New Pumps Products

Almatec® CX Series Diaphragm Pumps Ideal for Low- to Medium-Duty General Applications

Kamp-Lintfort, Germany - Almatec-®, a premier manufacturer of air-operated diaphragm pumps specializing in plastic pumps with solid housings, has announced that its general-purpose CX Series of Pneumatic Diaphragm Pumps are ideal for low- to medium-duty applications, as well as being used as drum pumps. CX Series pumps have been designed to self-prime and are protected against dry-running. This...

High Pressure Pump offers 250 psig discharge fluid pressure.

Available in stainless steel and ductile iron bolted construction, H800 pump is designed to transfer viscous, solid-laden slurries by utilizing 3:1 pressure ratio of inlet air supply to discharge fluid. It offers max flow rate of 95 gpm, with max inlet air pressure of 85 psig, and includes ringed air valve piston with DIN or ANSI compatible flanges. Unit suits filtration, chemical sludge...

Sliding Vane Pumps optionally offer electric heating.

NP Series' 2.5 and 3 in. models support Electric Heating option, which may be used in place of jacketed heads. To accommodate this option, NP2.5 and NP3 models feature 2 additional bosses in gland area of inboard head for drilling of 2 heat pots. Heating pots are drilled and reamed to 12.5 mm and will accept any type of heating element. Additional features include special sleeve bearings,...

Dry Screw Vacuum Pumps are virtually maintenance-free.

Providing vacuum down to 1 x 10-3 mbar, GXS Series features service life up to 5 years, even in harsh applications. Pump mechanism can be cleaned using high flow purge and solvent flush accessory, eliminating need to partially strip pump. Shafts are supported at both ends, resulting in optimized dust handling, minimized vibration, and noise levels below 64 dB(A). Applications include lamination,...

Application Selection Guide: Choosing the Right Air Compressor

Choosing the right air compressor for your application is essential, but it can feel overwhelming. To learn more about how to make the right choice, read our eBook.

Sealless Triplex Pumps feature packing-free design.

Featuring double-ended shaft to accommodate various installation options, Hydra-Cell T80 Series employs asynchronous, hydraulically-balanced diaphragms with valve system that allows diaphragms to be hydraulically coupled to displacing plungers with no mechanical coupling required. Zero-leakage units can run dry without damage, will operate with closed or blocked suction line, and can pump...

Thomas Series 2665/2685 Pumps for Air Vending Applications

Series 2665/2685 WOB-L-® Piston pumps from Thomas are specially designed to stand up to the rigors of use in coin operated tire inflation pumps and other air vending applications. Series 2665 pumps are for use where fan guards are not required. Series 2685 pumps include stainless steel fan guards. Constructed of light yet rugged die-cast aluminum, Series 2665/2685 pumps incorporate epoxy coated...

Thermoplastic Sump Pump has cantilevered, bearingless shaft.

All wetted components of SUMP-GARD-® model SGK-2700 centrifugal pump are molded of solid Polypropylene, PVDF, or CPVC to eliminate chemical attack while minimizing abrasion. Alloy shaft, isolated from fluid contact, transfers torque from 125 hp motor and can employ balanced 14 in. dia impeller. This cantilevered shaft eliminates need for immersed bearings and promotes dependable operation for...

Maintenance-Free Vacuum Generators mount in tight spaces.

Providing instantaneous response, Modular E-Vac-® Vacuum Generators are compressed air-powered vacuums for lifting, pick and place, clamping, chucking, and surface mounting applications. Single-stage design with no moving parts and aluminum construction minimizes air consumption, promotes cycle speed, and eliminates fluctuations in vacuum. There are 7 units rated up to 21 in. Hg suited for...

Diaphragm Dosing Pumps are chemical resistant.

Integrating 2-phase stepper motors, type FEM 1.02 and FEM 1.09 pumps achieve flow rates from 0.2-20 mLpm and 0.9-90 mLpm, respectively. Compact pumps measure 62 x 75 x 63 mm, cover wide dosing range (1:100), and can serve for more than 10,000 hr. Leak-tight units are self-priming to 8.5 in. Hg and demonstrate 1% repeatability. Depending on pump version, head materials include polypropylene or...

Free Pump Selection Software From Vertiflo Pump Company

With one click, you can access convenient pump selection software, tools and pump specifications and data. Selections are based on you input like GPM and TDH and fluid properties. The pump performance curve is generated with impeller diameter, efficiency and motor BHP. Operating speeds may be changed for optimum selections: 60 or 50 HZ. http://www.vertiflopump.com/bob.htm Vertiflo Pump Company...

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.