Sealants

Acoustical Materials

Acoustical Solutions Now Offers a Full Line of Firestopping Products to Defend Against Sound and Smoke

Firestop materials serve two primary purposes - they reduce sound transmission between rooms, and they block the spread of flame and smoke through the small spaces in a building. These products are appropriate for use in residential, commercial and industrial settings. In terms of sound reduction, firestop materials work well to seal off the tiny spaces in walls, floors and ceilings through which...

Read More »
Silicone Elastomer features electrical insulation properties.
Encapsulants

Silicone Elastomer features electrical insulation properties.

Suited for sealing and joining of metals, plastics, electrical insulations, protective coatings, and formed-in-place gaskets, Master Sil 700 silicone elastomer compound has dielectric strength of 530 V/mil and 400% elongation. Silicone adhesive/sealant features paste consistency and does not sag, slump, or run off surfaces. It cures at ambient temperatures to a flexible rubbery solid when exposed...

Read More »
Non-Combustible Sealant withstands 3,000°F for 8 hours.
Sealants

Non-Combustible Sealant withstands 3,000°F for 8 hours.

Water-based Firestop fire, smoke, and draft sealant fills penetrations and construction voids in residential and commercial applications. Thermal barrier adheres to most construction materials, including ceramics, composites, masonry, metal, plastic, and wood. Applied with sealant gun, odorless intumescent compound is non-toxic, non-corrosive, and environmentally safe. It is unaffected by...

Read More »
Logos

Handi-Foam Receives a New Look

NORTON, OHIO - October, 2006 - Fomo Products, Inc. has given Handi-Foam® Sealant product labels and Handi-Foam® Spray Foam boxes a new appearance. The new look incorporates photographs of applications on the label and the boxes as well as an updated logo for the Sealant and Spray Foam products. With the new logos, our customers will be able to better differentiate between our sealant...

Read More »
Sealants

Foam Sealant has wide operating temperature range.

Formulated for low-humidity conditions, Handi-Foam® Extreme cures at temperatures from as low as -20°C to seal, fill, bond, and stop air infiltration. Closed-cell polyurethane foam sealant also helps prevent moisture infiltration, reducing water damage and mold problems. This is particularly of use in areas where freeze/thaw cycles are common. Formula promotes low-temperature flow...

Read More »
Silicone Elastomer suits optical and display applications.
Silicone

Silicone Elastomer suits optical and display applications.

Featuring set-up time of 8-12 min at 75°F, room temperature cure MasterSil 415 one component silicone elastomer has dielectric strength of 500 V/mil and service temperature range of -185 to 400°F. Resistant to vibration, impact, and shock, it has Shore A hardness of 30, elongation of 400 at 75°F, and tensile strength of 325 psi. Compound can be applied on vertical surfaces...

Read More »
Sealant targets pharmaceutical and medical applications.
Sealants

Sealant targets pharmaceutical and medical applications.

Extrusion coated onto various substrates such as film, foil, or paper, Allegro® M helps achieve clean peel. It seals to rigid cup or tray structures including HIPS, PVC, APET, PP, and HDPE. Allegro M helps lidding structures stand up to transport challenges, minimizing chance of compromise. Typical applications include unit-of-use liquid medications, diagnostic cartridges, pre-filled...

Read More »
Epoxy Adhesive is serviceable at temperatures down to 4°K.
Epoxies

Epoxy Adhesive is serviceable at temperatures down to 4°K.

With 3-minute set-up time, EP51M produces bonds with 2,000+ psi shear strength that exhibits resistance to thermal cycling and chemicals. Bonded parts can be safely handled within 30 min. Product, suited for cryogenic applications, adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Insensitive to cleaning procedures, it can be used in electronic, electrical, computer,...

Read More »
Mortar

Wall Perimeter Sealer facilitates cove applications.

Featuring 100% solids formulation, chemical-resistant Superior Cove Kit is designed for vertical application at floor-wall joints to produce sanitary perimeter seal. This structural epoxy mortar, packaged in pre-measured kits to cover 35 lineal feet (4 in. vertical and 2 ft horizontal at 1/8 in.), requires clean surface prepared via sand blasting, water blasting, or other mechanical means. Each...

Read More »
Glass Sealant withstands temperatures to 1,450°F.
Coatings

Glass Sealant withstands temperatures to 1,450°F.

Aremco-Seal(TM) 617 is used to produce hermetic seals in porous ceramics and refractories in electrical and high-vacuum applications. Single-part, water-based glass coating, applied by dipping, brushing, or spraying, cleans up prior to curing with warm water. Curing is accomplished by setting at room temperature for 30 min and then heating to 1,600°F for 30 min. Odorless product contains no...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics