Permabond
Somerset, NJ 08873
May 15, 2007 Suited for bonding applications that involve impact, peel, and flexing stresses, Permabond 731 and Permabond 735 single component, instant cyanoacrylate adhesives can adhere rapidly to variety of surfaces including aluminum, steel, plastics, and rubbers. Permabond 735 is opaque black in appearance, while Permabond 731 is crystal clear.

Aremco Products, Inc.
Valley Cottage, NY 10989
May 15, 2007 High temperature, alumina-filled, water-based Ceramabond(TM) 835M ceramic adhesive features operating temperature resistance of 3,000°F, dielectric strength of 200 V/mil, and tensile-shear strength of 500-600 psi after exposure to 1,000°F. Full curing is accomplished by step curing in tunnel furnace for 30 min each at 100°C and 200°C, respectively. Shrinkage upon curing is less than 1%, and inert material exhibits no outgassing upon curing.

DriTac Adhesive Group
Brooklyn, NY 11237
May 11, 2007 DriTac 9200 FasTac Polymeric Resin with Urethane, high solids wood flooring adhesive inhibits growth of bacteria and mold, and has zero VOCs. Requiring no flash time, wet-lay, solvent-free, non-flammable adhesive is available in containers from 1-4 gal and is suited for installing multi-ply engineered plank, plain-back parquet, ¾ in. solid shorts, as well as acrylic impregnated multi-ply engineered plank and plain-back parquet installations.

DeWAL Industries, Inc.
Saunderstown, RI 02874
May 09, 2007 Offered in widths from 0.500-12.00 in., DW 602BT tapes consist of PTFE compounded with direct coat acrylic or silicone pressure-sensitive adhesive. Chemically inert, stable, abrasion-resistant, and non-toxic products feature smooth, self-lubricating surfaces and peel-off release liners. Engineered to reduce friction and appropriate for linear slide bearing applications, tapes exhibit wear resistance and smooth surfaces in wet or dry applications.

Gluefast Co., Inc.
Neptune, NJ 07753
May 09, 2007 High in solids and offering lay flat qualities, acid-free GF 878U can be used to mount items onto foamcore, chipboard, matboard, and corrugated surfaces, as well as wood. Product is suited for use in roll coaters and is available in quarts, gallons, 5-gal pails, and 55-gal drums.

Epoxies Etc.
Cranston, RI 02921-3407
May 01, 2007 Impact resistant epoxy adhesive Type 10-3216 bonds to metals, woods, plastics, rubbers, and masonry products. Featuring 1:1 mix ratio, it will not crack, and is available in low viscosity translucent version as well as high viscosity gray version. Structural adhesive can be used in cryogenic bonding and is suitable for many aircraft and aerospace applications.

Akron Coating & Adhesives, Inc.
Akron, OH 44301
Apr 27, 2007 Offering peel values up to 32 lb-in., ACA 161A is designed to bond polypropylene and other engineering plastics to metals such as aluminum. It can be applied directly to materials surface, eliminating assembly time required for primers. Adhesive may be applied to metal foil by gravure printing, reverse roll, or wire wound bar coating methods. If necessary, it can also be applied with brush, paint roller, or by spray coating.

ShieldMark, Inc.
Rocky River, OH 44116
Apr 23, 2007 MightyLine(TM) floor tapes draw attention to areas where extra caution is required. While black diagonally lined versions are available in 2, 3, 4, and 6 in. widths, red diagonally lined versions come in 2, 3, and 4 in. widths. Either color is resistant to wear and can be cleaned with industrial scrubbers. Peel-and-stick floor tapes employ aggressive adhesives that leave minimal residue upon removal.

Master Bond, Inc.
Hackensack, NJ 07601
Apr 11, 2007 Providing resistance to water and chemicals, 2-component EP37LV-1 Polymer System features tensile strength in excess of 8,300 psi, working life of 30 min at room temperature, and final mix viscosity of 5,000 cps. Full cures are obtained in 8-10 hr, while complete cures take longer at lower temperatures. Applications range from grouting, troweling and concrete patching in damp locations to marine coatings, floor toppings, and solder substitutes for copper pipe joints.

Compac Corp.
Hackettstown, NJ 07840
Apr 03, 2007 Utilized for foam and gasket fabricating, NetBond(TM)30 acrylic adhesive tape is water-resistant and functions as general-purpose laminating tape. Moisture stable liner and synthetic fiber netting enable tape to adhere to diverse materials and surfaces such as ether, ester, polyethylene, neoprene, and vinyl nitrile foams. Able to adapt and form to curved surfaces, tape is suited for automotive, appliance, and industrial applications.

Aremco Products, Inc.
Valley Cottage, NY 10989
Mar 26, 2007 Consisting of inorganic, ceramic and metal-filled paste, Pyro-Putty® 653 bonds tenaciously to cast iron, steel, and stainless steel. Thixotropic formula can be applied to horizontal and vertical surfaces in cross sections up to ½ in. thick. It is chemically inert and will not decompose at ultra high temperatures. Resistant to most fuels, solvents, and other corrosives, compound is suited for sealing cast steel castings, housings, pipes, and flanges.

Adchem Corp.
Riverhead, NY 11901
Mar 21, 2007 HF series hybrid glazing tape provides high-strength, UV-resistant acrylic adhesive bond to glass and rubber-based adhesive bond to vinyl lineal coated on cross-linked closed cell polyolefin foam. Foam has 338% modulus of elasticity and less than .4% water absorption, creating impermeable moisture barrier. Also offered with blue polyethylene release liner, AAMA-approved tape is available in 1/16th white and black in 72 yd long rolls to 60 in. wide.

3M Adhesives & Tapes Div.
St. Paul, MN 55144 1000
Mar 15, 2007 Available in pressurized cylinders, Scotch-Weld(TM) Adhesives come in choice of formulations to meet variety of regulatory requirements, including post-formable, non-flammable, no HAPS, low VOCs, no ozone depleting chemicals, and SCAQMD. Pressurized application ensures optimal use of adhesive contents with little product waste. Offering spray widths from 1-12 in., adjustable-tip spray gun provides multiple spray patterns with choice of drying speed and bonding strength.

Birchwood Casey
Eden Prairie, MN 55344 2138
Mar 13, 2007 Meeting multiple Federal Government Green Purchasing requirements, INTERCEPT® SPS shrink film, stretch film, flat stock, and bags protect products from corrosion and deterioration during shipment and long-term storage. HDPE film, infused with metallic copper particles and activated carbon, proactively neutralizes and removes corrosive elements in air around product while also killing any acid-producing bacteria, mold, or fungus. It has no chemical content and produces no fumes.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Mar 13, 2007 Pre-applied to board at corners of CSP pad site using standard dispensing system, one-component Loctite® Cornerbond(TM) 3508 cures during normal lead-free solder reflow, allowing for self-alignment of IC components. It provides 6-month shelf life, pot life greater than 75 hr, and ability to use standard refrigerated storage. Reworkable feature enables defective components to be removed without requiring entire assembly to be scrapped.

Epoxies Etc.
Cranston, RI 02921-3407
Mar 12, 2007 Electronics-grade UV-curable adhesive and potting compound, UV Cure 60-7108, adheres to most substrates and exhibits favorable exterior durability. It self levels in and around electronic components and is formulated to maintain its clarity over time. Suitable uses include fiber optics or other optical bonding applications.

Pres-On Products, Inc.
Addison, IL 60101
Mar 09, 2007 SG6400 Series Structural Glazing Tape is coated on both sides with acrylic adhesive that bonds instantly with fabrication materials such as vinyl, plastics, powder paints, bare metal, and glass. With rugged construction, high-strength open cell urethane foam tape resists fungi and oxidation to preserve performance and appearance of building structures. It is available in 1/8, ¼, or 3/8 in. thicknesses on rolls up to 50 ft long.

Adchem Corp.
Riverhead, NY 11901
Mar 08, 2007 Featuring pressure sensitive acrylic adhesive, fiber-filled Models 7742-74 and 7745-74 are 2 mils and 5 mils, respectively. Both provide optimal shear strength at elevated temperatures up to 300°F, and offer bond strength sufficient for splicing metal coils. Polyester fiber reinforcement provides roll stability when slit to widths as narrow as in 1/8 in. Tapes resist thermal cycling, salt solution, acid, brake fluid, and UV environments.

Huntsman Advanced Materials
Los Angeles, CA 90039-1011
Mar 08, 2007 Featuring chemical and moisture resistance, ARALDITE® Epoxy Adhesives are suitable for bonding and potting electronic components. Room temperature- and elevated temperature-curing products are RoHS-compliant and sag resistant. Providing lap shear strength, high-temperature ARALDITE® Polyurethane Adhesives can bond hard-to-join thermoplastic substrates and encapsulate pressure-sensitive components. All come in dual-barrel cartridges as well as bulk packaging for automated mixing/dispensing.

Master Bond, Inc.
Hackensack, NJ 07601
Mar 02, 2007 With service temperature range of -60°F to over 400°F, Type EP30HT epoxy produces high strength, rigid, chemical resistant bonds, and adheres to similar and dissimilar materials such as metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Product attains shear bond strengths over 3,200 psi, with volume resistivity greater than 1,015 W-cm, dielectric strength of 440 V/mil, and dielectric constant of 3.46 at 1 MHz.