Tacton Systems
Stockholm 111 22 SWE
Share:
![Power Chuck offers clamping forces from 26-500 kN.](https://cfnewsads.thomasnet.com/images/medium/455/455606.jpg)
Power Chuck offers clamping forces from 26-500 kN.
Providing jaw strokes from 10-18 mm per jaw, 2-Jaw Rota 2B includes integrated feed-thru and mounting features for irregular workpieces. Seals and wipers placed in crucial areas help reduce contamination of chuck body and facilitate grease retention. Chuck is suited for both turning centers and stationary applications.
Read More »![Vacuum Pump suits general laboratory applications.](https://cfnewsads.thomasnet.com/images/medium/455/455605.jpg)
Vacuum Pump suits general laboratory applications.
Air Cadet PRO(TM) features gas ballast for purging of contaminants that may condense in pump head. It achieves flow rates of 0.5-1.4 cfm at vacuum level of 56-6 torr, and operates at 37 dB. Hose barb connections measuring 5/16 in. make pump adaptable to any laboratory application ranging from filtration to degassing and vacuum drying. Unit can be placed on countertop or below bench to maximize...
Read More »![Gage combines manual operation with CMM capabilities.](https://cfnewsads.thomasnet.com/images/medium/455/455604.jpg)
Gage combines manual operation with CMM capabilities.
Model CP1057Ã-® 3-D Flexible Gage uses manually-controlled drive to position instrument on same surface plate to which workpiece is fixtured. Measuring range of 1,000 x 500 x 750 mm can be increased using optional data joint function, which enables movement of instrument during data collection. Suited for measurement and scribing of sheet material workpieces, as well as measurement of large...
Read More »Lighting Fixture suits commercial/industrial applications.
Illuminator Series(TM) Model 4I4 is a 4-lamp fixture suited for applications that have ceiling heights from 14-100 ft. It provides full-spectrum light while using half the energy of standard high-intensity fixtures. Utilizing fluorescent lamps and electronic ballasts, Illuminator Series captures 360Ã-
Read More »![Vision Measuring System facilitates process management.](https://cfnewsads.thomasnet.com/images/medium/455/455601.jpg)
Vision Measuring System facilitates process management.
Ball Endmill Vision Measuring System features chuck that holds endmill, allowing it to be rotated as system measures R-contour resulting from grinding. Digital angle counter indicates positions of endmill cutting edge as it is rotated. Vision unit captures images for analysis by QSPAKÃ-® software, which compares actual and nominal values to determine edge wear. System handles workpieces from...
Read More »![Power Lathe Chuck is sealed against chips and swarf.](https://cfnewsads.thomasnet.com/images/medium/455/455600.jpg)
Power Lathe Chuck is sealed against chips and swarf.
Available in sizes from 165-500 mm, ROTA NCO offers clamping force from 95-330 kN with jaw strokes from 9-15 mm per jaw. Chuck is intended for vertical turning centers where contaminants are a hindrance. It offers options for automated part recognition in unmanned operations, as well as feed-through capabilities for coolant, air, or oil.
Read More »![Stationary Vise offers multiple part clamping.](https://cfnewsads.thomasnet.com/images/medium/455/455599.jpg)
Stationary Vise offers multiple part clamping.
Available in 3 lengths, KONETEC KSM system consists of corrosion-resistant 65 or 90 mm wide clamping rail with vertical serration on inner side that allows jaws to be positioned with one hand. Based on wedge-hook principle, vise jaws are reversible and have smooth or serrated surface. Since no chips can jam rails, system is protected against damage and wear. Vise has mounting bores for assembly...
Read More »![Clamping Vise is resistant to contamination.](https://cfnewsads.thomasnet.com/images/medium/455/455598.jpg)
Clamping Vise is resistant to contamination.
KONTEC KSL stationary clamping vise allows cubic workpieces to be clamped onto universal vertical machining centers or any 4th or 5th axes table. Available in 3 sizes with base jaw widths of 100, 125, or 160 mm, mounting holes located in jaw allow mounting of workpiece stops from both sides. Actuation is done from side of the fixed jaw via allen key equipped with ratchet, and vise securely clamps...
Read More »Vibration Dampening System is designed for mezzanines.
Intended for applications where sound and vibration are detrimental to process operation, noise and vibration dampening system employs mezzanine deck comprised of alternating isolated layers of solid, soft, and acoustical materials. Fastening system eliminates transfer of vibration and sound between layers, while isolation barrier is utilized between beams and columns and between columns and...
Read More »![Measurement System features moving bridge design.](https://cfnewsads.thomasnet.com/images/medium/455/455595.jpg)
Measurement System features moving bridge design.
Multi-sensor SmartScopeÃ-® Flash 1500 has instrument head that moves along steel bridge in X axis, and entire bridge moves in Y axis. Staged part remains stationary, while optics/bridge translations are performed rapidly with positioning accuracy. Offering 36 x 60 x 8 in. XYZ travel in floor stand system, applications include measuring plasma display panels, large metal or plastic modules,...
Read More »