, allowing direct operation from two-cell Alkaline/NiCad/NiMH or one-cell Li Ion batteries. MIC4826/7 are housed in MSOP-8 packages, require 6 external passive components, and have peak-to-peak regulated AC outputs voltages of 160V and 180V...
Read More »
Chamfer Drills are made of solid carbide
SD10, SD20 and SD25 Super Alloy geometry chamfer drills and intermediate and semi-standard solid drills are available with diameters from 3mm to 18mm. All drills are TiAIN coated, with an outer layer of TiN. They are self-centering, provide excellent chip control in most materials, and are suitable for use in unmanned machining. Drills have large back taper and conical-shaped front point for...
Read More »
Level Switch uses tuning fork sensor.
LZ10 Tuning Fork Level Switch vibrates at nominal frequency of 400 Hz. As switch becomes immersed in liquid or slurry, corresponding frequency shift occurs. When measured frequency shift reaches setpoint value, switch changes state indicating presence of liquid or solid medium. It is suitable for liquid applications with light to medium coating or scaling-type characteristics, or lightweight...
Read More »Pushbutton Switches provide security in harsh environments.
AV series pushbutton switches are suitable for applications where control panels are in high traffic or unsupervised locations, such as process control panels. Each has metal bezel with low profile shape that prevents attempts to remove switch from front of panel, anti-jamming construction, reduced actuator travel to prevent insertion of foreign parts, and solid mechanical stop inside metal bezel...
Read More »Faceplate Handles are used for CompactPCI equipment.
CP-HP Series Handles are fully compliant to IEEE 1101.10, PICMG 2.16 CompactPCI, VME, and Eurocard specifications. They have dual locating pins which assure horizontal and vertical alignment for wide range of faceplates in applications including electronic enclosures, printed circuit, computer, datacom/telecom, industrial control, security, and test and measurement. Handles are easily mounted...
Read More »