Servomotors

Gearless Motors deliver more than 100 lb-in. torque.
Servomotors

Gearless Motors deliver more than 100 lb-in. torque.

Featuring enclosed construction, e-TORQ Direct Drive Brushless DC Servo Motors are available in widths under 2 in. and diameters from 7-14 in. and larger. Compact products employ electromagnetic design with ironless stator. Lack of iron saturation provides maximum torque linearity, meaning that torque is consistent across speed range without cogging or velocity fluctuations. Motors are offered...

Read More »
Sinusoidal Servo Motors deliver 450 and 900 W.
Servomotors

Sinusoidal Servo Motors deliver 450 and 900 W.

Brushless Series BS/BSE features IP65 protection, rotor with permanent NeFeBr magnets, thermal cut-out switch, and class F winding. Series BSE includes planetary reduction unit. Drivert 300 and 1000 models are digital drives with resolver and DSP technology for sinusoidal brushless servo motors. They provide dynamic control of speed, torque, and position of driving shaft. Keypad and 5-digit...

Read More »
Brushless Servo Motor has 16 mm through bore in shaft.
Servomotors

Brushless Servo Motor has 16 mm through bore in shaft.

HO Series combines NEMA 23 mounting with through hole, encoder, and slotless motor construction, eliminating unwanted magnetic disturbances. Motors come with internally mounted glass encoder grating and encoder read head. Resolutions greater than 29,000,000 counts/revolution can be achieved with repeatability at 0.3 microradians, and torque curves have less than 1% harmonic distortion. Wires,...

Read More »
Brushed DC Servo Motors are suited for medical devices.
Servomotors

Brushed DC Servo Motors are suited for medical devices.

Brushed-type, permanent magnet, dc servo motors are offered in 60, 90, and 110 mm dia with respective NEMA frame sizes of 23, 34, and 42. Winding voltages of 12, 24, 36, and 48 V ensure compatibility with industry-standard motor drives available to satisfy torque requirements from 40 to 2,100 oz-in. Applications include factory automation, packaging machines, robotics, coil winders, converting...

Read More »
Servomotors

DC Servo Motor includes integral analog tachometer.

Measuring 2.14 in. dia x 5.96 in. long with 0.375 in. dia stainless steel output shaft, Model MMP-C21.175E-24V.T-03 requires 3.4 A at 24 Vdc to generate full power. Integral tachometer provides positive, linear feedback signal for closed-loop servo applications at rate of 3 Vdc per 1,000 rpm of rotation. Delivering 80 W of continous output power at 5,000 rpm, motor is rated for 30 oz-in. of...

Read More »
Linear Servo Motors do not require liquid cooling.
Servomotors

Linear Servo Motors do not require liquid cooling.

Measuring 50 mm wide, AL2400 series includes 2 motors with peak force of 120 or 240 N. They have pole spacing of 24 mm, reach speeds up to 8 m/s, and are operated with 230 Vac. Offered in 4 models, AL2800 series produces peak forces up to 9,000 N, measure 130 mm wide, and are operated with 400-480 Vac. Pole spacing is 24 mm, and motors reach speeds from 2.5-6 m/s. Products are designed with...

Read More »
Pole-Wound Servomotors offer torques from 0.18-53 Nm.
Servomotors

Pole-Wound Servomotors offer torques from 0.18-53 Nm.

Series AM3000 Synchronous Servomotors feature sealed windings and are available with 7 flange sizes. Housings, made from single piece of metal, produce no negative impact on stability through material transitions that increase thermal resistance. Rotatable plug connectors for power and feedback facilitate machine wiring. Pressed bearings prevent axial motion of shaft. Tight tolerances result in...

Read More »
Linear Servomotor has high precision and simple construction.
Servomotors

Linear Servomotor has high precision and simple construction.

Direct-drive, backlash-free, Shaft Motor is driven by magnetic circuits consisting only of permanent magnets and coils. Coreless construction eliminates cogging, while high resolution of 0.14 nm makes motor suited for precise positioning. Unit provides virtually no fluctuation in speed and quiet operation due to absence of friction. It operates in harsh conditions such as vacuum situations and...

Read More »
Servomotors

DC Servomotor offers 280 oz-in. peak torque.

Accepting 12 Vdc, Model MMP-C21.230B-12V measures 2.14 in. dia x 4.8 in. long and has dual output shafts of 0.375 in. dia. Mounting is accomplished with 4 face mount, No. 6-32 threaded holes, equally spaced on 1.531 in. dia BC. Rated for 40 oz-in. of continuous torque at 2,500 rpm, motor requires just 7.5 A at 12 Vdc to generate full load output torque. Optical encoders, failsafe brakes, analog...

Read More »
Servomotors

DC Servo Motor offers 40 oz-in. continuous torque.

Accepting 24 Vdc, Model MMP-C21.230B-24V measures 2.14 in. dia x 4.8 in. long and has dual output shafts of 0.375 in. dia. Capable of delivering nearly 150 W of continuous output power at 5,000 rpm, unit requires 7.5 A at 24 Vdc to generate 1/5 hp continuous rating. Mounting is accomplished with 4 face-mount No. 6-32 threaded holes, equally spaced on 1.531 in. dia BC. Options include optical...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics