Leica Geosystems Inc.    Norcross, GA 30092
May 09, 2005 System 1200 GPS is offered with seismic stakeout application software package that ensures field crews do not intrude on exclusion zones when placing seismic charges and sensors. After user enters predefined data set of exclusion zones into System 1200, system will provide audible warning whenever crews attempt to place stake in prohibited area, thereby avoiding damage to nearby water wells, pipelines, or buildings.

EPCO    Fremont, OH 43420
May 06, 2005 Made of 660 bronze, Split Movable Platen Bushings enable replacement of machine’s platen bushings without requiring removal of tie bonds. This helps prevent machine problems cause by worn platen bushings, such as sagging, lubrication problems, clamp ram packing leaking, and platens out of parallelism. Included weld rings come drilled, tapped, and assembled.

Kinetic Systems, Inc.    Boston, MA 02131
May 04, 2005 Available in custom sizes or shapes with extra leg supports and cutouts or notches, 9300 Series provides omni-directional, ultra-low-frequency vibration damping as well as automatic leveling. It is composed of 2 in. composite layer between ½ in. top and bottom plates of corrosion-resistant steel. At up to 25,000 lb load, vibration isolation efficiencies can be as high as 98% for vertical natural frequency and 96% for horizontal natural frequency.

Advance Lifts, Inc.    St. Charles, IL 60174
May 04, 2005 Offered in various capacities, sizes, and travels, combination lift and tilt table line of work positioners tilt bins of parts for order picking or position loads for assembly operations. Lift tables raise loads up and down for ergonomic positioning, while tilt tables position load up to 60°. Lift and tilt operations are individually controlled via joystick. Products use lifetime-lubricated bearings on all pivot points and have chrome plated axles and shafts.

ACE Controls, Inc.    Farmington, MI 48335
May 03, 2005 Designed for high-speed production equipment, miniature SC 650-HC features rod-ready time that facilitates cycling and enables gains in production time. Product, capable of rapid repeat strokes, features return force rated from 4.94–8.30 lb and return time of 0.20 sec. Absorbing up to 1,200 lb-in. energy per cycle, unit is suited for packaging industry equipment and rotary actuators as well as robotics, machine tools, and pick and place operations.

Whitney Blake Co.    Bellows Falls, VT 05101 0579
Apr 25, 2005 Intended for OEMs, Coil Tether uses pre-coiled urethane cable that is resistant to salt water and chemicals. Non-corrosive and non-abrasive base material contains environmentally safe electrical insulator. Tether is offered in standard and custom lengths, and may be configured with clips, wrist bands, and clasps. Applications include employee key/tag holders, security device items, personal data devices, writing instruments, and signage.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Apr 18, 2005 SkyPositionerâ„¢ consists of removable, platform-mounted positioning system that can be installed on Model 3394RT and 439RT rough terrain scissor lifts to lift, hold, and position material during installation. With 2 interchangeable heads, system allows operator to lift pipe or duct as high as 78 in. above scissor lift deck. Both heads have 1,000 lb capacity and can hold lengths up to 21 ft, pipe up to 8 in. diameter, and duct up to 49 in. across.

Tapeswitch Corp.    Farmingdale, NY 11735
Apr 15, 2005 Hercules Sensing Bumpers are encapsulated in polyurethane shell that meets MIL-STD-810E salt fog requirements and is resistant to many chemicals, lubricants, and solvents. Surface is crush-resistant, impact-resistant, and abrasion-resistant. Available in widths of 4 and 7 in., heights up to 18 in., and lengths up to 16 ft, bumpers feature fail-safe wiring and bolt-on installation. They are suited for wet or dirty conditions and can be used indoors or out.

Advanced Anti-Vibration Components - AAC    New Hyde Park, NY 11040
Apr 14, 2005 Series V10Z4 features Finger Flex ring and bushing isolators designed for loads up to 37 lb per mount. Radial fingers on top and bottom surfaces absorb vibration parallel to axis of mounting. Available in 30 and 60 durometer hardness, corrosion-resistant, zinc-plated mounts feature natural frequencies from 6-30 Hz, 1 1/8 in. freestanding height, 2 3/8 in. square base dimension, and 4-hole tie-down pattern that conforms to MIL-Size 2.

Advanced Anti-Vibration Components - AAC    New Hyde Park, NY 11040
Apr 14, 2005 Light-duty Series V10Z22 ranges in static load capacity from 1.55-132.30 lb with natural frequency of 7-10 Hz vertical and 4.5-6 Hz transverse, for displacement input of ±.030 in. Units have stainless steel springs and mesh pads enclosed in aluminum alloy housing. Heavy-duty Series V10Z28 ranges in static load capacity from 10-1,000 lbs with natural frequency of 13-17 Hz for amplitude of ±.012 in. Units feature knitted stainless steel mesh and Alochrome 1200-coated aluminum alloy housings.

Pinpoint Laser Systems    Peabody, MA 01960
Apr 14, 2005 Used to precisely adjust or level machinery, Microshim is milled from solid block of aluminum and protected with hard anodized coating. Compact unit lets user adjust stainless steel lifting bolt to raise or lower machine. Each shim can lift and support 10,000 lb and offers height adjustments of 0.001 in. Applying adhesive to 2 sliding surfaces allows for adjustment before unit is permanently locked to specific height.

Lift Products, Inc.    Elm Grove, WI 53122 0349
Apr 13, 2005 Roto-Max Work Positioners let operator determine exactly where workload is to be positioned, depending on height of individual. Available in capacities of 2,500, 3,000, and 3,500 lb, units offer lift speeds from 10–19 seconds. Lowered height of 6.5 in. gives operator access to top layer of product, while raised height of 32.5 in. is suited for most applications.

Presto Lifts, Inc.    Attleboro, MA 02703
Apr 06, 2005 Available in capacities up to 4,000 lb, hydraulic P4 is accessible from all 4 sides and designed for use in manual loading and unloading of pallets. Platform lowers to floor height so pallets can be placed and removed using hand pallet truck. In loading and unloading operations, product enables successive approach to pallet handling. It has 28 in. vertical travel and features photoelectric toe guard that stops downward travel if interrupted.

Rite-Hite Aftermarket Corp.    Milwaukee, WI 53223
Mar 31, 2005 Dok-Guardianâ„¢ protects employees and material handling equipment from falling off vacant loading docks. Measuring 47 in. tall, Common Member option facilitates installation of multiple units, which are adjoined or connected at loading dock. Unit for heavy-duty Model SB-5000 is made from ¼ in. steel, while guard for light-duty Model SB-2500 is 3/16 in. steel. Both common member guards are powder-coat painted safety yellow, and have ¼ in. steel latching brackets.

Schleuniger, Inc.    Manchester, NH 03103
Mar 28, 2005 Suited for wire harness manufacturing facilities, CrimpCenter 60 and CrimpCenter 70 accommodate up to 4 processing stations and can process applications with weather seals, doubling, twisting, and tinning. Production data is entered into Windows-based software via touch-screen interface and can be recalled for future job changes. Machines can be networked for production allocation and tracking.

Molex Inc.    Lisle, IL 60532-1682
Mar 22, 2005 Used horizontally or vertically, rotatable optical adapters add EMI shielding and flexibility to existing cable management solutions. Products, offered as LC duplex, SC simplex, or MPO simplex, allow cable-exit angle to be re-positioned from standard straight-mount position (90° to faceplate) to ±35° in either direction. Available for single- and multi-mode applications, they include locking set-screw and die-cast adapter with EMI gasketing.

E-A-R Specialty Composites    Indianapolis, IN 46268 1650
Mar 21, 2005 ISODAMP C-8002 thermoplastic molding material dissipates energy internally, at molecular level, minimizing vibration amplification at resonance to restore equilibrium to sensitive, precision systems. Injection-moldable formulation is environmentally clean, wear-resistant, and adhesive-friendly. Flame-resistant to UL 94 V-0, soft and pliable product is available in custom-engineered configurations or range of standard grommets, mounts, and isolators.

Sola/Hevi-Duty, EGS Electrical Group    Rosemont, IL 60018
Mar 18, 2005 Specifically engineered for S1K Series Off-line UPS, S1K Wall/Panel Mount Kit delivers safety, stability, and support. Mounting kit can be used to mount UPS in control panel or wall mount, or as integrated part of enclosure or machine, and is made to accommodate precise dimensions of power system.

Easyfit, Inc.    Beachwood, OH 44122
Mar 16, 2005 Double Swivel Kit EF47G and 90° Corner Swivel Kit EF48G can be used to fasten middle rails to uprights in sloping handrails or provide bracing to structure. Former features double male swivel fitting and provides in-line angle joint at post, while latter is equipped with EF38 90° corner male swivel fitting. Available in sizes to fit 1, 1¼, and 1½ in. pipe, both kits include 2 EF36 single female swivel fittings and require no welding to install.

Trion Industries, Inc.    Wilkes Barre, PA 18702 6997
Mar 14, 2005 Able to secure scan hooks up to ¼ in. dia and retrofit to existing hooks already in place, key-lock system enables users to secure all products or display one or 2 items while balance of stock is locked. Swing-aside access does not require removal in order to sell product, and unit re-locks without key. Optional security plate works with most metal and plastic backplate designs to provide additional theft deterrence.