Electronic Sockets

Test Sockets accommodate devices with pitches down to 0.3 mm.

RF test sockets, for use with PCBs, and CSP/BGA test and burn-in sockets, for use with burn-in-boards (BIB), feature solderless, gold over nickel-plated pressure mount compression spring probes that are mounted with 4 SS screws, which allows for height variations in device thickness. Units also include 4-point spring probe crown to insure scrub on solder ball oxides. Signal path during test is...

Read More »
Electrical Connectors

Socket is designed for use with silicon USB blades.

Suited for military and industrial applications, SBS Series SiliconBlade Socket can be used with SiliconDrive II USB Blade. Rugged, lightweight, and vertical unit includes Edge Rate contact system which offers Signal Integrity with high impedance control, reduced broadside coupling, and vibration dampening features. Deep polarizing guide rails add mechanical support and assure proper USB Blade...

Read More »
Electronic Sockets

BGA Socket accommodates devices up to 6.5 mm².

Suited for use with test and burn-in of CSP, MicroBGA, DSP, LGA, SRAM, DRAM, and Flash devices, CSP/MicroBGA Test and Burn-In Socket accommodates up to 500,000 cycles and operates from -67 to 302°F. It offers solderless pressure mount compression spring probes which allow sockets to be mounted to and removed from burn-in-board (BIB). Unit also features pressure pad compression spring that...

Read More »
Lamp Sockets

CFL Lampholder comes with bi-pin configuration.

Compliant with ENERGY STAR and California Title 24 standards, GU-24 base Bi-Pin Twist-Lock Lampholder offers light fixture manufacturers non-screwshell configuration for accommodating integrated CFLs. Available in bracket-, collar-, and panel-mount versions and made of thermoplastic body material, cUL listed and UL 94V-0 flammability rated unit is suited for all types of fixture designs including...

Read More »
BGA Socket features 0.028 pF capacitance to ground.
Electronic Sockets

BGA Socket features 0.028 pF capacitance to ground.

Designed for processor with POP memory socketed on top, Model SG-BGA-7116 operates at bandwidths up to 40 GHz with less than 1 dB of insertion loss. It features typical contact resistance of 100 mW per pin, 5 A per pin current capacity, -40 to +100°C temperature range, and self and mutual inductance of 0.11 and 0.028 nH, respectively. Unit is constructed with high performance and low...

Read More »
Wright Tool Changes ¾-Inch Drive 12-Point Impact Sockets
Tool Sockets

Wright Tool Changes ¾-Inch Drive 12-Point Impact Sockets

BARBERTON, OHIO - June 2008 - Wright Tool Company recently changed its line of standard length Â-¾-inch drive 12-point impact sockets. The 12-point impact sockets are available in 28 sizes, ranging from 9/16 inches to 2-3/8 inches. These impact sockets have the same wall thickness as traditional six-point impact sockets for added strength and performance to meet users' demands. As with any...

Read More »
BGA Sockets are developed for 0.8 mm pitch SDRAM.
Electronic Sockets

BGA Sockets are developed for 0.8 mm pitch SDRAM.

Operating at bandwidths up to 8 GHz with less than 1 dB of insertion loss, SG-BGA-6252 is designed for 9 x 11 mm, 0.8 mm pitch, 60 pin BGA package while SG-BGA-6253 is designed for 9 x 13 mm, 0.8 mm pitch, 84 pin BGA package. BGA sockets dissipate up to several watts without extra heat sinking and can dissipate greater amount with custom heat sink. They feature contact resistance of 25 mW per...

Read More »
Electronic Sockets

LED Socket supports solid-state lighting.

Minimizing component count, LED Sockets permit automated high-speed pick-and-placement of LEDs and resistors. Units include heat sink and can connect with standard Edison-base, GU 24-base, or custom interfaces. Compatible with reflow solder, sockets run directly from 110 V, eliminating need for driver, transformer, or inductor.

Read More »
Compact Fluorescent Lampholder is ENERGY STAR-qualified.
Lamp Sockets

Compact Fluorescent Lampholder is ENERGY STAR-qualified.

Designed for installation in enclosed areas, Compact Fluorescent Ceiling Lampholder (Cat No. 9860) provides safe, energy-efficient lighting while complying with NFPA 70, NEC Section 410.16 fire safety standards. It uses 13 W GU24 bi-pin bulb that lasts over 10,000 hr and is designed for use with any standard, non-illuminated wall switch. Available with or without 13 W bulb and lamp guard,...

Read More »
Electronic Sockets

High-Bandwidth Socket accommodates 0.65 mm pitch LGA ICs.

Designed for 12 mm package size, XG-LGA-7000 Socket operates at bandwidths to 40 GHz with less than 1 dB of insertion loss. It dissipates up to several watts without extra heat sinking and can handle up to 100 W with custom heat sink. Constructed using elastomer with gold-plated, barbed pad connecting to IC Pad, socket offers characteristics such as 50 mW per pin (typ) contact resistance, 0.11 nH...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers