Taylor Hobson Inc., a division of AMETEK

Test & Measurement

Roundness/Cylindricity System measures large-diameter parts.

Talyrond XL employs vertical column that sits on precision-bearing rails and can be adjusted and fixed in radial direction to suit diameter of part under test. This roundness and cylindricity measurement system accommodates large-diameter (up to 1,000 mm) and large-radial-swing components. Hi-res inductive gauge is attached to radial arm with 300 mm of travel, and frictionless air-bearing spindle...

Read More »
Automated Optical 3D Profiler features 10 pm resolution.
Controls & Controllers

Automated Optical 3D Profiler features 10 pm resolution.

As 3D surface-texture, step-height, and micro-dimensional measurement system, Talysurf CCI 6000 combines microscope-quality surface imaging with surface profiler measuring capability. It performs non-contact 3D measurement of components with all types of surfaces and materials up to 300 mmÂ-² in size. Measurement interferometer uses correlation algorithm to find coherence peak and phase...

Read More »
Roughness Tester simultaneously calculates 10 parameters.
Test & Measurement

Roughness Tester simultaneously calculates 10 parameters.

Freestanding or bench-mounted, portable battery-powered Surtronic 25 features stylus lift mechanism that allows vertical adjustment of 50 mm and rotation of pick-up to different measuring positions, including right angle or inverted measurements. With 2 buttons, user can scroll through menus and make selections before pressing MEASURE key. Multifunction port permits printer connection or export...

Read More »
Surface Profiling Systems accommodate up to 4 gauging heads.
Laboratory and Research Supplies and Equipment

Surface Profiling Systems accommodate up to 4 gauging heads.

Talysurf CLI Systems provide 3D surface profiling, as well as mechanical and analytical capabilities for 2D measurements. Models CLI 2000, 1000, and 500 offer measuring envelopes of 200, 100, and 50 mm, respectively. Chromatic Length Aberration Gauge, Laser Triangulation Gauge, and Inductive Gauge units are available to meet user requirements. Talysurf CLI Systems are suited for processes that...

Read More »
Interferometer delivers high-precision 3D topography.
Optics & Photonics

Interferometer delivers high-precision 3D topography.

Using correlation algorithm to find coherence peak position of interference pattern produced by selectable bandwidth light sources, Talysurf CCI 3000A delivers 3D surface texture, step-height, and micro-dimensional measurements in seconds. Unit can analyze polished, rough, specular, or scattered components having 0.3-100% reflectivity. With 0.1 angstrom measurement resolution, it measures...

Read More »
Measuring System offers nanometric resolution.
Test & Measurement

Measuring System offers nanometric resolution.

Form Talysurf PGI 1240 delivers 0.8 nm resolution over 12.5 mm seamless measuring range, delivering ability to measure form, roughness, radius, inclination, and contour in one traverse. System utilizes Phase Grating Interferometry and has 200 mm horizontal measuring traverse and 450 mm vertical positioning traverse. Additional offerings include 0.125 Â-µm horizontal data spacing, selectable...

Read More »
Non-Contact 3D Surface Profiler has 0.1 angstrom resolution.
Controls & Controllers

Non-Contact 3D Surface Profiler has 0.1 angstrom resolution.

Talysurf CCI 3000 scanning broadband interferometer finds coherence peak position of interference pattern produced by selectable bandwidth light source. Surfaces with reflectivity of 0.3-100% can be measured with 0.1 angstrom resolution over 100 Â-µm gauge range. Machine offers 0.03 angstrom rms repeatability and 200 mm height adjustment in work envelope and collects 1,048,576 data points for...

Read More »
Alignment System offers portable measurement capabilities.
Construction Equipment and Supplies

Alignment System offers portable measurement capabilities.

Portable laser based alignment system, Micro Alignment Laser, measures alignment, straightness, flatness, parallelism, perpendicularity, and more. With measurement ranges up to 20 x 20 mm and accuracies of 5 microns up to a distance of 10 m, it consists of highly stable laser transmitter, high-precision position sensitive device (PSD) receiver with electronic processing system, and software for...

Read More »
Video Alignment System simplifies engine re-machining.

Video Alignment System simplifies engine re-machining.

Micro Alignment Telescope with miniature camera attachment lets operator check for misalignment of engine bores when refurbishing large diesel engines. Operator can also adjust and correct bore alignment while directly viewing changes being made. This eliminates need for second engineer to adjust bores, and speeds and simplifies alignment process. After alignment, telescope can be left in place...

Read More »
Test & Measurement

Roundness/Cylindricity System measures large-diameter parts.

Talyrond XL employs vertical column that sits on precision-bearing rails and can be adjusted and fixed in radial direction to suit diameter of part under test. This roundness and cylindricity measurement system accommodates large-diameter (up to 1,000 mm) and large-radial-swing components. Hi-res inductive gauge is attached to radial arm with 300 mm of travel, and frictionless air-bearing spindle...

Read More »
Company News

Taylor Hobson Supports First UK Centre of Excellence in Metrology for Micro and Nano Technologies

LEICESTER, ENGLAND-AMETEK Taylor Hobson has joined with the UK Government in supporting a national Centre of Excellence in metrology for micro and nanotechnologies at Taylor Hobson's Leicester, England, headquarters. Taylor Hobson, a leading manufacturer of ultra-precision measurement instrumentation, has joined with the UK Department of Trade and Industry (DTI) in supporting a joint...

Read More »
Automated Optical 3D Profiler features 10 pm resolution.
Controls & Controllers

Automated Optical 3D Profiler features 10 pm resolution.

As 3D surface-texture, step-height, and micro-dimensional measurement system, Talysurf CCI 6000 combines microscope-quality surface imaging with surface profiler measuring capability. It performs non-contact 3D measurement of components with all types of surfaces and materials up to 300 mmÂ-² in size. Measurement interferometer uses correlation algorithm to find coherence peak and phase...

Read More »
Roughness Tester simultaneously calculates 10 parameters.
Test & Measurement

Roughness Tester simultaneously calculates 10 parameters.

Freestanding or bench-mounted, portable battery-powered Surtronic 25 features stylus lift mechanism that allows vertical adjustment of 50 mm and rotation of pick-up to different measuring positions, including right angle or inverted measurements. With 2 buttons, user can scroll through menus and make selections before pressing MEASURE key. Multifunction port permits printer connection or export...

Read More »
Surface Profiling Systems accommodate up to 4 gauging heads.
Laboratory and Research Supplies and Equipment

Surface Profiling Systems accommodate up to 4 gauging heads.

Talysurf CLI Systems provide 3D surface profiling, as well as mechanical and analytical capabilities for 2D measurements. Models CLI 2000, 1000, and 500 offer measuring envelopes of 200, 100, and 50 mm, respectively. Chromatic Length Aberration Gauge, Laser Triangulation Gauge, and Inductive Gauge units are available to meet user requirements. Talysurf CLI Systems are suited for processes that...

Read More »
Interferometer delivers high-precision 3D topography.
Optics & Photonics

Interferometer delivers high-precision 3D topography.

Using correlation algorithm to find coherence peak position of interference pattern produced by selectable bandwidth light sources, Talysurf CCI 3000A delivers 3D surface texture, step-height, and micro-dimensional measurements in seconds. Unit can analyze polished, rough, specular, or scattered components having 0.3-100% reflectivity. With 0.1 angstrom measurement resolution, it measures...

Read More »
Measuring System offers nanometric resolution.
Test & Measurement

Measuring System offers nanometric resolution.

Form Talysurf PGI 1240 delivers 0.8 nm resolution over 12.5 mm seamless measuring range, delivering ability to measure form, roughness, radius, inclination, and contour in one traverse. System utilizes Phase Grating Interferometry and has 200 mm horizontal measuring traverse and 450 mm vertical positioning traverse. Additional offerings include 0.125 Â-µm horizontal data spacing, selectable...

Read More »
Non-Contact 3D Surface Profiler has 0.1 angstrom resolution.
Controls & Controllers

Non-Contact 3D Surface Profiler has 0.1 angstrom resolution.

Talysurf CCI 3000 scanning broadband interferometer finds coherence peak position of interference pattern produced by selectable bandwidth light source. Surfaces with reflectivity of 0.3-100% can be measured with 0.1 angstrom resolution over 100 Â-µm gauge range. Machine offers 0.03 angstrom rms repeatability and 200 mm height adjustment in work envelope and collects 1,048,576 data points for...

Read More »
Alignment System offers portable measurement capabilities.
Construction Equipment and Supplies

Alignment System offers portable measurement capabilities.

Portable laser based alignment system, Micro Alignment Laser, measures alignment, straightness, flatness, parallelism, perpendicularity, and more. With measurement ranges up to 20 x 20 mm and accuracies of 5 microns up to a distance of 10 m, it consists of highly stable laser transmitter, high-precision position sensitive device (PSD) receiver with electronic processing system, and software for...

Read More »

All Topics