
JVL Integrated Motors Feature Fast and Easy Setup for Rockwell Automation/Allen-Bradley PLC's
Birkerød, Denmark – After the successful introduction of the complete range of ServoStep integrated motors JVL is now releasing Add-On-Instructions for fast and easy setup and programming in Rockwell Automation’s Studio 5000 software. All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and Ethernet Switch as well as TÜV-approved STO option. The integrated design...
Read More »
New MAC Motor from JVL Eliminates the Need for Separate Servo Driver or Controller
The MAC® Motor with 3000 W rating is combined with high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC. The motor come in 311.8 mm length and deliver torque of 9.55/28.6 Nm at 3000 rpm. The motor is supplied with power via 3x400 VAC M23 connectors and is offered with Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen and Profinet...
Read More »
Kollmorgen to Present Next Generation Robotic Motion Solutions for Robotic Applications at ROBO Business Expo 2018
RADFORD, VA – August 29, 2018 – Attendees of the 2018 ROBO Business Expo (September 25-27, in Santa Clara, CA) are invited to visit Booth #505, where Kollmorgen will feature its newest motion solutions for designers and manufacturers of commercial robotics and intelligent systems. Throughout the show, the company will offer exciting live demos and experts will be available to discuss...
Read More »
CUI Offers NEMA AMT112S Stepper Servo Motors Paired with Encoders for a Reliable Motion Control Feedback Solution
The NEMA AMT112S Stepper Servo Motors are offered in NEMA 8, 11, 14, 17, and 23 frame sizes with a step angle of 1.8°. The motors and encoders when paired with controller offer closed-loop feedback for a complete servo system. The AMT11 incremental encoders come with a digitally set zero position and 22 programmable resolutions ranging from 48 to 4096 PPR. The NEMA AMT112S motors deliver holding...
Read More »
5 Key Questions to Ask Before Choosing a Custom Welding Company
This white paper provides an in-depth overview into choosing a custom welding company by highlighting five questions you should ask a potential welding partner to determine whether they are right for your custom welding project.
Read More »
New StepSERVO Integrated Motors Feature Encoder Feedback and Advanced Control Loops
StepSERVO™ Integrated Motors consist of TSM, SSM and TXM series models. Units support operations on step and direction, streaming commands, fieldbus communications and stored Q programming. TSM series and TXM series motors come with 8 digital inputs, 4 digital outputs and 1 analog input whereas the SSM series with 3 digital inputs, 1 digital output and 1 analog input. These servomotors...
Read More »
Stepper and Servo Motors are suitable in automation applications.
Stepper and Servo Motors are designed in accordance with standards for electrical safety associated with UL and CSA certifications. Stepper motors are offered in single and double shaft versions with frame sizes ranging from 17 to 34 with torque values from 31 to 1,841 oz-in. Servo Motors come in 40 mm to 80 mm frame sizes and are equipped with 10,000 count incremental commutating encoder.
Read More »
EC 60 Brushless Servo Motors feature high pole pair count.
EC 60 Flat Frameless Brushless Servo Motors are offered in sizes ranging from size ranges from 70 W to 100 W with outer diameter of 60 mm. Units feature high accel/decel capabilities, low rotor inertia and low voltage windings. Motors are suitable for collaborative and mobile robots, AGV’s, exoskeletons and embedded robotic applications and come with hollow shaft construction.
Read More »
TSM11 StepSERVO Integrated Motors enable daisy-chain connections.
TSM11 StepSERVO Integrated Motors are enhanced with connector option that separates communication terminals as two standalone power and I/O connectors. Units are available with single 12-pin header, input, output, and RS-485 communication terminals. Connector option is offered in TSM11Q-1RM-H01, TSM11Q-2RM-H01, and TSM11Q-3RM-H01 motors. Motors can be equipped with PH Planetary Gearheads with...
Read More »
EC 45 Flat Frameless Servo Motor features hollow shaft construction.
EC 45 Flat Frameless Brushless Servo Motor is offered in 30 W to 70 W models. Featuring low voltage windings, high pole pair count and low rotor inertia, unit consists of rotor and stator with 43 mm of outer diameter. Motor is suitable for collaborative and mobile robots, AGV’s, exoskeletons and embedded robotic applications.
Read More »
Frameless Brushless Servo Motor Kits come with low voltage windings.
Frameless Brushless Servo Motor Kits consist of stator and rotor. Units are offered in size ranging from 30 Watt to 260 Watt and with outer diameter of 43 mm to 90 mm. These pancake products come with high pole pair count and offer high torque output. Kits feature hollow shaft construction which offers space for cable glands. Motor is suitable for collaborative and mobile robots, AGV’s,...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »