Scapa North America
Windsor, CT 06095
Dec 15, 2005 Acrylic transfer adhesives Unifilm® U617A and U618A, suited for automotive assembly applications such as general assembly and foam lamination, adhere to ether and ester foams as well as surfaces such as low surface energy plastics. Unifilm U617A, available in 3 mil thickness, exhibits resistance to chemicals, environmental extremes, and aging. Available in 4 mil thickness, Unifilm U618A exhibits humidity- and water-resistance.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Dec 09, 2005 Hysol® FP4451TD(TM) and FP4800(TM) meet stringent JEDEC level testing requirements and enable wirebonded cavity-down SuperBGA® and Viper(TM) BGA packages. Suited for package level applications, Hysol FP4451TD offers aspect ratio of 0.70 height-to-width and enables dam heights greater than 1 mm. Self-leveling, liquid encapsulant, Hysol FP4800 withstands solder temperatures to 260°C after preconditioning, and penetrates fine-pitch wires and deep cavities without entrapping voids.

Aremco Products, Inc.
Valley Cottage, NY 10989
Dec 08, 2005 Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty(TM) 950 is used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds up to 950°F. Product is resistant to chemical and steam attack, high pressure and vacuum atmospheres, and mechanical vibration and joint movement. Offered in 11 oz caulk gun cartridge, sealant cures in service, or before service by heating joint without pressure.

Devcon
Danvers, MA 01923
Dec 05, 2005 Flex Welder FC methacrylate adhesive aids in assembly of products subject to flexing, shock, vibration, or variations in temperature up to 250°F. This 100% solids gel fills gaps up to 3/8 in. and will not run, drip, or sag. For service temperatures to 180°F, Dev-Thane 5 urethane adhesive also forms flexible bonds. Primerless, 2-part adhesive has 100% solids formulation and produces no VOC emissions. Both products minimize distortion of thin panels in assembly applications.

Sika Limited
Welwyn Garden City, Herts AL7 1BQ  United Kingdom
Dec 01, 2005 Offering alternative to mechanical fastening systems, SikaLock product line comprises fast-acting, moisture-curing cyanoacrylates, anaerobic adhesives, and UV-curing adhesives designed to speed up mass production processes across range of manufacturing industries. From rubber, plastic, and polypropylene materials to delicate electronic assemblies, glass, and jewelery, SikaLock meets all types of bonding requirements.

Victrex plc / Victrex USA Inc.
Greenville, SC 29615
Dec 01, 2005 Chemically resistant, electrically insulating VICTREX® PEEK tape withstands continuous operating temperatures up to 428°F as well as higher temperatures for short durations. It resists wear over various ranges of pressure, velocity, temperature, and counterfacial roughness. Hydrolytically stable product can withstand over 109 rads of radiation exposure without embrittlement and comes coated on one or both sides with silicone or acrylic adhesive systems.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 29, 2005 Used for bonding and sealing, UV15X-5 single-component urethane elastomer withstands thermal cycling and mechanical shock. Its formulation exhibits abrasion resistance and forms chemical-resistant bonds between similar and dissimilar substrates. This 100% reactive product, which does not contain any solvents or volatiles, cures in thicknesses greater than 1/8 in. at room temperature upon exposure to UV light. Tensile strength is 1,800 psi, and Shore D hardness is 35-40.

Aremco Products, Inc.
Valley Cottage, NY 10989
Nov 29, 2005 Able to bond to ceramic, metal, and quartz substrates, Ceramabond(TM) 569 single-part, ceramic-filled paste cures by being heating at 200°F for 2 hr or drying at room temperature for 24 hr. It exhibits dielectric strength of 200 V/mil, volume resistivity of 109 ohm-cm, CTE of 4.2 in/in/°F, and torque strength of 6.0 lb-ft. Applied via brush, syringe, or automatic dispensing equipment, product offers moisture and thermal shock resistance.

Scapa North America
Windsor, CT 06095
Nov 23, 2005 Formulated for high-temperature gasketing/sealing and general-purpose bonding, Unifilm U725 acrylic transfer adhesive suits thermal management applications. Product adheres to surfaces such as urethane foams, metals, and engineered plastics. Able to withstand environmental extremes and temperatures over 250ºF, adhesive is supplied with clear, polyester film liner that removes in one piece and is formulated to withstand spooling without cracking.

GE Advanced Materials
Wilton, CT 06897
Nov 22, 2005 Suited for automated industrial assembly, room-temperature-cure adhesive system is comprised of RTV210A component and either RTV213B for tack-free cure under 30 min and black color, RTV210B for cure under 30 min and gray color, or RTV223B for cure under 9 min and dark gray color. System adheres to substrates such as plastics, steel, aluminum, fiberglass, and Formica. Lap shear testing with these substrates resulted in 100% cohesive failure with average over 80 psi force.

GE Advanced Materials
Wilton, CT 06897
Nov 11, 2005 Offering high refractive indexes from 1.4 to over 1.5, InvisiSil Encapsulants offer adhesion to range of case and electrode materials including ceramics, polyamides, and silver and gold electrodes. They provide stability under thermal stress and UV light, resisting yellowing and delamination from substrate. InvisiSil Lens Materials are high hardness silicone materials that can be liquid injection molded and also provide resistance to heat and UV light.

Tra-Con, Inc.
Bedford, MA 01730
Nov 09, 2005 Suited for electronic bonding, coating, and sealing applications that require flexibility, silver, 2-part Tra-Duct 926K01 offers working time that enables it to be used for high-speed component attachment. It creates electrically and thermally conducting bonds and coatings between materials such as metals, ceramics, glass, and plastic insulates. Suited for auto-dispense, product has medium viscosity and can be cured in 1 hr at 100°C.

Tra-Con, Inc.
Bedford, MA 01730
Nov 09, 2005 With 90 Shore D hardness and 60 min working life, TRA-CAST 3145 is thermally conductive and electrically insulating. Black, medium-viscosity casting system can be cured in 24 hr at ambient temperatures or more quickly at elevated temperatures. NASA outgassing-approved, product has 100% reactive solids content and coefficient of expansion that allows it to bond to various materials. It is useful for staking heat-sensitive components in PCB applications and as potting compound.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 08, 2005 Resistant to vibration, impact, shock, and thermal cycling, 2-component EP21TDCHT bonds dissimilar substrates, including metals, glass, ceramics, rubbers, and plastics, with different coefficients of expansion. It cures at room temperatures and has service operating temperature range of -100 to +350°F. With 70 shore D hardness and tensile strength over 3,500 psi, bonds resist water, oils, and organic solvents. Product exhibits tensile modulus of 175,000 psi.

Scapa North America
Windsor, CT 06095
Nov 08, 2005 Available at full and slit widths, cross hatch patterned, medical-grade Bioflex Rx734U features 0.5 mil aggressive, acrylic adhesive that bonds to various substrates. For direct skin medical applications, product is applied to medical nonwovens and promotes breathability, fluid transmission, and moisture vapor transmission. It is supplied with 76 lb polycoated release liner.

Novacel
DEVILLE LES ROUEN 76250  France
Nov 03, 2005 Measuring 40 microns thick, Novacel 9390 uses adhesive without solvent and can be printed with trademark, advertising message, or technical information. Level of luster and transparency highlights appearance of protected surface by preventing installation defects, including microbubbles. Offered in rolls of 3,000 or 10,000 ft, product is suited for sheet metal co-laminated with PET film or PVC foil and can also protect thermoformed glossy PVC foil.

Tra-Con, Inc.
Bedford, MA 01730
Nov 03, 2005 Two-part, medium-viscosity TRA-BOND 2112 offers room temperature or heat cure, and once cured, provides resistance to weather, galvanic action, petroleum products, alcohol, salts, and other organic and inorganic compounds. Solvent-free thixotropic adhesive features glass transition temperature of 93°C, and hardens to enamel-like coating with chemical resistance. Product is suited for electronic, aerospace, and industrial bonding, laminating, and reinforcing applications.

Tra-Con, Inc.
Bedford, MA 01730
Nov 03, 2005 Two-part, thixotropic TRA-BOND 2151 is heat conductive, electrically insulating, and can be room temperature or heat cured. Coefficient of thermal expansion allows bonds to surfaces including metals, silica, alumina, ceramics, glass, and plastics. Product is suited for staking transistors, diodes, resistors, integrated circuits, and other heat-sensitive applications.

Brooks, E. J., Co.
Livingston, NJ 07039
Nov 01, 2005 Self-Adhesive Labels and Tapes adhere to openings and closures and can be inspected for audit trail, helping to safeguard integrity in any supply chain requirement. Type KR tape leaves remnant of security message on surface, while Type KNR tape indicates tampering by its absence or tamper message. Type KTL labels and tape are self-voiding and delaminate on package's surface. Type MRS2 tape stretches when applied to dynamic closure.

National Starch & Chemical Co.
Bridgewater, NJ 08807-0500
Oct 28, 2005 Developed for case and carton sealing applications, EASY-PAC(TM) 200°F packaging hot melt produces fiber-tearing bonds and maintains package security in temperature extremes. Clean-running packaging adhesive eliminates chance of char production, minimizing adhesive application malfunctions due to clogged filters, hoses, and nozzles. In case of operator contact, operating temperature lessens degree of worker injury compared to 350°F adhesives.