FPC Testing Socket features horse-shoe shaped contact.
Electronic Sockets

FPC Testing Socket features horse-shoe shaped contact.

Supporting ultra fine pitches down to 0.3 mm, LC Series Clip Type Socket features specially designed contacts that carry out micro wiping action, ensuring stable, low contact resistance. Elevator stage prevents FPC pads from being damaged or scratched while simultaneously protecting contacts during FPC load/unload operation. As output options, customer can choose discrete wiring, MIL Std., or FPC...

Read More »
Electronic Sockets

High-Temperature BGA Socket has contactor with 500,000 cycle life.

Model CBT-BGA-6014 is suited for testing 13 x 13 mm BGA with 1 mm pitch and 144 pins. It features stamped spring pin contactor with 19 g actuation force/ball and inductance of 0.93 nH, insertion loss of less than 1 dB at 23.2 GHz, and contact resistance of less than 16 mW. Current capacity of each contactor is 8 A at 80°C temperature rise, and socket temperature range is -55 to...

Read More »
Electronic Sockets

BGA Socket accommodates 0.4 mm pitch BG221.

Intended for 0.4 mm pitch 221 ball BGA, SG-BGA7162 socket is used to verify function of IC in development system with superior electrical performance. It operates at up to 10 GHz with less than 1 dB insertion loss and mounts on PCB without any soldering. All pins are connected with 10 GHz bandwidth on all connections, and contact resistance is 20 mW typ per I/O. Quick insertion method accelerates...

Read More »
Electronic Sockets

WLCSP Socket verifies IC function in development systems.

Operating at bandwidths up to 10 GHz with less than 1 dB insertion loss, SG-BGA-7203 allows testing of 2 different WLCSPs - 0.5 mm pitch, 40-ball WLCSP and 0.4 mm pitch, 30-ball - in one socket, side by side. Contact resistance is 20 mW typ per I/O, and socket connects all pins with 10 GHz bandwidth on all connections. Mounted without soldering on target PCB using supplied hardware, socket...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Solderless LED Socket complies with UL-1977 specifications.
Electronic Sockets

Solderless LED Socket complies with UL-1977 specifications.

Designed for use with Philips Lumileds LUXEON(TM) S LED, Type LS Socket utilizes insulation displacement technology to facilitate termination of 24 AWG wires to socket. Plastic frame locator enables positioning of LED on heat sink, while integral stainless steel spring makes sure uniform and adequate normal force is applied to LED for optimum thermal performance. Designed to maximize optical...

Read More »
Electronic Sockets

IC Test Adapter supports 0.8 mm pitch, 96-position BGA ICs.

Model PA-BGA96C-Z-01 probing and prototyping adapter for testing clock driver ICs includes GHz BGA socket. It features pin self-inductance of 0.11 nH and mutual inductance of 0.028 nH, while capacitance to ground is 0.028 pF and current capacity is 2 A/pin. Operating over temperature range of -35 to +100°C, unit is mounted on PCB which interfaces BGA socket to 0.100 in. center pin grid...

Read More »
BGA Socket addresses burn-in characterization requirements.
Electronic Sockets

BGA Socket addresses burn-in characterization requirements.

Featuring floating guide for precise ball to pin alignment, Model CBT-BGA-6011 supports 9 x 12 mm, 1 mm pitch, 48-position, 9 x 11 ball array configuration. Contactor delivers 0.93 nH self inductance, insertion loss of less than 1 dB at 23.2 GHz, and contact resistance of less than 16 mW. Current capacity for each contactor is 8 A at 80°C temperature rise. Operating from -55 to...

Read More »
Pistons

Leading Federal-Mogul Technologies Featured on 2011 North American Car and Truck of the Year

SOUTHFIELD, Mich. - Federal-Mogul Corporation (Nasdaq: FDML), a global leading supplier of automotive technologies, today announced that it is supplying various components for the 2011 North American Car and Truck of the Year, revealed at the North American International Auto Show in Detroit. Federal-Mogul innovations on the 2011 Chevrolet Volt electric vehicle - the North American Car of the...

Read More »
Electronic Sockets

Spring Pin BGA Socket tests digital camera processors.

Configured to test 13 x 13 mm, 0.65 mm pitch, 293 position, 19 x 19 ball array, CBT-BGA-7005 features contactor with stamped spring pin, 26 g actuation force per ball, and cycle life of 500,000 insertions. Self inductance of contactor is 0.88 nH, insertion loss is less than 1 dB at 15.7 GHz, and capacitance is 0.097 pF. Designed with floating guide for precise ball to pin alignment, socket...

Read More »
Ratchets

Wright Tool Introduces New Tool Test Program Allowing Contractors to Put Tools to the Test

BARBERTON, OHIO - Wright Tool introduces its new tool test program that challenges contractors to test Wright Tool's U.S.A.-made tools for superior safety, professional quality, and the highest value for the price. The tool test program allows contractors to request up to eight different Wright Tool products through the online site (www.wrighttool.com/tooltestsafety) and use them for 30 days from...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics