Brushless DC Servo Motors feature slotless stator design.
PITTMANÃ-® ELCOM SLÃ-® Motors are available in 3 frame sizes with 4-pole rotors and neodymium magnets. They achieve speeds up to 8,000 rpm and peak torques from 13.3-195 oz in., depending on model. Offering hardened stainless steel shafts, negligible magnetic cogging, and large magnetic air gap, modular motors are suited for data storage, medical/biotech, semiconductor, automation,...
Read More »Integrated Servomotors are rated to 400 and 750 W.
MAC Brushless Servomotors include controller/driver, Hall sensor, and encoder in single unit. Models MAC50-141 operate from 24 or 48 Vdc, while Models MAC400-800 require 115/230 V. Interface possibilities include PC/PLC with drive commands via RS232/485/422, pulse/direction or quadrature input, and register mode via 4 inputs or serial commands. Motors are also available with fieldbus option or...
Read More »
Brushless Servo Motors are suited for cold environments.
Size 23 Cryogenic Series motors with resolver feedback, engineered for motion control applications, operate reliably in temperatures down to 20Ã-
Read More »
Rotary Servomotors provide speeds to 1,200 rpm.
CARTRIDGE DDR Direct Drive Servomotors feature pre-engineered components, factory-aligned feedback device, and bearing-less design that facilitates mount-and-run operation in under 30 min. Two frame sizes are available, with 3 stack lengths per frame. Voltage ratings include 230, 400, and 480 V. Motors provide 50-510 Nm continuous torque and 1,100 Nm peak torque. CE marked and UL listed for...
Read More »
Servo Motors have integral sensor module.
Models 1FK7 and 1FT6 synchronous servo motors and 1PH7 asynchronous servo motor are available with integral sensor module. Able to evaluate motor encoder signal and record diagnostics data, module transmits data to Sinamics drive converter system via Drive-Cliq interface. Motor-specific information is saved in sensor module, which incorporates servo motors into Sinamics architecture and permits...
Read More »Brushless Servomotors deliver 574 oz-in peak torque.
Series TG2300, NEMA 23 Frame, DC Servomotors provide acceleration and deceleration of loads at up to 7,200 rpm. Electromotive coil technology uses multiple precision-machined copper sheets to replace magnet wire and iron core, eliminating magnetic saturation, eddy currents, and hysteresis. Model TG2300-120-81920E delivers peak current of 70 A and continuous power density of 7.5 W/oz. Motors...
Read More »
Servomotors have global platform for design flexibility.
Available in 12,000+ standard offerings, Kollmorgen AKM servomotors utilize electromagnetic design with global feature set. Motors are wound with non-overlapping coils, reducing potential for phase-to-phase shorting, and assemblies are potted and IP65 sealed. Products are available in 7 frame sizes with 25 stack/frame combinations, 77 standard windings, and 19 mounting patterns. They provide...
Read More »
Integrated Servomotor incorporates Modbus-® protocol.
SilverMaxÃ-® combines motor, controller, driver, and encoder and allows register mapping between SilverMax and Modbus hosts such as PLCs, HMIs, and PCs. Multi-tasking ability allows application program to run while registers are being read and modified by Modbus host. Third-party products such as AnyBusÃ-® can be used to attach to Fieldbus networks such as Profibus, DeviceNet, or Ethernet.
Read More »
Servo Motors suit food and beverage industry.
Food-grade MP Series Motors offer continuous stall torque of 14-176 lb-in. and include shaft seal with hardened wear sleeve. They are IP66- and IP67-rated with stainless steel motor shaft and fasteners providing corrosion resistance and protection against liquid contamination. IP67-rated connectors can be rotated 180Ã-
Read More »
Brushless DC Motors and Gearmotors have slotless design.
ELCOM SLÃ-® 3-phase, 4-pole brushless DC servo motors and gearmotors utilize design that eliminates magnetic cogging. Magnetic air gap minimizes viscous torque losses, while winding heat transfer is provided for thermal efficiency and transient load capacity. Products are available in 3 frame sizes with rotor construction that allows rotational standard speeds up to 8,000 rpm. Modular design...
Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.
Read More »
