New Pumps Products

Diaphragm Pump offers stall-free air valve technology.

Capable of flows to 60 gpm, AROÃ-® EXP Model PW10A-X-X is constructed of aluminum with 1Ã-½ in. fluid inlet and 1Ã-¼ in. fluid outlet. It offers 5 diaphragm/ball-check options. Air valve design features 4 working parts and solves problem of air-motor stalling. Configuration of valve facilitates access, inspection, and scheduled service.

Centrifugal Pump meets high pressures at low speeds.

Vertical Multi-Stage Series MS5-4x4-SEL-CDM-ADP has flow rates up to 500 gal and is capable of heads up to 700 ft at 1,750 rpm. Available in stainless steel, pump features one-piece shaft, depths to 20 ft, and no seals. It offers extra stages for higher pressures. Applications include industrial washers, filtration systems, chemical plants, power plants, machine tools, spray booths, and phosphate...

Pump utilizes Diaphragm Position Control technology.

Series H/G25 Kel-CellÃ-® uses DPC technology to control diaphragm position under adverse inlet conditions. This reduces possibility of incidental diaphragm failure/rupture caused by conditions that result in excessive vacuum conditions on pump inlet. Industrial pump provides flow to 20 gpm and pressure to 1,000 psi.

Close-Coupled Pumps transfer high-solids content materials.

Offering flow rates to 1,000 gpm, MoynoÃ-® 2000 CC Pumps feature sealed, Ultra-DriveÃ-® gear-type universal joint drive train and rotor/stator pumping element geometry. ANSI flat face flanges are provided on suction and discharge ends. Single mechanical seals meet DIN Standard 24960 and ISO 3069. Pumps are suited for scum and grease pumping, lime slurry transfer and dosing, chemical...

Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up

This white paper provides an in-depth overview into choosing the right bearing for machine tools.

Centrifugal Pumps eliminate clogging problems.

Suited for sludge and slurries containing large solids, entrained air, and fibrous/stringy material, WhirlfloÃ-® vortex pumps feature fully recessed impellers that produce clear flow path to pump discharge. Spherical solids up to 10 in. can pass through pumps. Available in cast iron, high chromium iron, and stainless steel, Whirlflo units range from 2-10 in. with capacities to 7,000 gpm and...

Metering Pump offers sub-microliter dispensing.

Utilizing CeramPumpÃ-® valveless piston pumping principle, Model SMTRH provides ultra-low volume, sub-microliter dispensing. Pump is driven by precision stepper motor and will dispense from 500 nL to 5 Ã-µL. Piston stroke displacement is adjusted using flow control ring graduated in 450 divisions. Low dead volume pump head design ensures maximum bubble clearing and provides typical stroke...

Peristaltic Pump features direct-coupled design.

Available 25-100 mm sizes, SPX32 can pump harsh materials and will not vapor lock. Unaffected by abrasive nature of sludge, corrosive acids, and gaseous chemicals, unit incorporates leak zone that protects drive and self-loading design that facilitates hose changing operations. Design allows for drive removal and replacement without dismantling pump head, and 2-bearing rotor absorbs forces...

Peristaltic Pump is used in ferric sulfate treatment.

Used for metering ferric chloride into raw water, 624 U/RE wastewater treatment solution offers vacuum lift, dry priming capability with no possibility of back-flow. Design utilizes twin rollers, providing flow rates from 0.05-12.0 Lpm. Pump accommodates fluctuations in water demand and offers manual speed control, remote switching options, and digital speed display. IP55 rating ensures unit is...

Air Flow Pump suits stationary and mobile applications.

Series 6000 Linear Pump incorporates low-voltage dc motor that makes it suitable for medical, environmental, laboratory, office machine, and other stationary and mobile applications. Pump provides up to 1.5 cfm air flow as standard. Maximum pressure is rated at 4.0 psi continuous or 4.7 psi intermittent. Maximum vacuum rating is 8 in. Hg. Intake heads, constructed of high density sound-absorbing...

Air Sampling Pump features battery-powered operation.

Designed to run at 1 L/min, Grab Air Sample Pump collects air into sample bags to assess exposure from airborne chemical hazards. It operates on 9 V battery, yielding up to 1,000 L volume. Recommended for sample bags with up to 10 L capacity, process is complete when bag is properly filled. Pump suits areas where leaks, spills, or other potentially hazardous events have occurred and concentration...

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.