Controls and Controllers

Johnson Matthey Partners with the Ports of Los Angeles, Long Beach and Union Pacific Railroad to Demonstrate Tier 4 PM Limits on a Switch Locomotive

The California Air Resources Board has awarded the Ports of Los Angeles and Long Beach and its consortium partners, Union Pacific Railroad and Johnson Matthey $346,000 to demonstrate DPF technology on a switch locomotive to achieve EPA Tier 4 PM standards MALVERN, PA, December 30, 2010-The California Air Resources Board (CARB) announced it has selected projects to demonstrate advanced clean...

Read More »
Laser Drivers optimize chemical sensor performance.
Controls and Controllers

Laser Drivers optimize chemical sensor performance.

Offering sub-Â-µA RMS noise, QCL Series minimizes linewidth, spectral drift, and center wavelength jitter. Quantum Cascade Laser Drivers feature 2-3 MHz bandwidth and rise/fall times of 250/200 nsec. Units drive up to 2 A of low noise current with current limit, slow start, brownout/reverse voltage/overvoltage protection, and remote or local current enable. Designed as OEM controllers,...

Read More »
Water Filters

Aquatech Awarded a Zero Liquid Discharge (ZLD) Contract for a Major Chinese Coal to Chemicals Project

Guangzhou, - Aquatech has been awarded a contract for a Zero Liquid Discharge (ZLD) plant for a coal to chemicals facility in Hailer in Inner Mongolia. The ZLD plant incorporates HERO(TM) (High Efficiency Reverse Osmosis) and a Thermal Brine Concentrator. The plant will treat 2400 m3/day of wastewater and reuse 92.5% of it, producing 2000 m3/day of process water and 220 m3/day of distilled water...

Read More »
Controls and Controllers

The World's Largest Ammonia Plant Successfully Commissions Cutler's MAX APC

BOERNE, Texas - The largest single train ammonia plant in the world has been successfully commissioned using Cutler Technology's MAX APC Controller. The plant, which is owned by a Saudi Arabian Fertilizer Company, is located in Al-Jubail, Saudi Arabia. Dr. Charles Cutler, creator of the matrix control algorithm, commented, "We built a MAX APC controller for the world's largest Ammonia Plant that...

Read More »
Berms

Spill Control Berms comply with federal tank truck regs.

Designed to help meet Spill Prevention, Control, and Countermeasure Plan requirements, Ultra-Containment Berms capture small and large spills from tanker trucks, military vehicles, and other heavy equipment. Drive in-drive out sidewalls lay down when driven through, then automatically spring back to upright position. Designed with chemical-resistant Copolymer-2000 material, berms come in standard...

Read More »
Injection Port Liners reduce breakdown of Endrin and DDT.
Chromatographs

Injection Port Liners reduce breakdown of Endrin and DDT.

Helping meet EPA method 8081A requirements, Injection Port Liner reduces breakdown of Endrin and DDT during injections while also increasing interval between liner changes. Application of crosslinked siloxane over conventionally deactivated liner results in injection port liner that contributes less to breakdown than any other component of injection system. Liner may be used in VICI injectors as...

Read More »
Media

Severn Trent Services Renews Agreement with the LANXESS Group to Distribute Bayoxide® Technology for Wastewater Applications

Bayoxide has proven highly effective for the removal of arsenic, heavy metals and inorganic contaminants. FORT WASHINGTON, Pa. - Severn Trent Services has renewed an agreement with the LANXESS group to distribute LANXESS' Bayoxide® E IN-20 and Bayoxide E33HC media, which provide a highly effective removal technology for arsenic, heavy metals and inorganics in wastewater treatment. The...

Read More »
High-Efficiency Cyclone Dust Collector has compact design.
Dust / Fume / Mist Collectors

High-Efficiency Cyclone Dust Collector has compact design.

Accommodating applications with limited floor space or overhead clearance, GPC Dust Collector is designed to optimize operational efficiency. Spiral inlet and ground-plate eliminate vortex reversal effect and subsequently required elongated body. Able to handle range of dry materials, horizontal/vertical product can reduce particulate emissions at processing plants, reclaim useful material from...

Read More »
Dust Collector separates ultra-fine sanding dust.
Dust / Fume / Mist Collectors

Dust Collector separates ultra-fine sanding dust.

Equipped with 5 hp Baldor motor and backward inclined fan wheel, Model V-5000 provides 1,498 cfm at 1.65 in. of static pressure. Unit features GE H12 certified HEPA media filter, which guarantees 99.97% filtration from 0.3-0.5 micron. Internal silencer quiets dust collector to 81 dBA at 10 ft. With 59 x 42 in. footprint and height of 90 in., Model V-5000 is suited for small spaces.

Read More »
Brüel & Kjær EMS Lands Burbank Airport NFTMS Project
Controls and Controllers

Brüel & Kjær EMS Lands Burbank Airport NFTMS Project

In a competitive bid process, which took more than 18-months to complete, the Brüel & Kjær EMS Team was chosen to replace the Noise and Flight Track Management System (NFTMS) for the Burbank-Glendale-Pasadena Airport Authority. The new 5-year contract includes the installation of 20 new Brüel & Kjær 3639 Noise Monitoring Terminals, backed by Brüel & Kjær's industry leading...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics