Dust Collector meets workplace air specs.
Dust / Fume / Mist Collectors

Dust Collector meets workplace air specs.

Gold Series(R) line of cartridge dust and fume collectors use Poly-Tech(TM) silicone-impregnated polyester/cellulose media. Collectors meet or exceed 5 mg/cu m emissions threshold on non-hazardous dusts required to recirculate air back into workplace. They are suitable for removal of all types of fine, dry dusts. Optional 99.99% efficient version removes 0.5 micron and larger particles for more...

Read More »
Dust Collector suits low headroom installations.
Dust / Fume / Mist Collectors

Dust Collector suits low headroom installations.

Side Winder Model DKCD 72030 is a 30 HP, 7,500 CFM dust collector featuring side mounted fan and flat envelope-shaped filters. It is only 122 in. tall, and typically used for collection of wood dust from maintenance shops and removal of powders caused by mixing or blending. Dust is collected in four 55-gal drums. Unit can be installed outdoors or indoors if local fire codes permit.

Read More »
Spill Kits are easy to locate.
Spill Kits

Spill Kits are easy to locate.

PIG(R) High Visibility MRO Spill Kits come in lime-green containers, making them easy to see, even in low light. Constructed of 100% polyethylene, they contain variety of socks, mats and pillows to absorb up to 61 gal of non-aggressive liquids. Kits are available in 95 gal and 65 gal sizes, and include yellow caution disposal bags, instructional manual, and emergency guidebook. Tamper-proof seals...

Read More »
Dust Collector allows continuous production.
Dust / Fume / Mist Collectors

Dust Collector allows continuous production.

Whirl/Wet Dust Collection System has radiused welds so that material cannot accumulate in unit. Its 100% polypropylene construction makes it highly resistant to mechanical damage. System is available in capacities from 500 to 50,000 cfm, and suitable for applications that generate dusts larger than 2 microns. It is self-cleaning and functions without pumps or internal moving parts. PLC monitors...

Read More »
Reverse Expansion Insert presses into plastic hole.
Inserts

Reverse Expansion Insert presses into plastic hole.

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...

Read More »
Plug converts sensors into controllers.
Controls and Controllers

Plug converts sensors into controllers.

SmartPlug adds control functions such as timing, counting, inverting and speed monitoring to sensors. Approximately 2 in. long, it connects between cable and sensor. Programming is done via teach input device available separately. Inverter version converts PNP input signal to NPN or vice versa, or NO to NC. Timer is programmable from 1 ms to 65 sec. Counter is programmable to count pulses or...

Read More »
Spill Cleanup Kit is available with refill rolls.
Absorbents

Spill Cleanup Kit is available with refill rolls.

Spill Kaddie mobile emergency kit picks up 22 gallons. It contains 1 roll of (200) 7 1/2 x 9 in. pads, (5) 3 in. x 4 ft socs, (8) 9 x 9 in. Pillows, 1 pair of goggles, 1 pair of Nitrile gloves, (5) 6 mil plastic bags, and 1 Emergency Response Handbook. Measuring 18 x 17 x 39 in., Spill Kaddie may be stored in space-constricted places, and offers black wheels for maneuverability. MRO-15 DPS 15 in....

Read More »
Control System monitors up to 16 different channels.
Controls and Controllers

Control System monitors up to 16 different channels.

Crakker(TM) self-contained high-speed logic/timing analyzer monitors I/O points with voltage inputs ranging from 5Vdc to 400Vdc or to 280Vac. It monitors and records each voltage transition and stores information to memory. This information is downloaded into Crackker Communications v3.0 program and analyzed. Transisitions are as fast as 165uS. Software includes single window programming function...

Read More »
Soldering Iron Control also handles hot plates.
Controls and Controllers

Soldering Iron Control also handles hot plates.

Compact Dial-Temp controller lets users make fixed temperature irons adjustable from 150°F to full heat, providing alternative to soldering stations. It works with any fixed temperature soldering iron up to 1,600 W, plugs into 115 Vac wall outlet, and has dial on top for adjusting tip temperature. Unit can moderate temperature of any 15 A device, including hot plates, melting pots, and wood...

Read More »
Controls and Controllers

Electronic Coast Control meets ASME safety standards.

CoastPRO(TM) Auto Coast Control System allows pallet truck operators to fluidly engage and disengage coast without flipping levers or plungers. Engagement buttons are placed within easy reach of operator's thumb for tactile activation. Truck is limited to speeds under 3.5 mph whenever coast system is engaged. Indicator light is positioned on top of control handle to assist operator in knowing...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers