Mounting & Attaching Products

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Multipole Connector Panel Supports increase versatility, access.

January 19, 2016

COB (connector on board) series does not require metallic enclosures to use multipole connectors inside electric panels; protection is provided by electric panel itself. While interchangeability of connector inserts increases versatility, rear access to inserts via turnover device facilitates wiring inspection and tests with coupled connectors. Mobile parts are prearranged for clamping of... Read More

Mounting & Attaching Products

Bellows Couplings absorb vibration and allow misalignment.

January 19, 2016

Combining polymer resin bellows and zero backlash aluminum hubs, BELLOWFLEX Couplings allow angular misalignment up to 10° and handle shaft speeds from 5,500–9,000 rpm, depending on model. Electrically insulating bellows prevents electrical current from passing between system shafts through coupling. Available in 3 sizes, with bore range of 3–18 mm, couplings are suited for stepper... Read More

Electrical Equipment & Systems, Mechanical Power Transmission, Mounting & Attaching Products

Feed Through Panel/Plate handles up to 37 cables.

January 15, 2016

Offering panel feed-through solution especially suited where panel-mounted connectors are not preferred, Cable Entry System (CES) Multigates consist of space-saving, metal-reinforced cable entry plates. Double-membrane sealing ensures IP66/67 protection, and oil-resistant construction features UL 94 V0 flame rating and -40 to +100°C temperature rating. Products handle up to 37 cables... Read More

Mounting & Attaching Products

Stainless Steel Clad Aluminum Bumper replaces plastic bumpers.

January 15, 2016

Offered as stainless steel clad aluminum bumper for International® ProStar®, All Makes AERO CLAD® replaces 3-piece plastic bumpers on trucks built February 2015 and later without negatively affecting fuel efficiency. Product, which includes fixed mount bumper brackets and plastic bumper-to-hood trim, offers appearance and finish of chrome, is corrosion resistant, and is less weight... Read More

Mounting & Attaching Products

Precision Ring Drive Indexer mounts in any orientation.

January 13, 2016

Offering alternative to direct drive motors, PRD Precision Ring Drive Indexer can start and stop at any incremental position. Motion profile is easily changed by loading new servo drive program into system. PRD combines Roller Pinion System technology with precision-grade bearing and gearhead. Supported by high-capacity cross-roller bearing rated for loads up to 1,575 kN, table is capable of... Read More

Display & Presentation Equipment, Electrical Equipment & Systems, Mounting & Attaching Products

Panasonic Develops Single Cable and Connector Solution for Transmission of Full-spec 8K Video Signals*1

January 8, 2016

OSAKA, Japan – Panasonic Corporation today announced that it has developed single cable and connector solution that enable the transmission of uncompressed full-spec 8K video signals(*1). Currently, to transmit video signal via connector-equipped cables from an 8K signal source or other devices to an 8K display, 4K-equivalent images are transmitted using four HDMI cables, and are then... Read More

Mechanical Power Transmission, Mounting & Attaching Products

Top-Mount Smart Valve Positioner optimizes flow control.

January 7, 2016

Designed to mount directly to top of control valve, Research Control® SRD991 uses linear connection, which mitigates hysteresis between positioner and actuator by feeding back actual position of actuator consistently and accurately. Unit is available with graphical LCD screen, 2 levels of diagnostics, and variety of protocols including HART, PROFIBUS-PA, and FOUNDATION Fieldbus H1. All... Read More

Mechanical Power Transmission, Mounting & Attaching Products

Miniature Piezo Hexapod provides dynamic error correction.

December 28, 2015

With 1,500 g load capacity, 6-axis Model P-915KWEF is designed for dynamic error correction for 6° of freedom. Capacitance direct metrology sensors and parallel-kinematic design with piezo actuator direct drives result in compact and stiff positioning solution. Product provides 1 nm linear resolution, 0.07 µrad angular resolution, and positioning range up to 70 µm. Mounted inside rotary... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Board to Board Connectors have flexible, space-saving design.

December 23, 2015

Allowing flexibility for high-density board spacing, PSMP interface has 3-piece design with minimum board spacing of 12.6 mm suited for blind-mating situations. Connectors are intended for applications rated up to 200 W at frequencies of 2.2 GHz and have operating frequency up to 10 GHz. Available in smooth bore, limited detent, and full detent configurations, products also exhibit flexibility... Read More

Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment, Mounting & Attaching Products

Needleless Injection Sites feature barbed, swabbable design.

December 18, 2015

Available with barbs to fit 1/8, 3/16, and ¼ in. ID tubing, Models #80209-#80211 feature swabbable luer-activated female luer lock for aspiration and injection. Injection sites are made of tinted polycarbonate housing and latex-free silicone valve. Products are EtO and Gamma sterilization compatible. Read More

Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment, Mounting & Attaching Products

Swabbable Needleless Injection Sites are available with t-ports.

December 18, 2015

Made of tinted polycarbonate housing and latex-free silicone valve, t-port swabbable needleless injection sites are EtO and Gamma sterilization compatible. Ports are available to fit 0.079 in. OD tubing (#80172), 0.122 in. OD (#80174), or 0.157 in. OD tubing (#80171). Swabbable luer activated female luer lock allows for aspiration or injection, and t-ports are designed to be bonded in-line. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Mounting & Attaching Products

Low-PIM-Rated Products address DAS network applications.

December 17, 2015

Adapters, connectors, surge protectors, and ceiling-mount antennas, used to provide PIM (Passive Intermodulation) protection and performance to meet mobile device data rate and video streaming demands on DAS and LTE/4G bands, meet low-PIM standards with ratings of < -160 dBc or < -150 dBc. These products are specifically designed for in-building wireless systems, such as distributed antenna... Read More

Electrical Equipment & Systems, Mounting & Attaching Products, Sensors Monitors & Transducers, Test & Measuring Instruments

Industrial GCM Products have watertight design.

December 15, 2015

Along with NEMA 6P/IP67 rating, Pass & Seymour® watertight ground continuity monitoring (GCM) products offer integral indication of ground continuity and power status via dual bright blue or red LED indicator encased in transparent thermoplastic elastomer. Able to withstand effects of impacts, oils, chemicals, heat, and weather, black plugs and connectors have nickel-plated blades and... Read More

Architectural and Civil Engineering Products, Mounting & Attaching Products

Piper Plastics Selects Laird Plastics as North American Distributor for its Kyronmax(TM) PEI Plate

December 14, 2015

Chandler, AZ  USA - Piper Plastics, a leading provider of high performance polymer materials and precision machined plastic components and assemblies, is pleased to announce that Laird Plastics has been selected as the distributor for its KyronMAX™ S-6230 machinable carbon composite polyetherimide (PEI) plate in North America. "We are partnering with Laird Plastics to reach new customers for... Read More

Labels Tags Signage & Equipment, Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products, Portable Tools, Services

Garvey to Begin Flat Rate Shipping to Canada for Internet Orders

December 14, 2015

Cincinnati, Ohio - Garvey Products, Inc. is a leader in supplying handheld price marking guns, pressure sensitive labels, box cutters, safety cutters, shopping carts/baskets, and apparel tagging equipment to industrial, retail, medical businesses, and distributors. Garvey Products, Inc. is proud to announce that we are now shipping to Canada for a flat rate from our website.  We will ship... Read More

Fasteners & Hardware, Mounting & Attaching Products

VFS: "Wear" Economics Matter!

December 9, 2015

More than ever, companies are hard-pressed to find ways to save money in both manufacturing and repair settings. One such way is to use wear parts at pivot points, specifically Tension Bushings manufactured by VFS (Vogelsang Fastener Solutions). Tension Bushings are hollow cylinders with a full-length longitudinal slot ("wavy" or straight), permitting compression and expansion. They protect the... Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Mounting & Attaching Products

Integrated USB 3.1 Connector supports mobile platforms.

December 7, 2015

Featuring integrated jumper and connector assembly, FPConnected™ USB 3.1 X-Beam™ Bridge includes ultra-low profile USB3.1 Type C receptacle, high-speed Flexible Printed Circuit, and low-profile X-Beam FPC-to-Board interposer. Product is available in variety of length options and can be independently mounted, eliminating time-consuming issues associated with main PCB mounting. In addition,... Read More

Material Handling & Storage, Mounting & Attaching Products

Gravity Rollers and Mounts feature low-profile design.

December 7, 2015

With rail base measuring 32 mm to top of roller, Low Profile Placon® Series helps minimize vertical space needed for conveyors. Standard system incorporates 18 mm diameter rollers with 19 mm diameter center to center, and can be configured up to 3 m long. Available in black plastic or stainless covered versions, rollers are suitable for both standard and ESD applications. Plated steel mounts... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Automotive-Grade Connectors meet Koshiri Security requirements.

December 4, 2015

Optimized for mating integrity and protection from improper skew insertion, single-row MiniBridge™ Koshiri connectors meet Koshiri Security requirements for automotive LED/lighting applications. Scalable 1.27 mm pitch cable connector system, suited for conserving space in connections between PCBs and decentralized function units, is available with 2, 3, 4, 6, 8, 10, and 12 pins and can carry... Read More

Material Handling & Storage, Mounting & Attaching Products, Packaging Products & Equipment

Easy Spool Packaging

December 4, 2015

Spool components add speed and convenience to product packaging Greenville, Wis.  – Badger Plug has all components needed for assembling spools on site fast and easy – or as pre-assembled spools. End flanges are available in corrugate, chipboard, MDF or hardboard. Plastic or metal self-locking spool plugs, available for light to heavy-duty applications, secure end flanges to the core.... Read More