Excel Scientific Inc
Wrightwood, CA 92397
Apr 10, 2008 Able to withstand temperature from -40 to +125°C, ThermaSeal A(TM) Sealing Film incorporates thick adhesive layer for secure sealing of microplates in PCR and storage applications, such as reagent-handling. Shaped to fit within rim of raised-rim plates for sealing of all wells, polypropylene film can also be used for sealing standard microplates. Each film has 2 removable end tabs that aid in positioning film to plate.

Cotronics Corp.
Brooklyn, NY 11232
Apr 09, 2008 Resistant to electricity, chemicals, and moisture, Duralco(TM) 4463 is 100% solid system that exhibits dimensional stability and adheres to glass, ceramics, metals, and plastics. This 500°F epoxy, suited for bonding and encapsulating applications, contains no VOCs and only requires users to mix and apply.

Henkel
Rocky Hill, CT 06067
Apr 04, 2008 Formulated for use on assemblies with coarse, wide, deep, or large threads sized ¼ to 1 in., Loctite® 2033(TM) Gel Threadlocker comes packaged in 35 mL bottle that features pinpoint and wide coverage dispensing options. It cures in absence of air between close-fitting metal surfaces and prevents loosening from shock/vibration. Able to resist most chemicals, liquids, and gases, it can be disassembled using standard hand tools.

National Adhesives
Bridgewater, NJ 08807
Apr 04, 2008 VelocityP3(TM) 33-711C is solvent-free, multi-purpose adhesive that offers heat and cold resistance for wheel and bottom pot folding carton and glued lap applications. Folding carton adhesive offers adhesion on easy- to moderately difficult-to-stick substrates and eliminates slinging and throwing, avoiding inside stickers.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 03, 2008 Loctite® 331(TM) Structural Adhesive is acid-free, 2-step acrylic that fixtures in 20 sec and develops full strength in 30 min, bonding magnets and metals of all sizes. Designed for filling large gaps, Loctite® 3060(TM) Structural Adhesive is acid-free, 2-component, external-mix acrylic featuring 2 cascading adhesive streams that automatically mix together. Loctite® E-220IC(TM) Hysol® Epoxy Adhesive is acid-free, 1-component epoxy designed for induction cure operations.

Scapa North America
Windsor, CT 06095
Apr 02, 2008 Resistant to heat, chemicals, and plasticizers, Ultrafilm(TM) 6300-001 and 6500-001 are designed for sound attenuation, vibration dampening, rubber extrusion mounting, and general product assembly applications. They bond to various surfaces, including ether and ester foams, rubbers, metals, and engineered plastics, and supplied with 4 mil white HDPE liner. Acrylic adhesive used in Ultrafilm 6300-001 and 6500-001 is, respectively, 3 and 5 mils thick.

Scapa North America
Windsor, CT 06095
Apr 02, 2008 Effective on various substrates, Thermofilm® H192U and H193U are nitrile phenolic thermosetting transfer adhesives formulated for general-purpose bonding that also form protective barriers against corrosion. Bonding temperature allows products to be used on temperature-sensitive substrates and sensitive electronic devices. Once cured, offer resistance to solvents, plasticizers, and elevated temperatures. Thermofilm H192U/H193U feature 5.25 and 8 mils of adhesive, respectively.

Scapa North America
Windsor, CT 06095
Apr 02, 2008 Bioflex® Rx1073P-001 is made up of matte polyethylene film, single-coated with aggressive, biocompatible, medical-grade acrylic pressure sensitive adhesive (PSA). Suited for use as surgical tape and attaching medical devices to skin, product conforms to curved areas of body and is designed to reduce visibility of devices over which it is applied. Tape is supplied on white 60 lb kraft release liner that facilitates converting processes.

Scapa North America
Windsor, CT 06095
Apr 02, 2008 Dublfilm® S894-004 consists of polyester film, double-coated with removable acrylic adhesive on liner side and aggressive acrylic adhesive with balanced tack/peel on exposed side. Supplied with 60 lb printed polycoated release liner, permanent/removable pressure sensitive adhesive (PSA) film features removable adhesive that offers minimal residue and facilitates removal for range of mounting applications. Film can also be used for POP displays and temporary decal/nameplate mounting.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 02, 2008 Able to eliminate part racking and allow immediate quality control testing, Loctite® 5240(TM) is designed for use on medical devices that incorporate silicone materials or require flexible bond joints or coatings. It cures within 30 sec upon exposure to suitable UV/visible light source or within 24-72 hr at room temperature in shadowed areas. Adhesive meets ISO-10993 requirements and demonstrates tear strengths in excess of 75 lb/in. and elongation of 270% in cured state.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 02, 2008 Designed for use in application environments with poor ventilation, Loctite® 455(TM) Prism® Instant Adhesive has high-viscosity gel formulation that will not bloom or run or flow on vertical surfaces. This low-odor cyanoacrylate adhesive delivers consistent cure times throughout shelf life and can bond to range of materials, such as metals, plastics, and elastomers. Offered in 10 g syringes and 200 g tubes, adhesive suits high-speed assembly applications.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 01, 2008 Medium strength Loctite® 2033(TM) Gel Threadlocker is packaged in ergonomic 35 ml bottle that features pinpoint and flat-top dispense heads. Formulated for use on assemblies with threads sized ¼-1 in., it cures when confined in absence of air between close-fitting metal surfaces and prevents loosening from shock and vibration. Designed to resist most chemicals, liquids, and gases in temperatures to 150°C, it can be disassembled with hand tools.

Cotronics Corp.
Brooklyn, NY 11232
Mar 31, 2008 Offering dimensional stability, Duralco(TM) 4463 consists of 100% solid system that is mixed, applied, and cured at room temperature. Product resists electricity, chemicals, and moisture. With low odor and no VOCs, epoxy adheres to most glass, ceramics, metals, and plastics, and is suitable for bonding and encapsulated applications.

National Adhesives
Bridgewater, NJ 08807
Mar 28, 2008 Applied like paint via roller, PRONTO(TM) Construction Adhesive features solvent-free and fire-retardant formulation that also contains biocides to inhibit mold growth. Works on both metal and wood studs and capable of bonding plywood to joists, versatile adhesive can also be used to laminate gypsum boards together, laminate floor underlayment and other facing materials to existing drywall. Supplied in re-sealable pails, solution sets fast once bonded.

National Adhesives
Bridgewater, NJ 08807
Mar 28, 2008 PRONTO(TM) Joint Tape is self-adhesive tape that covers both factory and butt joints and eliminates first coat of joint compound, removing several time-consuming steps from traditional drywall finishing process. In Standard Test Method for Surface Burning Characteristics of Building Materials, perforated tape, at 614°F, exhibited flame spread index of 15, with smoke developed index of 25.

Aremco Products, Inc.
Valley Cottage, NY 10989
Mar 27, 2008 Mixed in 1:1 ratio by weight, Corr-Paint(TM) CP2050 is 2-part, 100% solids, epoxy-novolac, corrosion resistant system used to protect steel components and structures. It cures fully at room temperature in 24 hr, or can be heat cured at 175° for 4 hr. Typical film thickness is 50 mils for single coat. Providing thermal shock, salt spray, and UV resistance, product is offered in CP2050-LF (long/coarse glass fibers), CP2050-FF (fine glass fibers) and CP2050-NF (no fibers) forms.

Pres-On Products, Inc.
Addison, IL 60101
Mar 27, 2008 Double-sided with high-tack acrylic adhesive that permanently bonds to wood, aluminum, stainless steel, and PVC window frames, Pres-Bond(TM) P4500 glazing tape comes with quick polyethylene release liner. Available in 1/32, 1/16, and 1/8 in. thicknesses and lengths up to 216 ft, AAMA-approved cross-linked, closed cell polyethylene foam tape does not weather due to temperature extremes, UV, or oxidation, and blocks out water, lights, dust, and all forms of moisture.

Master Bond, Inc.
Hackensack, NJ 07601
Mar 19, 2008 One component, optically clear, non-yellowing UV15-7DC is designed for bonding, sealing, and coating applications. Cure times range from 5 sec to 2-3 min depending upon wave length, intensity of UV light, and thickness being cured. Heat curing schedules are 10-30 min at 250-260°F. System adheres to glass, metals, plastics, polyester films, and polycarbonates, and exhibits Shore D hardness of greater than 70 and elongation of 65-75%. Tensile strength is 5,460 psi.

Thermostatic Industries, Inc.
Huntington Park, CA 90255
Mar 19, 2008 With maximum use temperature of 2,800°F, Diamondback(TM) high-temperature flange seal tape is OSHA-compliant and comes in 2 or 3 in. widths on 100 ft long, 0.125 in. thick rolls. It features ceramic fiber and drop warp design suiting it for application on bolt holes up to 0.75 in. in diameter. Durable tape can be installed with optional vermiculite coating.

CS Hyde Company
Lake Villa, IL 60046
Mar 18, 2008 Available from .005-.060 in. thick, Double-Sided Teflon® Tape allows customers to fasten 2 substrates together, eliminating need for rivets, bolts, and screws. PTFE substrate provides non-porous barrier and is resistant to chemicals and extreme temperatures. Tape is sold in rolls, sheets, or custom die-cut shapes.