Sealants

Joint Sealant is 2x as strong as former version.
Sealants

Joint Sealant is 2x as strong as former version.

GORE-TEX® creep-resistant, form-in-place gasketing material is made from GORE-TEX® expanded PTFE, which is impervious to most chemicals, suitable for use from -450 to +600°F, and able to withstand pressures to 3,000 psig. Tight-sealing product, suited for most types of sealing applications, is also suited for use in chemical processing plants.

Read More »
Miscellaneous Film

Sealing Film suits needs of bio-analytical environments.

Sterile and non-sterile 96-Well Pattern Sealing Film has no adhesive around wells to prevent tacky/sticky adhesive from adhering to plastic pipette tips or metal probes. Employing solvent-free adhesive, sealing film is available in 2 or 5 mil thick Teflon, which is compatible with aqueous solutions and organic solvents and is pierceable with single/multichannel pipettors and robotic probes....

Read More »
Epoxy Adhesive/Sealant resists temperatures to 600°F.
Sealants

Epoxy Adhesive/Sealant resists temperatures to 600°F.

Single-component, heat-curing EP17 is chemically resistant and bonds to substrates such as metals, glass, ceramics, vulcanized rubbers, and plastics. With operating range of -300 to 600°F, 100% reactive product contains no solvents or diluents and will not sag or drip on vertical surfaces. Product cures at temperatures from 300-350°F in 60-90 min and has tensile strength is 8,700 psi,...

Read More »
Sealants

Clear Backbedding Sealant permits immediate handling.

PURFECT GLAZE(TM) 34-880A one-part, polyurethane-based sealant allows handling of windows or doors immediately after glass is bedded. It offers resistance to weathering and does not creep or cold-flow during long periods. Application temperature range is 160-225°F and shelf life is 6 months at 77°F. Low viscosity application reduces equipment wear, and controlled squeeze-out improves...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Urethane Patch Kit quickly repairs concrete.

Urethane Patch Kit quickly repairs concrete.

ARMORSEAL® ExpressPatch fast-dry, low-odor, water-based system requires only one coat. It protects concrete from thermal shock, impact, corrosion, chemical attack, and abrasion while providing return to service in 4 hr. ARMORSEAL offers no outgassing at high film thickness. It may be applied directly to damp concrete using flat trowel at minimum thickness of 3/16 to 1/4 in. Kit is suitable...

Read More »
Adhesive/Sealent has temperature range of -300 to +300°F.
Epoxies

Adhesive/Sealent has temperature range of -300 to +300°F.

Master Bond Polymer System Supreme 10HTFL one component, flexible, epoxy resin based adhesive/sealant cures to flexible thermoset polymer at temperatures of 250-300°F and above and does not require refrigeration for extended storage before use. It adheres to metallic and non-metallic substrates and exhibits tensile lap shear strengths of more than 2,000 psi and T-peels in excess of 60 pli....

Read More »
Sealants

Hot-Melt Butyl Sealant is suited for edge sealing IG units.

Suited for hand gunning applications, Edge Therm(TM) THM 3000 consists of one-component, 100% solids sealant system designed for edge sealing insulating glass (IG) units. Product does not require mixing, produces minimal waste, and adheres to glass and metal substrates. Available in black and gray, product meets/exceeds requirements of ASTM E773/774 and CAN/CGSB-12.8. Product is available in 5...

Read More »
Sealants

Multi-Function Sealant helps save energy and lives.

JACO Fire and Draft Sealer(TM) is Classified by UL in accordance with ASTM-E136 for meeting non-combustible building material requirements. Product also acts as acoustical sealant, minimizing room to room and exterior noise. Zero Flame Spread/Zero Smoke Developed credited product guns from quart and 10.5 fl oz tubes. Water-based product can be tooled before curing and cleans up with water. After...

Read More »
Sealants

Sealing Media complies with food packaging regulations.

Appeel® sealing media, optimised for multi-layer film lids for rigid food packaging, seal to APET. Lids made of above material peel off from container rims in one piece and offer puncture- and radiation-resistance. OPET and OPP films permit use of metal detectors to track food contaminants. All Appeel media offer low coefficient of friction, which improves machine running properties when...

Read More »
Encapsulants

Sealant/Encapsulant cures with heat or UV light.

EMCAST 4100, 100% solids, single-component, epoxy-based adhesive can be cured by exposure to ultra violet light in 320-380 nm wavelength range and/or with heat above 110°C to cure shadowed areas. Medium-viscosity product cures to rigid material with Shore D hardness of 92, CTE of 25 ppm/°C, and 150°C Tg. It adheres to various metals and ceramic surfaces and does not need to be...

Read More »

All Topics