Master Bond, Inc.
Hackensack, NJ 07601
Aug 24, 2006 Model EP21 2-component, room temperature curing, epoxy adhesive allows adjustment of properties by altering mix ratio. Adhesive holds up to thermal cycling and resists chemicals including water, oils, fuels, acids, bases, and salts. With gap filling properties and operating temperature of -60 to 250°F, adhesive bonds to variety of substrates and does not contain any diluents or solvents.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Aug 18, 2006 Designed to meet requirements of semiconductor firms, Hysol® QMI536NB can be used on all levels of stacked die. Non-conductive, PTFE-filled paste exhibits low resin bleed and is lead-free compatible. After multiple exposures to 260°C+ reflow temperatures, Hysol QMI536NB's provides resistance to delamination and popcorning. Product is suited for variety of materials, including solder resist, bare silicon, and multiple die passivations.

Adchem Corp.
Riverhead, NY 11901
Aug 16, 2006 Suited for difficult-to-stick surfaces, 2237M exhibits dimensional stability that allows it to be used for stripping and die cutting. It is usable for bonding and laminating variety of substrates, including plastics, metals, papers, and nameplates. Supplied on 74 lb flat liner, product is comprised of ½ mil polyester film coated on each side with 1.74 mils of aggressive rubber-based, pressure-sensitive adhesive.

Scapa North America
Windsor, CT 06095
Aug 16, 2006 Used in product assembly, Thermofilm® H194U activates and cures upon exposure to 150 to 250ºF heat and pressure. Nitrile phenolic thermosetting transfer adhesive is suited for bonding, laminating, and mounting applications involving fiberglass, glass, fabric, high- and low-surface energy materials, as well as other substrates. Providing bond strength considered structural for many applications, 2.6 mil product exhibits resistance to solvents and plasticizers.

ShieldMark, Inc.
Rocky River, OH 44116
Aug 15, 2006 Requiring no drying time, MightyLine aisle striping system is made of extruded PVC with pressure sensitive adhesive backing. It comes in 7 standard colors and can be matched to any other color. Product also comes in yellow and red with various colored center lines, including luminescent MightyGlow(TM). Produced in 2, 3, 4, and 6 in. widths on 100 ft rolls, system is also available with acrylic adhesive for cold, wet environments.

ND Industries, Inc.
Clawson, MI 48017
Aug 10, 2006 Microencapsulated ND Expand-A-Seal® simultaneously locks, bonds, and seals fasteners against all air and fluid leakage. When chemical locking agent is activated, it expands volumetrically 20-50%, filling any gaps and voids within fastener threads and creating positive seal. Product can also effectively fill gaps resulting from fastener deformation during welding or oversized fastener threads. Created seal remains effective even under pressures to 115 psi without compromise.

ND Industries, Inc.
Clawson, MI 48017
Aug 10, 2006 ND Hi-Temp Patch® uses mechanical force to create secure fastening lock, resistant to vibration- and shock-related slippage, while helping to seal against gas and fluid fastening point leaks. Able to withstand high temperatures without compromise to locking or sealing capabilities, pre-applied mechanical coating creates positive lock between threads of seated fastener and its mating part - even when not fully seated. It is resistant to solvents, chemicals, water, and motor fluids.

NYLOK Corp.
Macomb, MI 48042 4007
Aug 04, 2006 Suited for weight-critical applications, NYLOK BLUE TORQ-PATCH® lets manufacturers use hex nuts of any grade with shorter bolts to make assemblies lighter while promoting locking ability and vibration resistance. Patch, permanently spray bonded onto threads of any type of nut, allows locknuts to be adjusted or reused if needed. Able to work with different torque levels in temperatures from -70 to +250°F, it can be applied with coverage of 180° or 360° to any nut down to No. 10 (M5).

Rogers Corporation
Rogers, CT 06263 0188
Aug 01, 2006 Formulated for technically demanding circuit applications, R/flex JADE Series meets flammability requirements without use of halogens. RoHS-compliant products display thermal stability and can withstand multiple passes through lead-free soldering. Transparent adhesives facilitate optical inspection and are available in bonding film, coverlay, and flexible copper clad laminate constructions. Applications include HDDs, cell phones, laptops, PDAs, and semiconductor packages.

Huntsman Advanced Materials
Los Angeles, CA 90039-1011
Jul 31, 2006 With cure time of 6 hr at 77ºF, Araldite 2041-1 and 2042-1 are suited for bonding substrates such as polycarbonate, ABS, nylon and Metton® liquid molding resin with minimal surface preparation. Adhesives are blended with 1:1 mix ratio by volume, and feature approximately 250% elongation and 2,100 psi lap shear strength on primed aluminum panels at room temperature. Colored black, adhesives are supplied in 50 ml and 200 ml dual-barrel, resealable cartridges.

Scapa North America
Windsor, CT 06095
Jul 28, 2006 Consisting of 4.5 mil polyethylene film, single-coated with UV-stable synthetic rubber adhesive, Polyflex 433 resists UV exposure and maintains watertight seal in all weather conditions. It bonds well to variety of substrates, leaves no residue upon removal, and offers chemical resistance. For building construction, product is suited for masking windows and doors during stucco or paint application. It can also be used for agricultural bagging and shrink wrapping.

Scapa North America
Windsor, CT 06095
Jul 27, 2006 Single-coated with silicone adhesive, Scapa C401 non-flammable adhesive tape insulates heavy-duty electrical equipment, protects circuitry during wave solder, and masks surfaces during high-temperature coating processes. Glass cloth backing provides dimensional stability and strength, allowing product to retain physical properties in extreme environments. While product adheres to various surfaces, it removes without leaving adhesive residue.

Scapa North America
Windsor, CT 06095
Jul 24, 2006 Supplied with 60 lb kraft release liner, Unifilm® U741 bonds materials such as plastics, Lexan®, ABS, and polypropylene. Aggressive 3 mil acrylic transfer adhesive provides consistent, lasting bond upon lamination and is suited for bonding decals and nameplates. High-tack adhesive, resistant to water and ambient humidity, can also be used for general-purpose product assembly and for laminating to foam for gasketing and NVH applications.

Alfa International Corp.
Woonsocket, RI 02895
Jul 24, 2006 Silver-filled ALFA E10-101 develops electrically conductive bonds and coatings between different and dissimilar materials such as metals, ceramics, glass, and plastic laminates. Smooth paste of refined silver and epoxy, free of solvents and copper or carbon additives, can be used as cold-solder for heat-sensitive components where hot soldering is impractical. It comes in 2-chamber plastic pouches and burst packs, pre-measured jars from 10-500 g, and syringes.

Adchem Corp.
Riverhead, NY 11901
Jul 21, 2006 Available in 44 and 60 in. roll widths, double-coated 3175M is suited for automotive, electronics, construction, graphic arts, medical, and general industrial applications. Rubber-based adhesive on exposed side bonds polyurethane and polyethylene foams, felt, rubber, sponge, cork, abrasive, and gasket materials. Liner side consists of rubber-based adhesive that bonds to most substrates at room temperature.

Devcon
Danvers, MA 01923
Jul 20, 2006 Suitable for securing honeycombed floor and ceiling panels in commercial airplanes, flame-retardant 10 Minute(TM) Epoxy FR passes federal 60 sec vertical burn test (14 CFR 25.853/25.885). Mixed as dispensed, epoxy features 80,000 cps viscosity, 10 min working time, 20 min fixture time, and functional cure time of 3 hr at 72°F. Epoxy features 25 pli peel strength, 10 ft-lb/in.² impact resistance, dielectric strength of 800 V/mil, and adhesive tensile lap shear strength to 2,900 psi.

Dow Corning Corp.
Midland, MI 48686 0994
Jul 19, 2006 Utilizing hot melt technology, HM-2510 combines crosslinked silicone sealant with instant green strength of pressure sensitive adhesive, meaning that parts can be moved immediately from one processing step to another. It offers aggressive adhesion to PVC, aluminum, painted and treated wood, paints, and plastics. Optimized for use with automated dispensing equipment, non-hazardous, low-odor product has open time of 15 min and pot life up to 24 hr.

Pres-On Products, Inc.
Addison, IL 60101
Jul 19, 2006 Klean-Stick(TM) Separator Pads feature removable pressure-sensitive adhesive that is dry to touch, resistant to 300°F, and can be removed without leaving residue. Adhering to glass, mirrors, and metal during transporting, packing, storage, and installation, pads set between glass pieces adsorb vibration, maintain position, and prevent breakage. Pads are supplied on kiss cut rolls or pads for application in either felt, cork and foam materials 1/32-1/2 in. thick.

Cotronics Corp.
Brooklyn, NY 11232
Jul 12, 2006 Bond-It 007 adheres to smooth, rough or porous surfaces. Curing in minutes at room temperature without odor, adhesive features consistency thick enough to hold parts together while drying without molds, fixtures, or clamps. There is no sagging or dripping following application. Adhesive is packaged in self mixing dispensing cartridges and attaches ceramics to metals, brake pads to metals, and seals ends of heating elements, thermocouples, tubes, and sensors.

Scapa North America
Windsor, CT 06095
Jul 07, 2006 Targeted for printing and converting applications, Scapa 536 is polyester film single coated with an acrylic adhesive formulated to deliver strong splice to non-silicone surfaces and eliminate edge bleeding. Polyester film backing prevents loose fibers from separating during slitting and unwinding, and silicone release coating allows wide rolls of Scapa 536 to unwind smoothly and easily.