Radar Level Transmitter provides non-contact measurement.
Controls and Controllers

Radar Level Transmitter provides non-contact measurement.

Installed above medium to be measured, MRL700 utilizes antenna to emit continuous microwave signal ramping between 9.55 and 10.55 GHz. It receives reflected echo, enabling microprocessor-controlled electronics to compute medium's level to accuracy of +/- 1/8 in. MRL700 features NEMA 4X metal enclosure, 4-wire 24 Vdc electronics, 1 in. thread mounting, and Teflon® antenna.

Read More »
Organic Odor Neutralizer eliminates commercial/industrial odors.
Controls and Controllers

Organic Odor Neutralizer eliminates commercial/industrial odors.

ECOSORB(R) breaks down and eliminates harmful gases, including hydrogen sulfide, sulfur dioxide, ammonia, ethyl mercaptan, and methyl mercaptan. It is diluted with water and sprayed into odorous areas as atomized mist. Droplets electrostatically attract molecules that form odor, then capture and neutralize them. Non-toxic, biodegradable, and safe to use in even the most confined areas, it is...

Read More »
Cycling Baler wraps up 60 tons/hr.
Balers

Cycling Baler wraps up 60 tons/hr.

Ram I series balers has cycle times as fast as 7 seconds and produces dense bales weighing over 2,000 lb. Large 41 x 80 in. hopper accepts large quantities of bulky materials, including OCC, ONP, paper, aluminum, and plastics. Compaction forces of up to 215 psi produce dense 43 x 43 in. bales. Length is easily adjusted during operation.

Read More »
Controls and Controllers

Motor Control eliminates servo dithering.

SilverMax(TM) controller has anti-hunt mode that keeps servo motor from dithering after it reaches its target position. Anti-hunt mode can also be maintained at low speeds as long as position errors are low. System is suitable for applications such as positioning microscope, antenna or camera, or when smooth control is required while stopped or at low speeds.

Read More »
Compactor delivers 7000 lbs of force.
Handling Equipment

Compactor delivers 7000 lbs of force.

PACK-MASTER provides compaction ratio of up to 7:1. It requires no dangerous high pressure air, hydraulic cylinders, or electric motors. Drum of material is placed on base and is compacted by ram lever. With optional wheel kit, unit can be moved from department to department. Machine is suitable for compacting disposable clothing, paper, filters, and aluminum cans.

Read More »
Protection Device guards inventory and equipment.
Protectors

Protection Device guards inventory and equipment.

Able to be used in both new and existing facilities, SEG(TM) forklift protection device is constructed of heavy-gage spring steel, and flexes when impacted. Its cushion action guides trucks into aisles between vertical racking systems, and eliminates possibility of impact between trucks and racks.

Read More »
Receptacles control smokers' waste.
Trash Cans and Waste Receptacles

Receptacles control smokers' waste.

Smoker's Station(R) receptacles provide safe and convenient way to dispose of cigarette butts. Cigarettes are snuffed out on extinguishing screen and dropped into receptacle. Fire-safe steel construction is weather and vandal resistant. Wall and pole mounted models are available in stainless steel or black textured Uni-Koat(R) powder coated steel/stainless steel combo. Keyed cam locks prevent...

Read More »
Portable Collector provides 382 sq ft of media.
Dust / Fume / Mist Collectors

Portable Collector provides 382 sq ft of media.

Rated at 1000 CFM, PortaAir(TM) has 1 1/2 HP motor and backward inclined fan that generates high suction at intake hood, even with dirty filters. Unit collects airborne contaminants with integral 11 ft, 8 in. dia, 360 deg rotating, externally supported arm, and deposits it in 2 pleated cartridge filters rated at 99.8% efficiency. Collector has 16 ga welded galvanized steel body; two 8 in....

Read More »
Vacuum offers 99.997% filtration efficiency.
Cleaning Equipment

Vacuum offers 99.997% filtration efficiency.

P300 portable dust extraction unit has manual reverse pulse filter cleaning system with filter life of 6,000 to 8,000 hr. It includes automatic start/stop for pneumatic tools, noise reducer, adjustable handle, and 4 wheels. Unit operates on 110 to 120 V and is suitable for cleaning workshops, on-tool extraction of grinding and sanding dust, and on-torch welding fume extraction.

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.
Other Milling Cutters

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics