New Power Supplies Products

Inverting DC/DC Converter has onboard Schottky diode.

Housed in low-profile SOT-23 package, LT3462/A operates in dual inductor inverting topology that filters input and output side currents. Product performs fixed frequency switching at 1.2 and 2.7 MHz for LT3462 and LT3462A versions, respectively. Able to deliver up to 100 mA @ -5 V from 5 V input, both devices operate from input voltage of 2.5-16 V and deliver output voltages to -38 V. Rated 40 V,...

Step-Down DC/DC Converter produces 800 mA current.

Housed in MSOP and 3 x 3 mm DFN packages, LTC3407-2 synchronous buck regulator delivers up to 800 mA continuous output current from 2 separate channels. It uses constant frequency and current mode architecture and operates from 2.5-5.5 V input voltage. Delivering efficiencies up to 95%, converter can generate 2 independent output voltages as low as 0.6 V, while 2.25 MHz switching frequency keeps...

DC/AC Inverter Modules provide compact flexibility.

Rectifier and DC-supplied inverter modules extend all features and benefits of ABB industrial drive ACS800 across 1-2,250 hp range, from 380-600 Vac. Modular configuration utilizes common DC bus line-up, which enables users to wire input power via one 3-phase AC connection, with each DC-fed inverter unit sharing bus and providing output power to motor. Multidrives offer common braking feature,...

Power Conversion IC utilizes soft drive circuitry.

Optimized for worldwide input SMPS applications, Series MR2900 integrates high-speed 900 V IGBT power switch, pulse frequency modulation controller, onboard start-up circuit, and protection functions. Seven amp Model 2920 features 150 W output capacity, while 10 A Model MD2940 offers 225 W rating. Using multiple chip module structure approach, series is housed in 7-pin isolated ZIP package....

Compressed Air Systems and Components

Download this e-book for more information on compressed air systems and components.

Enclosed Switching Power Supplies are medically approved.

Approved to EN60601-1 safety specifications, MMK150-Series provides output power of 150 W to low and moderate power medical systems and instrumentation. All models accept universal input from 85-265 Vac, and 4 models provide single outputs from 5-24 Vdc. With SMT construction, series offers power densities to 4 W/in.Ã-³ and features integral power-good LED indicator and output adjustment...

UPS System provides regulated power for critical ac loads.

Single-phase UPS consists of on-line, double-conversion system that incorporates input and output isolation transformers; dual-source, fully controlled and rated static switch; and internal or remote manual bypass switch. Providing continuous power, unit utilizes digitally controlled PWM inverter design with serial communications and control capability. It also features man-machine interface...

Power Supply features 3-phase input.

DIN rail mount, 20 A Model SDN20-24-480 offers adjustable output from 24-28 Vdc and input range of 408-576 V. Fuses are integrated on primary side to protect power supply, while secondary side is protected by integrated fuse mode. In event of continuous overload for longer than 5 sec, fuse mode will activate to switch off power supply. User can turn output on again without disconnecting input AC....

DC/DC Converters feature 300 A/-µs transient response.

Typhoon(TM) SMT15F Point-Of-Load Converters, capable of delivering up to 15 A output current, include 4 models with nominal output voltages of 1.0, 1.2, 1.5, and 1.8 V. Intended for use on boards employing intermediate bus architectures, units offer input voltage of 10.8-13.2 V. Surface-mount, non-isolated modules use synchronous buck regulator topology and switching frequency of 1 MHz to...

Step Down Converter offers over 90% efficiency.

Model MD5001 contains control IC and main switch MOSFET on single chip, SOP-8 package. Input voltage range is 4.5-14 V and output voltage is 0.8-12 V with maximum output current of 1 A. Unit includes remote on/off, overcurrent protection, and built-in thermal protection. It is recommended for designers who have employed regulators but find thermal issues to be a problem and have insufficient...

DC/DC Converters feature single in-line package.

SuperLynx(TM) II, Austin Lynx(TM) II, and MicroLynx(TM) II are 16, 10, and 6 A converters, respectively, available in 2.4-5.5 Vdc and 8.4-14 Vdc input voltage ranges. Non-isolated, Point-Of-Load modules feature programmable output voltages and offer EZ-SEQUENCE power sequencing, which supports ratio-metric, voltage tracking, and cascading. All are open-frame units that operate from -40 to 185Ã-

Does Your Parking Lot Make a Good First Impression?

To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.