Mounting & Attaching Products

Electronic Components & Devices, Mounting & Attaching Products

Compression Connector offers 28+ Gbps transmission speed.

Oct 13, 2015

With 1.22 mm profile, IT11 Series single-mold compression connector provides second source for cStack™ and cLGA® products from Amphenol Intercon Systems. Signal integrity is optimized with 6 x 25 pin grid configuration, and standard 150- and 210-position versions have respective contact pitches of 1 and 1.27 mm. Custom positions are also available with pin counts up to 3,000+. Design uses... Read More

Material Handling & Storage, Mechanical Power Transmission, Mounting & Attaching Products

Support and Actuator System works in ultra-high vacuum conditions.

Oct 12, 2015

Optimized for load capacity and stiffness, mechanical systems employ strut-based mounting system that minimizes vibration and allows facilitated and precise (sub millimeter) position adjustment of hardware without adding stress or distortion. Strut mechanical positioner has up to 6 degrees of freedom: translational (X/Y/Z) and angular (pitch, roll, and yaw). While smallest design supports 200... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Mechanical Connectors feature anti-turn design.

Oct 09, 2015

With anti-rotation feature, Type ATTA and ATAU Connectors minimize risk of movement at installation. Connectors are manufactured from high strength aluminum alloy and are suitable for use with copper or aluminum conductor. Units feature chamfered wire entry that facilitates conductor insertion. UL Listed and CSA Certified, connectors are available in 1- or 2-wire port design with various hex size... Read More

Agricultural and Farming Products, Construction Equipment and Supplies, Material Handling & Storage, Materials & Material Processing, Mounting & Attaching Products

Weld-On Plate enhances John Deere 500 Series loader functionality.

Oct 09, 2015

Measuring 49.38 x 22.85 in., John Deere 500 Series Weld-on Plate is formed from 5/16” steel, designed to be welded to existing attachments, and interfaces with John Deere 500 Series loaders that use JD attaching system. Features, including steel cast upper hooks and welded locking pins spaced to OEM specifications, ensure proper fit when welded to buckets or attachments. Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Wire-to-Wire Connectors feature IP67 rating.

Oct 08, 2015

Capable of delivering 14 A, DF63W Series features slim design and all-plastic shell with smooth contour, suited for wiring in small spaces. IP67 water-resistant protection is accomplished utilizing wire seal and housing seal that is pre-assembled in housing. Available in 2-position single-row, 3-position double-row, and 4-position double-row versions, in-line power connectors accept 16–22... Read More

Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products

Stainless Steel Lashing Cable eliminates kinks, tangles, snags.

Oct 07, 2015

Available in .038, .045, .061, and .065 in. dia, Stainless Steel Lashing Wire comes in 3 grades – Type 430 Stainless, Type 302 Stainless, Type 316 Stainless – can be loaded into cable lashing machines (or spinners) and used to spirally wind (lash) telephone, power, and multi-media cable to supporting messenger strand between utility poles. Uniform fine grain structure is featured... Read More

Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment, Mounting & Attaching Products

Male Luer Lock Connector features 0.262 in. OD port.

Oct 07, 2015

Featuring clear polycarbonate body and tip that allow for transparent view of fluid, Breakable Male Luer Lock Connector is E-Beam, EtO, and Gamma sterilization compatible. Unit isolates media in bag port until needed, eliminating use of spikes or needles. When snapped, break-off tip floats to top of bag, identifying separation and permitting flow. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Modular Connector brings IP69K protection to splash zones.

Oct 06, 2015

Han® F&B connector series brings modular, user-configurable connectivity with IP69K protection to splash zone (Zone 2) in food and beverage production. Made of non-toxic PP plastic, these FDA 21-approved circular connectors exhibit resistance to chemicals, heat, cold and Ecolab-certified cleaning agents. End-users can select from 25 Han® 3A contact inserts for transmitting power (up to 40... Read More

Materials & Material Processing, Mounting & Attaching Products

Cabin Doors on the Airbus A350 are Lifting off with a Primary Structural Component Made from Victrex® Peek Polymer

Oct 06, 2015

WEST CONSHOHOCKEN, PA USA – Airbus Helicopters is replacing aluminum in a fitting in the aircraft door of the Airbus A350-900 with a high-modulus, carbon fiber-reinforced high performance polymer. The brackets, now manufactured from VICTREX® PEEK 90HMF40, has been developed by Airbus Helicopters and is in serial production for commercial use after receiving the relevant component... Read More

Construction Equipment and Supplies, Materials & Material Processing, Mounting & Attaching Products

Weld-On Plate supports John Deere 300/400 loaders.

Sep 29, 2015

Measuring 49.38 x 19.40 in., John Deere 300/400 Series Weld-on Plate is formed from 5/16 in. steel and is designed to be welded to existing attachments, allowing them to be used with John Deere 300/400 Series loaders that use JD attaching system. Plate features steel cast upper hooks and welded locking pins spaced to OEM specifications, ensuring proper fit when welded to buckets or attachments. Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products

Branch Line Restraint System increases reliability, safety.

Sep 29, 2015

Offering adaptable bracing solution, B-Line™ series TOLCO™ Branch Line Restraint (BLR) system helps prevent movement and damage of fire sprinkler branch lines during earthquakes. TOLCO BLR structural and pipe attachments are UL®-listed and FM-approved for both steel and plastic CPVC sprinkler systems. Snap-on design allows one-handed installation and is sturdy enough to hold load.... Read More

Mounting & Attaching Products

Engine Mounts for Boats reduce vibration at low speeds.

Sep 28, 2015

To promote passenger comfort on marine vessels, high deflection (HD) Cushyfloat alleviates excessive vibrations caused by increases in engine power. Rubber compound helps optimize vibration isolation when travelling at low speeds, vertical and lateral buffering limit movement of engine, and built-in deflection gauge simplifies engine installation/alignment. Also available, mini HD Cushyfloat... Read More

Fasteners & Hardware, Mounting & Attaching Products

Heat Sink Mounting System features 3-piece design.

Sep 24, 2015

Consisting of PEM® Type HSCB™ captivating screw and PEM Type HSL™ spring mated to PEM Type HSR™ broaching receptacle nut or standoff, Heat Sink Mounting System securely attaches heat sinks to PCBs while providing firm and constant contact to chip component for optimized heat dissipation. Audible click serves to prevent over tightening by signaling when screw is fully engaged. Screws and... Read More

Mounting & Attaching Products, Portable Tools

Inflatable Shim supports up to 300 lb.

Sep 23, 2015

Spanning gaps from 3/32 to 2 ½ in., AirShim Inflatable Pry Bar and Leveling Tool allows single installer to position and hold items in place. Contractor-grade inflatable bag offers one-handed operation using squeeze pump and precise bleeder valve, letting user raise and lower to perfect alignments. With no-scuff cover, AirShim is suited for installing appliances, beams, cabinets, doors,... Read More

Mounting & Attaching Products

New Line of E-Style Cuff Flange Metal Bellows Added to Webstore

Sep 21, 2015

Ormond Beach, FL  – BellowsTech has expanded its line of edge welded bellows presently being offered on their online web store. Their new series of E-style Cuff Flange metal bellows are available in 18 sizes with diameters from 0.40 to 5.45 inches. Products can be easily ordered in specific segment lengths from 10 – 200 convolutions. A built in configurator automatically calculates spring... Read More

Material Handling & Storage, Mounting & Attaching Products, Optics & Photonics

Tip/Tilt Piezo Stage targets research and OEM markets.

Sep 18, 2015

Featuring position noise of 0.2 microradians with strain gauge sensors, Model RXY3-410 provides accuracy for advanced applications, such as beam steering, image stabilization, and laser scanning. Piezo-driven, flexure-guided device is characterized by travel of 3 mrad for tip and tilt motion and resonant frequency of 1,400 Hz, which allows for scanning and settling times of less than 3 ms. Design... Read More

Mounting & Attaching Products

Elevating Pedestal increases camera shooting versatility.

Sep 17, 2015

Designed to maximize space, Televator® Elevating Pedestal EP6 Mini comes in 2 sizes suited for such smaller robotic camera applications as broadcast news flash studios, corporate production, and distance learning lecture halls. Among other features are variable speed with 32-bit encoding for smooth acceleration and deceleration; accurate, absolute positional servo; and auxiliary control bus... Read More

Material Handling & Storage, Materials & Material Processing, Mounting & Attaching Products

Tool Cart targets industrial plastic molding industry.

Sep 16, 2015

Designed as 4-layered shelving system with high side-walls and rubber-coated surfaces to keep tools/parts in place, IMS ResQ Cart facilitates access and storage of critical components needed to fix, plumb, set-up, or switch a run. Unit is equipped with 5 in. swivel/locking casters and sturdy work table with 350 lb capacity. Industry-specific features include hanging waterline hose mounts, guide... Read More

Computer Hardware & Peripherals, Mounting & Attaching Products

Platinum Tools® Features EZ-DataLock(TM) Strain Relief at 2015 CEDIA Expo

Sep 16, 2015

Now Shipping, Patented Design Prevents Cable Disconnects, Malicious Disconnects, Unauthorized Access, Downtime, and Tampering NEWBURY PARK, Calif., - Platinum Tools - (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce it will feature the EZ-DataLock™... Read More

Mounting & Attaching Products, Optics & Photonics, Robotics, Vision Systems

Telemetrics Displays Innovative Broadcast Solutions at IBC

Sep 16, 2015

High-Performance, Durable and Flexible Products, Designed to Meet Demanding Broadcast Requirements Rai, Amsterdam  - At this year’s IBC, Telemetrics is demonstrating new and proven products that showcase a commitment to innovation and can drastically improve the quality and performance of new and existing live production facilities. With a range of products including elevating pedestals,... Read More