Tools

Antimicrobials

Cu Healthy Products and Hussey Copper Announce a Partnership to Introduce the Copper Shark Touch Tool Made with EPA-Registered MD-Cu29 Antimicrobial Copper

PITTSBURGH - Hussey Copper, a leader in copper manufacturing, has entered into a new partnership with Cu Healthy Products, LLC™ of Morganton, N.C. to launch The Copper Shark™ touch tool made with the EPA registered MD-Cu(29) antimicrobial copper.Â-  Cu Healthy Products has designed an innovative shark-shaped touch tool used to minimize contact with potentially contaminated common...

Read More »
Swiss-Type Lathe features up to 9 total axes.
Tools

Swiss-Type Lathe features up to 9 total axes.

Available with or without rotary synchronous guide bushing, Nexturn SA32XII features up to 33 tools with optional B-axis, including 19 live tools. Machining capacity is 32 mm on main spindle andÂ- 32 mm on sub spindle with 8 in. max turning length in one chucking. Rated at 10 hp, 8,000 rpm, main spindle has built-in motor for optimized acceleration/deceleration. Full C axis on both main and...

Read More »
Terminal Crimping Tool combines durability and versatility.
Crimping Machinery

Terminal Crimping Tool combines durability and versatility.

Able to crimp insulated terminals to 10 AWG and non-insulated terminals to 8 AWG, 9-Inch Ergo Crimp Tool (p/n 16500) features straight plate lower jaw assembly that eliminates critical structural stress pointsÂ- to prevent breakage under heavy stress. Various crimp dies are available for CATV F,BNC, TNC, SMB, SMA, and N series coaxial connectors, and tool also accepts crimp die sets...

Read More »
Tools

Right Angle Grinders deliver maximum material removal.

Available in 1.6 hp and 2.2 hp motor options, respectively, Cleco® 1660 and 2260 Angle Grinders are compatible with industry standard depressed center wheel and cut-off abrasives, including 4, 4.5, 5, 6, and 7 in. Units feature streamlined angle head and all metal housing for ruggedness in abusive environments. Dual auxiliary handle positions, reversible throttle handle, and interchangeable...

Read More »
Compound Miter Saw features 10 in. carbide-tipped blade.
Tools

Compound Miter Saw features 10 in. carbide-tipped blade.

Powered by direct drive 13 A motor with soft start and no load speed of 4,300 rpm, Model LS1018 is suited for applications ranging from fine woodworking and carpentry to general construction. Saw miters 0–47° left and 0–60° right, with positive stops at 0, 15, 22.5, 31.6, and 45° (left and right). At 90°, Model LS1018 has 12 in. crosscutting capacity, with 8Â-½...

Read More »
Shaping Attachment machines complex features in one step.
Shapers

Shaping Attachment machines complex features in one step.

EPPINGER Shaping Attachment enables single-step machining of difficult-to-cut features, including grooves, Torx screw heads, splines, and gear teeth. Attachment drives cutter into workpiece in Z-axis at cutting speeds up to 1,000 strokes/min. At end of each stroke, integrated lift-off mechanism returns cutter to starting position without drag. With working stroke of 1.3 in. and max feed of 0.006...

Read More »
Drilling Machinery

DTH Hammers and Bits are designed for down-the-hole drilling.

Designed to increase productivity in reverse circulation (RC) drilling and conventional down-the-hole (DTH) drilling, BLH™ series includes valved BLH5 and BLH3 hammers as well as valve-less BLH1. Bits are available to support all BLH hammers. BLH5 delivers balanced operation with minimized vibration as well as optimized productivity in various ground conditions, and BLH3 adds steel valve...

Read More »
Metcal Receives an SMT China Vision Award for Its HCT2-120 Hot Air Pencil
Tools

Metcal Receives an SMT China Vision Award for Its HCT2-120 Hot Air Pencil

GARDEN GROVE, CA -- Metcal today announced that it has been awarded a 2014 SMT China Vision Award in the category of Rework Repair for its HCT2-120 Hot Air Pencil. The award was presented to the company during an April 23, 2014 ceremony at the Shanghai World Expo Exhibition Convention Center during NEPCON China. “We are thrilled that the product has been recognized by this award,” commented...

Read More »
Wire Cutter prevents cut pieces from getting lost.
Rope / Cable / Wire Cutters and Cutting Machinery

Wire Cutter prevents cut pieces from getting lost.

Suited for jewelry making, Model 9100F Oval Head Wire Cutter employs bypass cutting to produce clean, square cut. Built-in retainer promotes convenience as well as safety while also preventing cut wire from flying around work area and getting lost. Designed for soft wire up to 16 AWG, flush cutter can be held in either hand, is made from alloy steel with cutting edges hardened to RC 58-60, and...

Read More »

All Topics