New Sensors / Detectors / Transducers Products

Meter indicates both pH and conductivity.

Model CCMD510 includes k=10 conductivity cell, pH combination electrode, integral electrode stand, and selection of calibration sachets. Electrode has built-in ATC designed for minimal air bubble entrapment during measurement. Meter offers programmable functions such as stability, electrode diagnosis, and auto buffer recognition.

Sensor offers security and system navigation capabilities.

Suited for mobile, handheld applications, FingerChipÃ-® sensor combines fingerprint authentication and navigation capabilities on 1.8-3.3 V I/O range. It uses sweep method of fingerprint image capture and lets user implement any security or file encryption application to command all preferred services. Authentication mechanism runs on handset or SIM card, and touchpad provides navigation...

Leak Test System aids in headlight/taillight production.

Suited for automotive applications, Falcon Leak Test System utilizes In-telense sensors to detect presence and magnitude of helium leaks. It simultaneously determines leak location and calculates total leak rate, providing real-time process control and validating integrity of each component. Immune to effects from changes in temperature, system automatically stores record of leak location and...

Refrigerant Monitors come in transportable versions.

Chillgard RT detects down to 1 ppm over range of 0-1,000 ppm, and features up to 8 detection points. Photoacoustic infrared sensing enables detection of individual refrigerant with high specificity. Available in single-point diffusion and 4-point pumped models, Chillgard LS complies with ANSI/ASHRAE 15-1994 and provides low-level monitoring. Chillgard LE comes as single-point diffusion unit,...

Accelerating Composites Production with Dielectric Cure Monitoring

This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.

Analog Sensors feature 0.5% repeatability.

Three-wire, 15-30 Vdc Model Bi20R-Q14-LU provides 0-10 V output and comes in ring style housing with 20 mm diameter hole. Suited for identification and sorting of small parts such as screws, sensor generates different output signal for each size part. Four-wire, 15-30 Vdc Model Wi70-M18-LIU5 provides 0-10 V or 4-20 mA output. Housed in standard 18 mm barrel, 75 mm probe has linear operating...

Linear Hall-Effect Sensors are field-programmable.

With modified 4-lead SIP package, one-time field-programmable A1373 and A1374 feature low-noise ratiometric outputs. Chopper stabilization technique used in Hall element provides low initial offset and minimal drift over temperature. Programmable on output pin, user can set gain, quiescent voltage output, and temperature coefficient after finished sensor assembly. Post-assembly programming...

Flow Sensor measures nitrogen consumption.

Able to work with nitrogen, argon, and other inert gases, Flow Sensor SS 20.60 also works with compressed air at up to 16 bars over pressure. It features 2 parallel outputs, 1 digital and 1 analog, which allow simultaneous connection to local display and building control system. Immersion type sensor, suited for pipes from 25-1,000 mm in dia, has expandable nitrogen measuring range from 60-160...

CIP Pharmaceutical Sensor incorporates PEEK material.

Model 225-08 toroidal conductivity sensor consists of pair of wire-wound metal toroids overmolded with U.S.P. Class VI PEEK material. Suited for use in concentrations of acids, alkalis, and rinse waters, product incorporates integral temperature sensor for temperature compensation and has conductivity range from 200 Ã-µS/cm to 2 S/cm. Sensor meets requirements of clean-in-place (CIP) liquid...

Detector finds sand in oil and gas producing systems.

Quicksand(TM) Erosion Detection System is effective when sand production cannot be eliminated. High sensitivity Quicksand(TM) probe and transmitter, based on MicrocorÃ-® Technology, provide high sensitivity, rapid response, and extended probe life. System is typically installed as on-line system, but is also available with datalogger option.

Oxygen Transmitter operates in temperatures to 1,300-

Oxymitter(TM) can provide oxygen measurements during annealing of cold rolled metal products. By receiving accurate measurements, operators are able to maintain necessary preset oxygen levels to avoid oxidation. With transmitter inserted directly into furnace, there is no sampling system to maintain. Offering accuracy of Ã-

5 and 13 Micron Resolve Columns with Greater Bed Stability

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.