Processor PMCs suit deeply embedded applications.
Models EPC-6320 and EPC-6321 are based on 933 MHz IntelÃ-® PentiumÃ-® III processor and come with 512 MB or 1 GB memory. Model EPC-6321 is offered with dual gigabit Ethernet via Jn4 connector, making it PICMG 2.15 compatible. Integrated 82600 chipset allows either unit to become Monarch or Non-monarch PrPMC via automatic configuration. Both feature PhoenixBIOS 4.0, release 6.0 with 4MB of...
Read More »Single Board Computer works with -µC/OS-II kernel.
Flashlite 186 SBC is a DOS-based embedded controller powered by 186 compatible microprocessor. It includes 2 serial ports, 44 digital I/O lines, 512 K DRAM, 512 K Flash memory, and socket for expanding non-volatile memory. MicroC/OS-II is a portable, ROMable kernel for microprocessors and microcontrollers that can manage up to 63 application tasks. Development kit provides evaluation platform for...
Read More »
Single Board Computer provides multiple I/O options.
Powered by Intel Celeron/Pentium 4 or Pentium 4 Mobile processors, PCM-8500 Compact Board SBC has onboard CompactFlash Type II and PCMCIA sockets and 6 USB 2.0 ports. It employs Intel's 82845GV chipset and supports Intel Hyper-Threading Technology. Board offers memory capacities to 1 GB DDR SDRAM with one socket and features integrated 2D/3D graphics engine with AGP 4x bandwidth; 48-bit, dual...
Read More »
SBC provides up to 1 GB/s bandwidth.
Dual-slot VME single board computer model VMIVME-7810 employs IntelÃ-® PentiumÃ-® M processor coupled with Dual Data Rate SDRAM memory, Dual Gigabit Ethernet, and 400 MHz PCI-X internal bus. It provides 1 MB L2 Advanced Transfer Cache, Micro-ops fusion, dedicated stack manager capabilities, and advanced instruction prediction capability. At 1.6 GHz, product also features 2 serial ports,...
Read More »
How to Properly Implement Welding Automation to Improve Return on Investment (ROI)
Learn more about the value of automated welding systems, how to calculate your automation ROI, and how to get started.
Read More »
PCI Mezzanine Card features front panel data port interface.
Single-wide Model PMC-DPDP provides high-speed data acquisition in VME or CompactPCI SBCs used for digital signal processing. It is based on PLX PCI 9656 chip, which provides 32/64-bit, 33/66 MHz PCI bus master/slave interface with linked list DMA engine, enabling data throughput speeds greater than 100 Mbytes/sec. Control logic is handled by user-programmable Altera EP1S10 FPGA, with 64 Kbytes...
Read More »
PC/104 Module delivers 4 serial ports, video, and Ethernet.
Designed as migration product, CoreModule 420 PC/104 SBC suits space-constrained embedded applications that require 4 serial ports, 10/100BaseT Ethernet, and video on one board. I/O addresses and IRQ mappings allow unit to be configured to match setup of legacy solutions. Based on STPC Atlas microprocessor running at 133 MHz, SBC provides 8 general-purpose I/O pins, EPP/ECP parallel port, one USB...
Read More »PICMG 2.16 Blade suits military/communications networks.
Compliant with PICMGÃ-® 2.16 standard, cPB-4610 Single Board Computer features 400 MHz Front Side Bus for use in Packet Switched Backplane platforms. PentiumÃ-® M cPCI Blade has single slot form factor and comes with 1 and 2 MB L2 cache, 855PM chipset, and 256 or 512 MB ECC DDR200/266 SDRAM memory. Processor speeds varies from 1.1-1.8 GHz depending on cache configuration. Product comes...
Read More »Single Board Computer is compliant with PICMG 2.16 standard.
Model cPB-4614 supports IntelÃ-®'s PentiumÃ-® M Processor family utilizing 855PM chipset with 400 MHz front side bus. Memory array based on two SO-DIMM sockets supports 256 MB to 2 GB with ECC protection. Board management is supported via PICMGÃ-® 2.9 compliant IPMI based satellite controller. Hot-swappable SBC includes one 10/100/1000 Mbps Ethernet port and one 10/100 Mbps Ethernet...
Read More »
Hub Board is PICMG 3.0/3.1 compliant.
Model ATS-1136 Switch Blade is an AdvancedTCAÃ-® hub board for Dual-StarFabric based ATCA shelf. It features 36 Gigabit Ethernet ports in 8U specification and switches base and fabric at Gigabyte Ethernet wire-speed. Unit offers two 10/100/1000 Gigabit Ethernet copper egress ports on front panel and three copper 10/100/1000 ports on rear panel. System management of temperatures and voltages...
Read More »Computer-on-a-Module features FPGA for embedded applications.
Embedded System Module EM04N includes 266 or 400 MHz Kahlua II PowerPC processor and Altera Cyclone FPGA with 250,000 gates. FPGA accommodates TFT display controller, touch-screen controller, 2 CAN controllers, and 8 UARTs. Module features slot for SO-DIMM with 256 MB DRAM and slot for CompactFlash memory. Two RS232 channels and 2 Fast Ethernet ports can be accessed on front of board....
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
