Controls and Controllers

Furnace Power/Control System decouples current, voltage control.

Electric arc furnace power system and control scheme offers improved control over arc ignition and arc stability while also reducing flicker and oscillation. Solution utilizes saturable reactor, located in power circuit between main transformer and arc electrodes, that is controlled by variable DC signal, which varies impedance of reactor. DC source is controllable as independent variable in...

Read More »
Absorbents

Universal Absorbent Pillow helps prevent hazard conditions.

Able to capture and absorb nuisance leaks at source before they hit floor, PIG® LEAKTRAPPER(TM) Universal Absorbent Pillow features loop-backed bottom and attaches securely to heavy-duty Velcro® hooks to facilitate positioning around hose connections or anything that leaks. Cellulose filler absorbs up to 33 oz of oil, coolant, solvent, or water per pillow, while puncture-resistant,...

Read More »
Absorbent Pads

Adhesive, Absorbent Mat increases workplace safety.

Offered in rolls, pads, rugs, or dispenser box, PIG® Grippy® Mat has adhesive bottom and soaks up leaks, drips, and overspray without bunching, curling, or sliding. Mat withstands high-traffic work areas/walkways and peels up without leaving residue. Featuring spunbond top layer with heavy-duty stitching and 8 layers of fine-fiber polypropylene, NFSI-certified product absorbs oils,...

Read More »
Controls and Controllers

Clean Diesel Technologies, Inc. Emission Control System Receives Expanded Verification by EPA and CARB

Expanded Product Line Addresses Government Emission Reduction Mandates for Fleet Operators VENTURA, Calif., -- Clean Diesel Technologies, Inc. (NASDAQ:CDTI) ( Clean Diesel"), a cleantech emissions reduction company, is pleased to announce that Engine Control Systems (ECS), its Heavy Duty Diesel Systems' wholly-owned subsidiary, has received an expanded verification from both the Environmental...

Read More »
Pollution Control Units clean up kitchen exhaust systems.
Controls and Controllers

Pollution Control Units clean up kitchen exhaust systems.

Designed to eliminate both smoke and grease particles, Grease Grabber(TM) Triple Play and Power Play feature control modules that eliminate or reduce odors. Triple Play, with 3-stage mechanical filter arrangement, is coupled with activated carbon panels to remove odor molecules prior to discharging air. Power Play's permanent electrostatic collector section removes grease and smoke particles from...

Read More »
Waste Compactor Monitor detects hydraulic fluid leaks.
Sensors / Detectors / Transducers

Waste Compactor Monitor detects hydraulic fluid leaks.

Combined with Wireless Waste Edge® Monitor, Leak Edge® option protects compactor users with fail-safe, automated real-time hydraulic fluid leak detection and sends remote alerts by text/email. System utilizes submersible level-sensing probe to identify hydraulic leaks of less than 6 oz, shuts down compactor to stop active leak, and auto-restarts when fluid level is restored. Monitors...

Read More »
Absorbents

FMC, Church & Dwight and TATA Chemicals Announce Air Pollution Control Joint Venture

PRINCETON, N.J., -- FMC Corporation, Church & Dwight Co., Inc., and TATA Chemicals (Soda Ash) Partners have signed a definitive agreement to form a partnership to manufacture and market sodium-based, dry sorbents for air pollution control in electric utility and industrial boiler operations. The sorbents, primarily sodium bicarbonate and trona, are used by coal-fired utilities to remove harmful...

Read More »
Controls and Controllers

CCI Thermal Technologies Inc. Announces UL C/US (Underwriters Laboratories) Hazardous Locations Certification for Caloritech(TM) Industrial Control Panels

Ontario - CCI Thermal Technologies Inc. is pleased to announce Caloritech(TM) industrial control panels have received cULus certification for hazardous locations under Class 1, Division 1 & 2. The cULus designation recognizes Caloritech(TM) control panels as being explosion proof, purged or intrinsically safe. The standards governing the UL certification include UL 698A, NFPA 496, UL 1203,...

Read More »
One-Piece Containment Berm features locking wall support.
Berms

One-Piece Containment Berm features locking wall support.

Used for secondary containment, Rigid-Lock Quickberm does not require assembly and features single-piece construction as well as foldable, right-angle locking wall support. One tug on side wall secures Rigid-Lock support into firm, locked position. When pushed, wall unlocks Rigid-Lock support and lays wall down. Rigid-Lock support can be driven over from any angle when in lowered position, and...

Read More »
Controls and Controllers

Inductotherm Displays Advanced Solutions for Energy Saving Options at TP/GIFA

Now that the dust has settled and the results are in, it is clear that Inductotherm Furnace Group, along with the rest of the Inductotherm Group, enjoyed another successful Thermprocess/GIFA Show in Dusseldorf, Germany. Inductotherm Furnace Group Displays ADVANCED SOLUTIONS for ENERGY SAVING OPTIONS In its most synergistic show yet, Inductotherm Group displayed a variety of advanced technologies...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics