Henkel Loctite Corporation
Rocky Hill, CT 06067
May 04, 2005 Electrically conductive Loctite® QMI529HT addresses requirements of higher-temperature processes such as lead-free manufacturing. Suited for attachment of ICs and components to metallic lead frames, silver-filled adhesive offers hydrophobic properties and temperature stability for production of void-free bond lines. Bismaleimide formulation can be SkipCured(TM) on diebonder or wirebonder preheater and can be converted into controlled collapse spacer paste.

Ticona Engineering Polymers
Florence, KY 41042
Apr 29, 2005 Topas COC (cyclic olefin copolymer) enables blown film producers to make transparent films free of gels. Topas 8007F-400 clear cyclo-olefin copolymer adheres to polyolefins, can be metallized and colored, and has inherent moisture barrier. It also features 2,500 MPa modulus and 80°C glass transition temperature. Product may be used in multilayer as discrete or COC-rich layers, or in blown films for applications such as pouches, flow-pack, lidding, and twist wrap.

3M Adhesives & Tapes Div.
St. Paul, MN 55144 1000
Apr 27, 2005 Usable for applications involving expanded or extruded polystyrene, Polystyrene Foam Insulation 78 Spray Adhesive dries in 5 min when applied to single surface and in 15 min when applied to both surfaces. Resisting temperatures up to 140ºF, product contains no methylene chloride, CFCs, or 1,1,1-trichlorethane. Adhesive is available in no-clog pressurized cylinder, 24 oz aerosol can, and 5 and 55 gal bulk containers.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 22, 2005 Single-part, high-temperature Pyro-Puttyâ„¢ 1500 is used as sealant and gasketing compound in primary metal, foundry, and smelting industries for service conditions to 2,300°F. Non-toxic product will not shrink or crack on hot molds, and will not affect metallurgy of molten metals. It can be applied to tools before assembly, spot applied to bad joints after assembly, or used to seal vertical mold cracks. Product density is 11 lb/gal.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 22, 2005 Color-coded for identification, Threadlockers come in medium and high strength formulas, as well as penetrating version. Products positively lock and seal threaded fasteners against vibration loosening and protect threads against corrosion, eliminating need for lock nuts and washers. Specified by automotive OEMs for use on assembly lines, adhesives are suited for applications ranging from delicate fuel injection components to heavy-duty transmission and engine assemblies.

Tra-Con, Inc.
Bedford, MA 01730
Apr 21, 2005 Clear, low-viscosity TRA-BOND F230 offers Shore D hardness of 85, pot life of 1 hour, and can be cured in as little as 1 min at 150°C. Product is suited for termination of single and multi-mode connectors, and bonds to variety of optical materials. Featuring operating temperature of -60 to 175°C, adhesive offers impact and thermal shock resistance. Unmixed components are light yellow, while mixture is light green, and fully cured adhesive is reddish-amber.

Master Bond, Inc.
Hackensack, NJ 07601
Apr 14, 2005 Suited for bonding, coating, sealing, and casting, EP30LV bonds to similar and dissimilar substrates. Once hardened, product provides electrical insulation with service operating temperature of -60 to +250°F. Formulation is 100% reactive and does not contain solvents or other volatiles. Bonds are rigid and resistant to water, oil, and most organic solvents. Epoxy offers tensile strength of greater than 9,500 psi and dielectric strength of 440 V/mil.

Scapa North America
Windsor, CT 06095
Apr 14, 2005 Bioflex® Rx869S consists of 25 mil white spunlaced polyester fabric double coated on each side with pressure sensitive acrylic adhesive. Lightweight tape provides conformability to curved areas of the body, delivers good adhesion to skin, yet removes cleanly without causing trauma. Supplied on easy release 80 lb white kraft paper liner, tape is suited for applications such as bandages, EKG electrodes, and TENS.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 06, 2005 Loctite® QuickTite® Super Glue incorporates clog-free, squeeze grip applicator that provides pinpoint control of amount and placement of adhesive. Available in no-run liquid and gel formulations, instant adhesive works with materials such as rubber, metal, plastic, glass, and vinyl. Offered in 0.14 oz bottles, it can be used on vertical and nonporous surfaces and is also effective on oily, dirty, and acidic surfaces.

Scapa North America
Windsor, CT 06095
Mar 31, 2005 Dublfilm S995 polyester film is double-coated on liner side with acrylic adhesive and on exposed side with high-tack, high-peel, rubber-based adhesive. Pressure-sensitive adhesive product offers resistance to environmental extremes, adheres to ether and ester foams, and bonds to low-surface energy plastics. Adhesive coat weight facilitates bonding to irregular surfaces. Product can be used to bond abrasive disks and attach decorative materials.

Cotronics Corp.
Brooklyn, NY 11232
Mar 30, 2005 Resbond 940 series of 3,000°F ceramic adhesives is available in various grades of thermal expansion, as machinable, metallic-based, and electrically or thermally conductive. Able to adhere to quartz, cordierite, fused silica, glassware, ceramics, and metals, product cures in 4-8 hr at room temperature or in 5 min at 175°F. Adhesives, offering chemical and thermal shock resistance, suit bonding, sealing, and insulating applications.

Scapa North America
Windsor, CT 06095
Mar 29, 2005 Scapa 425 provides users with waterproof, matte finished, cloth gaffers tape for non-reflective applications. Single-coated with natural rubber adhesive that removes cleanly from most surfaces, black polyethylene tape securely holds audio visual (AV) and electrical cords and wiring at concerts, trade shows, conventions, and hotels.

Aremco Products, Inc.
Valley Cottage, NY 10989
Mar 24, 2005 Pyro-Puttyâ„¢ 677 single-part, water-dispersed, alumina-silica based adhesive and coating system is suited for electrical insulation and bonding applications to 2,400°F. Thixotropic product is supplied in paste consistency with viscosity of 43,000 cps and specific gravity of 2.17 g/cc. After application, it dries at room temperature in 1-4 hr and cures in 2 hr at 200°F. Material produces hard shell that protects induction coils from high temperature oxidation.

Devcon
Danvers, MA 01923
Mar 24, 2005 Flex Welder FC permanently assembles products subject to flexing, shock, vibration, or variations in temperature up to 250°F. Flexible methacrylate material provides 100% tensile elongation. Mixed as dispensed in 1:1 ratio, creamy thixotropic gel spreads and fills gaps up to 3/8 in. but will not run, drip, or sag on vertical or inverted surfaces. Working time is 3 min and fixture time is 9 min. Adhesive attains functional cure in 1 hr and full cure in 24 hr.

TruSeal Technologies Inc.
Beachwood, OH 44122
Mar 17, 2005 Usable in single- or dual-seal constructions, DecoSeal offers all-in-one sealant and spacer system for decorative glass used in windows and doors. Warm edge spacer system wraps around perimeter of decorative panel and is then placed between 2 additional lites for efficient insulated glass unit. Benefits include low moisture vapor transmission rate, concentrated desiccant layer, and low profile that accommodates secondary sealing or structural reinforcement in large lites.

Dever Enterprises LLC
Willoughby, OH 44096
Mar 17, 2005 Water-based All-Shield® Concrete & Masonry Sealer stops water penetration and damage in concrete, masonry, brick, block, stone, tile, stucco, and adobe. Clear, non-yellowing, VOC compliant formula allows substrate to breathe and water vapor to escape, providing protection for up to 8 years. Mold and fungus resistant, it also protects against freeze/thaw cycles, efflorescence, and alkali. Sealer is available in 1- or 5-gal container.

Master Bond, Inc.
Hackensack, NJ 07601
Mar 16, 2005 Optically clear, UV-curable UV15X-6 polymer system adheres to various substrates, including plastics and elastomers. Suited for medical device assemblies, single-component urethane formulation is 100% reactive, does not contain any volatiles, and also acts as electrical insulator. Cure is not affected by air or moisture, and cured material exhibits abrasion resistance. Bonds resist exposure to water and other solvents.

Aremco Products, Inc.
Valley Cottage, NY 10989
Mar 11, 2005 Ceramabondâ„¢ 668 adhesive is single part, alumina-filled compound. Physical properties include torque strength of 10.6 ft-lb, dielectric strength of 245 V per mil at room temperature, and coefficient of thermal expansion of 4.0 ppm/°F. Compound can be applied with brush, syringe, or pneumatic dispenser. After application, it dries at room temperature and cures in 2–4 hr at 200°F. It resists most acids, solvents, and fuels.

Dow Corning Corp.
Midland, MI 48686 0994
Mar 02, 2005 Optical Coupling Gel, OE-4000 consists of 2-part, high-purity, transparent silicone gel used for refractive index matching for silica-to-fiber and other optical junctions. One-part transparent silicone elastomer, OE-4100 provides refractive index shifting potential for planar silica-on-silicon optical components. Two-part Photonic-Grade Encapsulant OE-4200 consists of soft silicone elastomer for protecting semiconductor lasers, photonic, and electronic components.

Devcon
Danvers, MA 01923
Feb 16, 2005 When mixed, 2-part Dev-Thane 5 becomes thixotropic paste with fixture time of 15 min and functional cure of 3 hr. Once cured, it has tensile strength of 2,100 psi and tear resistance of 400 pli. Adhesive produces no VOC emissions and withstands service temperatures up to 180°F dry and 120°F wet. Dev-Thane 5 is suited for primerless bonding of rubber or metal to glass, concrete, or wood, as well as bonding EPS to foam, foam to ABS, and aluminum to aluminum.