Gear Pump features positive displacement design.
Gear Pumps

Gear Pump features positive displacement design.

Fully-Jacketed internal gear pump comes in 11 sizes from 15 to 1,100 gpm, at pressures to 230 psi. It provides jacketing around perimeter of rotor case, inlet and discharge throats, and on many sizes, throughout flange areas. With stainless steel, steel, ductile iron, and cast iron material options, pump handles variety of fluids, withstanding temperatures to 800 deg F and viscosities to...

Read More »
Metering Pumps offer manual, electric, or pneumatic actuation.
Diaphragm Pumps

Metering Pumps offer manual, electric, or pneumatic actuation.

Modular Metering Pumps include sealless diaphragm or sealed-plunger design with wide selection of drive elements. Metering accuracy is ±0.5%, based upon setpoint resolution of .01 mm. Pumps accommodate pressures up to 17,400 psi and flow rates from 0.26 GPH to 13,225 GPH per pump head. Providing 100 set points per 1 mm of stroke length, pumps can be mixed and matched in any combination for...

Read More »
Hydraulic Pumps offer hand or foot operation.
Hand / Foot / Drum Pumps

Hydraulic Pumps offer hand or foot operation.

Models PA91 and PA95 air-over-oil pumps provide portable power for cylinders and hydraulic tools. PA95 provides up to 70 cu in. of flow in low pressure stage and 10 cu in. @ 10,000 psi. All metal construction and reduced motor noise make it suitable for indoor use. Pressure relief valve protects hydraulic circuit from damage, and 3-position treadle provides advance, hold, and retract operation.

Read More »
Tubing Pump delivers high volumes.
Peristaltic and Hose Pumps

Tubing Pump delivers high volumes.

Ismatec(R) Flowmaster FMT300 provides one-channel pumping processes with flow rates from 37 to 13 L/min. IP65 rated for dusty, humid or corrosive environments, or clean room areas. Applications include dispensing and filling in biotechnology, pharmaceutical, and food and beverage industries, or pumping harsh chemicals and abrasive fluids in chemical processing. Pump head disassembles and...

Read More »
Pump System replaces grinder pumps.
Pumps

Pump System replaces grinder pumps.

Model 20GH-RFK drop-in system replaces semi-positive displacement/progressive cavity systems. It is powered by 2 HP, 3450 RPM capacitor start, capacitor-run, single-phase, oil-filled motor. Pump offers maximum TDH of 110 ft, and maximum flow of 65 gpm. Cast-iron motor housing and volute are epoxy coated for corrosion resistance. Mechanical seal has ceramic, stationary face and carbon, rotating...

Read More »
Liquid Color Management System ends handling problems.
Miscellaneous Controls

Liquid Color Management System ends handling problems.

Pump-in-a-Drum(TM) system is based on metering mechanism whose pump is inside standard-size drum that stays sealed. During processing, system meters color through sealed tubing assembly, with automatic shutoffs preventing spillage. Changeover from empty to full drums is automatic, requiring no monitoring by operator. By returning drum to company, processor avoids problems of discarding it.

Read More »
Solenoid Pumps meter and dispense liquids.
Pumps

Solenoid Pumps meter and dispense liquids.

SV500 Series is self-priming, can start from dry condition, and can lift up to 6 ft of water. Model SV500 has output range of 100 to 1500 microliters per dispense; SV515 outputs 3 to 15 microliters; SV525 outputs 10 to 40 microliters; and SV560 outputs 50 to 350 microliters per dispense. Pumps can operate up to 1,000,000 cycles without maintenance, and handle most semi- and non-corrosive fluids.

Read More »
Grinder Pump utilizes staggered slicing action.
Pumps

Grinder Pump utilizes staggered slicing action.

ProGrind(TM) Grinder Pump offers heavy-duty construction with Quick-Connect Power Cord and adjustable legs. UL listed and CSA approved, ProGrind also features Slicerator(TM) hardened stainless steel radial cutter and shredding ring (reversible). With flow rates to 55 gpm and heads to 104 ft, ProGrind also features abrasion-resistant silicon carbide mechanical seal, built-in automatic resetting...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics