New Power Supplies Products

Current Sources are programmable via front panel controls.

AC and DC Current Source, Model 6221 supports I-V measurements and can be programmed for pulse widths as short as 5 Ã-µs. Both DC Current Source, Model 6220 and Model 6221 can source DC currents from 100 fA to 100 mA and feature current noise as low as 80 fA rms. Supporting linear, logarithmic, and custom sweeps, units offer tools for defining current ramps and stepping through predefined...

Compact DC/DC Converter suits medical applications.

With 3 kV isolation, VAD series converters measure 1.25 x 0.8 x 0.4 in. and feature 24 pin dip pinout. They operate with efficiencies up to 82% and are available in single- and dual-output versions with 2:1 or 4:1 input ranges. Rated 3-7.5 W in 3.3-15 V single output models and Ã-

DC/DC Converters suit DPA architecture applications.

Available in 5, 10, and 15 A version, Series VSNS point-of-load converters offer efficiencies up to 94%, while operating within temperature range of -40 to 85Ã-

DC/DC Converter suits space-constrained applications.

Model LT1935 is a 2 A, 40 V step-up converter in ThinSOT(TM) package. Input voltage of 2.3-16 V enables unit to operate from single-cell, Li-Ion batteries up to fixed 15 V input rails, delivering outputs up to 38 V. NPN switch achieves VCESAT of 180 mV at 2 A, independent of supply voltage. Constant 1.2 MHz switching frequency allows designers to keep switching noise out of noise-sensitive...

Why Use A Locking Cord?

Learn about the benefits of using locking cords in applications that rely on extensive technological infrastructures.

Uninterruptible Power System protects equipment and saves files.

Model HP T500 enables continued work during sudden brief power outages. During extended outages, it can automatically save data, close applications, and perform systematic shutdown. Rated at 500 VA/300 W, unit provides up to 30 min of battery backup and includes serial and USB interface for power monitoring. Line-interactive voltage regulation corrects brownouts as low as 83 V back to 120 V...

Orbital Welding Power Supply suits cleanroom applications.

Rated at 160 A, ORBIMAT 160CR features anodized aluminum panels, which eliminate risk of shedding from painted panels, keeping contamination to minimum. It includes automatic welding parameter generation facility and is capable of holding 2,000 four-level welding procedures. Each procedure incorporates Application Specification section that allows for storage of details of gas types and flow...

Power Converter suits photovoltaic applications.

Ecostar(TM) 30 kW grid-tie utility, interactive converter offers 97% peak efficiency, transformer efficiency of 97.5%, and standby tare losses of 25 W. Unit automatically disconnects power transformer from grid when there is no power from PV array, eliminating night-time transformer losses. Detailed text messages give system warnings and faults, while diagnostics and logic ensure that nuisance...

DC-AC Inverter powers dual-lamp, backlit LCDs.

DMAD Series DC-AC inverter powers LCDs backlit by 2 CCFLs (cold cathode fluorescent lamps, or tubes) that are used where high brightness and wide dimming flexibility are required. On-board dimming signal mates to most controllers to facilitate integration. Measuring 4.76 x .86 x .50 in., product features up to 12 W of output power and integrated I/O connectors. It also includes external control...

DC/DC Converter offers wide input range of 2.5-28 V.

PowerBlox(TM) SP7652 is a 600 kHz, 6 A step-down regulator capable of handling up to 28 V input and delivering output voltages as low as 0.8 V. With resistance of 15 mOhm, unit provides 92% efficiency at full load. It includes programmable soft start, over-temperature protection, dual under-voltage lock-out thresholds, and short circuit protection. Rated for -40 to +85Ã-

Power Supply suits distributed architecture applications.

Featuring active power correction, 48 V Model NTS358 can deliver full rated output of 350 W with 30 cfm forced air or 200 W with convection cooling. Measuring 4 x 7 in., 85-264 Vac unit typically operates at 85% efficiency. Built-in Or-ing diode eliminates need for external circuitry when using unit in redundant configuration. Device includes 12 V, 1 A auxiliary output and 5 V at 2 A standby...

Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics

Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.