Power Controllers

Interface Controller simplifies powered device design.
Power Controllers

Interface Controller simplifies powered device design.

Model LTC4257 Power over Ethernet Interface Controller incorporates circuitry necessary to connect powered device to IEEE 802.3af powered Ethernet network. Offered in SO-8 package, -48V powered unit incorporates 25 k signature resistance, programmable classification, power switching, inrush current limiting, and fault protection. Integrated 100 V power MOSFET keeps PD circuitry disconnected from...

Read More »
Power Controllers

Power Controllers provide power supply tracking and sequencing.

Models MIC2584 and MIC2585 are dual-channel, hot swap power controllers available in 16-pin and 24-pin TSSOP packages, respectively. They operate from system supply voltages from 1.0-13.2 V with input surge protection up to 20 V. Model MIC2584's default output voltage mode is tracking, whereas Model MIC2585 can be configured for output voltage tracking or staggered-mode operation. Both devices...

Read More »
Power Controllers

Power Controller controls input power to SBCs.

Smaller than one credit card, PowerNut provides regulated 5 Vdc using its onboard 7-30 Vdc regulator or furnishes power directly from source to downstream devices at up to 1 A. By sending commands to PowerNut, main controller can monitor input voltage and turn off power to itself or another device for specified periods of time. Using ultra-low quiescent current regulator and low-power PIC...

Read More »
Full-Bridge Controller simplifies DC/DC converters.
Power Controllers

Full-Bridge Controller simplifies DC/DC converters.

Offered in current and voltage modes, LTC3722 zero voltage switching, phase shifted controller is suited for isolated offline and distributed power supplies from 200 W up to several kw. It offers fixed frequency operation with current mode and adaptive zero voltage delay control. Controller also provides closed-loop control method, adaptive/manual delay control, adjustable synchronous...

Read More »
Power Controller provides remote management capabilities.
Power Controllers

Power Controller provides remote management capabilities.

Model IPC3402-2756 Intelligent Power Controller(TM) offers 24 A of power in 1.75 in. tall package and provides power control via Ethernet and Direct Serial communication ports to remotely reboot locked equipment or remotely control system power. Power up/down sequencing provides user configurable sequencing. Unit may be connected to other IPC34XX series power controllers for control of up to 80...

Read More »
Power Controllers

Power Controller amplifies and protects PLC outputs.

Model E-1048-700 Solid-State Remote Power Controller protects PLCs from overloads and short circuits while providing power amplification of PLC output signals. Available for 24 Vdc power sources, unit is offered in current ratings of 0.5, 1, 2, and 4 A. Inrush currents up to 40 A are automatically delayed for approximately 100 milliseconds, avoiding nuisance tripping. Unit is suitable for DC...

Read More »
Power Controllers

PWM Controller meets IEA 1-W initiative.

Model FAN7601 programmable frequency, current mode PWM controller reduces standby power losses to below 1 W. With operating frequency up to 300 kHz and operating current of 4 mA max, unit is suitable for off-line switch-mode power supply and DC/DC conversion applications. Controller includes programmable 20 mS soft start and start-up switch, overvoltage protection, thermal shutdown, and under...

Read More »
PWM Controller suits SMPS and DC/DC converter applications.
Power Controllers

PWM Controller suits SMPS and DC/DC converter applications.

Fixed frequency, voltage mode FAN7556 offers power saving mode current of 200 Â-µA and stand-by current of 100 Â-µA. Unit includes current sensing comparator, trimmed oscillator, temperature compensated reference, and high current totem pole output. Auto-restart circuit provides over-voltage protection, over-current protection, and over-load protection. Available in DIP-8 and SOP-8...

Read More »
Controller takes LabVIEW into harsh environments.
Power Controllers

Controller takes LabVIEW into harsh environments.

Compact FieldPoint consists of 20 I/O modules and 3 intelligent controllers that perform analog and discrete control, user-defined data logging, and inline math and signal processing. Solid metal backplane with 4 or 8 slots withstands 50 g of shock and 5 g of RMS vibration. Ethernet connectivity allows remote monitoring of sites, while built-in Web and file servers provide access to embedded...

Read More »
Power controllers reduce panel space.
Power Controllers

Power controllers reduce panel space.

DIN-A-MITEÂ-® compact power controllers provide SCR control, heatsink, wiring, and touch-safe exterior. Controllers offer switching capabilities from 16-100 A and voltages from 24-600 V in 4 packages. Units feature DIN rail or sub-panel mounting, MDR replacement screen to eliminate mercury problems, and tighter-fitting cover on integrated ground-leg wire packages to ease wiring. All 4 models...

Read More »

All Topics