Electronic Sockets

Center Probe Test Socket facilitates device burn-in.

Accommodating devicea 6.5 mm or smaller, high-frequency center probe test socket is suited for use with test and dynamic burn-in of CSP/MicroBGA/DSP/LGA/SRAM/DRAM/Flash devices. Socket is comprised of compression spring probes made of heat-treated beryllium-copper alloy plated with 0.75 Â-µm gold per Mil-G-45204 over 0.75 µm nickel per SAE-AMS-QQ-N-290. Spring probes feature contact...

Read More »
Reid Supply Introduces Lifetime Warranty on New Line of Hand Tools B2B
Tool Sockets

Reid Supply Introduces Lifetime Warranty on New Line of Hand Tools B2B

Reid Supply Company's President, John Carrier announced today the addition of a new line of lifetime warranty hand tools featuring a new line of GRIPSTRIP(TM) technology sockets and socket sets. These integrated color-coded and non-slip sockets are an industry first and Reid Supply has them ready to ship. These and thousands of industrial products for every industry are featured on their...

Read More »
Electronic Sockets

QFN Socket operates at bandwidths up to 40 GHz.

Designed for 0.5 mm pitch QFN 24 pin IC's, DG-QFN24C-01 socket comes in 4 x 4 mm package with less than 1 dB of insertion loss. Constructed with low inductance diamond particle interconnect contactor, it can dissipate up to several watts without extra heat sinking and handle up to 100 W with custom heat sink. Unit features operating temperature range of -70 to +200°C and contact resistance...

Read More »
Samtec Adds New Rugged, Power & I/O Interconnect Products
Electrical Connectors

Samtec Adds New Rugged, Power & I/O Interconnect Products

Samtec has added new rugged interface products, including PowerStrip/35 high power interconnects, AccliMate(TM) and LifeJack(TM) I/O interfaces and Tiger Eye micro rugged discrete wire system, to its standard product offering. PowerStrip/35 high power connector strips (PES/PET Series) can handle up to 35 amps and are available as an all power interface, or as a combination signal/power system...

Read More »
Aries Electronics' New Test and Burn-In and RF Sockets
Electronic Sockets

Aries Electronics' New Test and Burn-In and RF Sockets

Bristol, Pa. September 2008 - Aries Electronics, an international manufacturer of standard, programmed and custom interconnection products, has recently updated its CSP/BGA test and burn-in and RF sockets, including 13 mm squared, 27 mm squared, 40 mm squared and 55 mm squared models, to accommodate devices with pitches down to 0.3 mm. With this new pitch capability, Aries' sockets are suitable...

Read More »
Electronic Sockets

BGA Socket has cycle life of 500,000 insertions.

Designed for 11 x 11 mm, 0.65 mm pitch, 15 x 15 array 225 balls, ASE 225 LTFBGA SS-BGA225G-01 is 10 GHz high endurance socket that can be used for hand test and burn-in applications. With 16 g actuation force per ball and -40 to +150°C temperature range, spring pin contactor has self inductance of 1.3 nH, insertion loss of less than 0.25 dB at 4.5 GHz (less than 3dB at 10GHz), capacitance...

Read More »
Electronic Sockets

Test Sockets accommodate devices with pitches down to 0.3 mm.

RF test sockets, for use with PCBs, and CSP/BGA test and burn-in sockets, for use with burn-in-boards (BIB), feature solderless, gold over nickel-plated pressure mount compression spring probes that are mounted with 4 SS screws, which allows for height variations in device thickness. Units also include 4-point spring probe crown to insure scrub on solder ball oxides. Signal path during test is...

Read More »
Electrical Connectors

Socket is designed for use with silicon USB blades.

Suited for military and industrial applications, SBS Series SiliconBlade Socket can be used with SiliconDrive II USB Blade. Rugged, lightweight, and vertical unit includes Edge Rate contact system which offers Signal Integrity with high impedance control, reduced broadside coupling, and vibration dampening features. Deep polarizing guide rails add mechanical support and assure proper USB Blade...

Read More »
Electronic Sockets

BGA Socket accommodates devices up to 6.5 mm².

Suited for use with test and burn-in of CSP, MicroBGA, DSP, LGA, SRAM, DRAM, and Flash devices, CSP/MicroBGA Test and Burn-In Socket accommodates up to 500,000 cycles and operates from -67 to 302°F. It offers solderless pressure mount compression spring probes which allow sockets to be mounted to and removed from burn-in-board (BIB). Unit also features pressure pad compression spring that...

Read More »
Lamp Sockets

CFL Lampholder comes with bi-pin configuration.

Compliant with ENERGY STAR and California Title 24 standards, GU-24 base Bi-Pin Twist-Lock Lampholder offers light fixture manufacturers non-screwshell configuration for accommodating integrated CFLs. Available in bracket-, collar-, and panel-mount versions and made of thermoplastic body material, cUL listed and UL 94V-0 flammability rated unit is suited for all types of fixture designs including...

Read More »

All Topics