Conformance Test Tool helps certify CIP Safety devices.
Available for CIP Safety on Sercos devices, Conformance Test Tool can be applied for originator and target implementations, no matter whether safety functionality is part of Sercos master or slave device. Tool makes it possible to automatically test full CIP Safety on Sercos protocol functionality of device to prove compliance with The CIP Safety specification. Identical test software can also be...
Read More »CAS MFC-R2 Emulator enables bulk call emulation, analysis.
Message Automation & Protocol Simulation (MAPS™) conformance test tool supports such protocols as SIP, MEGACO, MGCP, SS7, ISDN, and others in addition to Channel Associated Signaling (CAS) protocols, such as R1 Wink Start, Loop Start, E1 MFC-R2, and more. Client-side application can automate CAS testing procedure and let users establish single/bulk CAS calls as well as send/receive TDM traffic...
Read More »Texture Analysis Software complies with 21 CFR Part 11.
Intended for use with CT3 Texture Analyzers, Texture Pro CT v1.3 caters to 21CFR Part 11 compliance with controlled user access to specific test methods and data security for safe and permanent record keeping. Functionality helps users perform detailed texture analysis on test samples of various shapes and sizes while automating test procedure and removing operator bias. Able to run on 32- or...
Read More »Network Management Software monitors 500 client devices.
With Sinema Server v12, each Sinema Server station can display status of up to 100 other stations within network for total of 50,000 clients. Connected components are automatically identified via SNMP and Profinet devices via DCP. Continuously monitoring Ethernet and Profinet networks, software displays all physical port level connections as well as machine or application specific network...
Read More »
No Pencils Required: From Thinking to Knowing Through Mobility
This ebook provides a detailed guide on how mobility and digital data management systems (DDMS) can increase your company's overall effectiveness and efficiency.
Read More »Multibody Dynamics Analysis Software solves driveline problems.
With Dynamic FUSION, users can automatically generate Multibody Dynamics model at appropriate level of detail from RomaxDESIGNER or CONCEPT parametric model in seconds. Based on phenomena to be observed, user selects frequency range of interest and Dynamic FUSION automatically generates MBD model of minimum complexity needed to be accurate for that frequency. MBD model can then be translated and...
Read More »Universal Relay Firmware targets IEC electrical utilities.
Satisfying line protection operating speed requirements for IEC- and IEEE-oriented utilities, Universal Relay v7.2 maximizes performance of electrical systems' protection and control elements. Firmware generates segregated Phasor Measurement Unit data for up to 6 feeders. PMUs provide comprehensive transformer protection technology, removing need for dedicated rate of change of frequency devices...
Read More »Conformance Test Tool helps certify CIP Safety devices.
Available for CIP Safety on Sercos devices, Conformance Test Tool can be applied for originator and target implementations, no matter whether safety functionality is part of Sercos master or slave device. Tool makes it possible to automatically test full CIP Safety on Sercos protocol functionality of device to prove compliance with The CIP Safety specification. Identical test software can also be...
Read More »CAS MFC-R2 Emulator enables bulk call emulation, analysis.
Message Automation & Protocol Simulation (MAPS™) conformance test tool supports such protocols as SIP, MEGACO, MGCP, SS7, ISDN, and others in addition to Channel Associated Signaling (CAS) protocols, such as R1 Wink Start, Loop Start, E1 MFC-R2, and more. Client-side application can automate CAS testing procedure and let users establish single/bulk CAS calls as well as send/receive TDM traffic...
Read More »Texture Analysis Software complies with 21 CFR Part 11.
Intended for use with CT3 Texture Analyzers, Texture Pro CT v1.3 caters to 21CFR Part 11 compliance with controlled user access to specific test methods and data security for safe and permanent record keeping. Functionality helps users perform detailed texture analysis on test samples of various shapes and sizes while automating test procedure and removing operator bias. Able to run on 32- or...
Read More »Network Management Software monitors 500 client devices.
With Sinema Server v12, each Sinema Server station can display status of up to 100 other stations within network for total of 50,000 clients. Connected components are automatically identified via SNMP and Profinet devices via DCP. Continuously monitoring Ethernet and Profinet networks, software displays all physical port level connections as well as machine or application specific network...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
