Power Adhesives Ltd
Basildon, Essex   United Kingdom
Nov 27, 2007 KNOT-TEC(TM) System lets manufacturers of such products as windows, doors, and furniture use entire board, rather than just portions before or knot or defect. Combining TEC(TM) 250 hot melt adhesive applicator and TECBOND(TM) 7718/12 polyamide hot melt glue sticks, system repairs knots and fills wooden surfaces so that they are smooth and unnoticeable prior to painting/finishing. Solution performs repairs in seconds, and any surplus glue can be removed with chisel or cutting tool.

Epoxies Etc.
Cranston, RI 02921-3407
Nov 21, 2007 Formulated with high purity polymers and ultraviolet protectors, Type 20-3302 epoxy system is formulated to minimize yellowing when cured. Curable at room temperature, it features water clear clarity, bubble free castings, and low viscosity for quick self leveling. Available in 2 different viscosities, it is suited for LED potting, fiber optics, and other clear adhesive or encapsulating applications.

Frank Lowe Rubber & Gasket Co., Inc.
Farmingdale, NY 11735
Nov 20, 2007 Series GLZ 3500 Cross Linked Polyethylene Glazing Tape is available in 1/16 and 1/8 in. thicknesses and Series GLZ 5500 is 1/32 in. thick. AAMA-approved tape bonds with wood, aluminum, SS, and PVC window frames. Supplied with non-tear blue film liner, it is designed to block water, moisture, light, and dust and is resistant to UV, weathering, oxidation, and temperature variation.

3M Co., Electronic Products Div.
Austin, TX 78726
Nov 14, 2007 Available in 1 in. x 30 ft rolls, Scotch Silicone Rubber Electrical Tape 70 HDT is Class H material and is suitable for 180°C continuous operation. Tape has peak thickness of 20 mil and edge thickness of 8 mil, and features blue center guide line. Made of self-fusing, inorganic silicone rubber, it may be used on terminations operated outdoors or indoors and in areas subject to increased levels of contamination or moisture.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 08, 2007 Formulated to cure quickly at ambient temperatures, Supreme65HT-6 produces bonds with tensile lap shear strengths in excess of 3,000 psi for service in temperature range of below -80°F to +400°F. It is resistant to vibration, stress fatigue cracking, moisture, creep, and corrosion. Available in pre-measured bubble packs, cartridges, ½ pint, pint, quart, gallon, and 5 gal containers, unit offers adhesion to metal, glass, ceramics, wood, vulcanized rubbers, and plastics.

Pres-On Products, Inc.
Addison, IL 60101
Nov 06, 2007 Medium-density P9100 and soft-density P9200 closed cell EPDM tapes meet needs of maintenance and construction crews for weather stripping, dust-proofing, sound dampening, and thermal insulation. Tapes are single-coated with professional-grade acrylic adhesive that has removable liner. Featuring temperature range of -65 to +200°F, they can be ordered in standard thicknesses of 1/6 to ½ in. and in lengths up to 100 ft.

Solvay Engineered Polymers
Auburn Hills, MI 48326
Nov 06, 2007 Used to bond acrylic layer onto substrate of thermoplastic polyolefin (TPO) for use in thermoforming applications, ADDHERE(TM) tie layer promotes gloss, depth of image, and surface durability. Pelletized material can be co-extruded with TPO substrate, to which acrylic film rollstock can be laminated in-line, or sheet producers can tri-extrude each of 3 materials (acrylic, tie layer, and TPO) from melt phase to produce multi-layer sheet. Product is colorable and recyclable.

Prairie Technology Group, Inc.
Hutto, TX 78634
Nov 02, 2007 Formulated to produce long-lasting repairs to fiberglass molds, RAPID PATCH repair paste can be feathered out after curing for less than 20 minutes at 75ºF. It chemically bonds to damaged mold sections, and offers sag resistance even when applied to vertical surfaces. Based on methylmethacrylate (MMA) chemistry, fast-curing paste can also be used for filling plastic, steel, and aluminum substrates that require patching.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Nov 01, 2007 Able to withstand hot shear tests at 150°F for more than 50 hr, ROBOND(TM) Prohesion water-based, pressure sensitive acrylic adhesive is suited for door panels, interior pillars, instrument panels, and ductwork. Humidity resistant product retains more than 80% of its peel after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Bonding agent exhibits anchorage to substrates with both high and low surface energy.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 30, 2007 With elongation of greater than 60%, Type EP21TDCSFL is 100% reactive epoxy adhesive that has has 1:1 mix ratio by weight/volume, does not contain diluents/solvents, cures at room temperature, and offers mechanical shock resistance and low outgassing properties. Features include volume resistivity of less than 10^-3 W cm, tensile shear strength of greater than 1,500 psi, T-peel of greater than 30 pli, and thermal conductivity of 11 BTU/in./ft²/hr/°F.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Oct 22, 2007 MEGUM(TM) 3110, 4100, and 5382 are suited for manufacture of specialized transportation and industrial products requiring minimized lead and heavy metals contamination. While MEGUM 3110 is offered as pre-diluted primer, MEGUM 4100 comes as cover-one, brominated polymer, solvent-based adhesive with anti-mold fouling properties. MEGUM 5382 cover-two, solvent-based adhesive is formulated without reportable levels of lead/heavy metals, chlorinated solvents, or ozone-depleting chemicals.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Oct 19, 2007 Designed for pressure-sensitive tapes and other applications traditionally served by solvent-based adhesives, water-based ROBOND(TM) Prohesion withstands hot shear tests at 150°F for more than 50 hr and retains more than 80% of its peel adhesion after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Product adheres aggressively and exhibits optimal anchorage to substrates ranging from high surface energy to low surface energy.

Five Star Technologies Ltd.
Cleveland, OH 44142
Oct 16, 2007 Targeted at display bus bar electrodes, ElectroSperse D-110, D-112, and D-114 are screen-printable pastes that deliver adhesion when fired onto indium tin oxide or fluorine-doped tin oxide-coated glass. Type D-114 achieves sheet resistivity of 1.2-1.8 mW/sq, while D-112 and D-114 achieve 2-3 and 4-5 mW/sq, respectively. Lead-free products are RoHS and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) compliant.

Carlton Industries
La Grange, TX 78945
Oct 11, 2007 Featuring rubber-based adhesive, Mighty Tape can be lifted and repositioned without losing stickiness. White and yellow tapes come in 2, 4, and 6 in. widths, while white/black hatch and yellow/black hatch tapes come in 3 and 4 in. widths. Mighty Tape is suited for warehouse environments and other high-traffic areas that need to be reconfigured according to needs of business.

CS Hyde Company
Lake Villa, IL 60046
Oct 08, 2007 Kapton® Pressure Sensitive Adhesive (PSA) Tapes are available with liner that protects tape's adhesive while not in use and facilitates application and visual inspection after use. Tapes types offered with peel-off liner include Single-Sided with Silicone Adhesive in film thickness of .001, .002, and .005 in.; Single-Sided with Acrylic Adhesive in .001 in. film thickness; and Double-Sided Polyimide with Silicone Adhesive in .001 in. film thickness.

SEI Chemical
Northridge, CA 91324
Oct 05, 2007 Type SCS-002-SP Sealer Prime incorporates active silanol group and nanoparticulate that provides chemical interaction and bonding to ensures topcoat adhesion. It also maintains color integrity during erecting new or rehabbing older structures. Available in 5, 55, and 275 gal containers, sealer produces waterproof, UV resistant, and highly adhesive clear priming treatment in 1 or 2 coats, depending upon porosity of material.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 01, 2007 Supplied as powder and mixed with water to paste-like consistency, Ceramacast(TM) 586 can be used with pneumatic dispensing equipment for bonding and potting high-temperature electrical components in applications to 2,800°F. Zirconium-silicate based, phosphate-bonded, chemically setting compound exhibits dielectric strength of 220 V/mil and volume resistivity of 1,011 ohm-cm. Compressive strength is 8,000 psi, and coefficient of thermal expansion is 2.7 ppm/°F.

Aremco Products, Inc.
Valley Cottage, NY 10989
Sep 25, 2007 Suited for bonding ceramics, metals, and semiconductor materials in applications up to 3,000°F, Ceramabond(TM) 865 provides thermal conductivity of 60-80 W/m°K and dielectric strength of 500 V/mil. Single part, silicate-bonded ceramic adhesive is filled with less than 10 microns aluminum nitride particles, contains no volatile organic compounds, and cleans up with warm water and soap in uncured state. Curing is achieved by heating at 200°F for 2-4 hr.

ITW Devcon Environmental Products
Danvers, MA 01923
Sep 10, 2007 Able to withstand service temperatures from -­65 to 300°F, Permatex® GEL SQUEEZE(TM) Threadlockers prevent fastener loosening and failure caused by vibration and shock. All-purpose Permatex Medium Strength BLUE GEL SQUEEZE is suited for threaded assemblies ¼-1 in. dia and exhibits 115/53 lb-in. of break/prevail torque, while Permatex High Strength RED GEL SQUEEZE is suited for threaded assemblies 3/8-1 in. or more in dia, and exhibits break/prevail torque of 175/230 lb-in.

Master Bond, Inc.
Hackensack, NJ 07601
Sep 07, 2007 Suitable for high performance casting, potting, and encapsulation, MasterSil 151 two component compound is designed to cure at room temperature and is resistant to vibration, impact, shock, and thermal cycling. Features include service operating temperature range of -65°F to +400°F, elongation at break of 160%, 460 V/mil dielectric strength, volume resistivity of 1 x 1,015 W cm, and 10:1 mix ratio by weight. Low viscosity assures complete fill-in around complicated contours.