New Plain Bearings (Bushings) Products

Bearings have chemical-resistant plastic surface.

Fluid-film thrust and journal bearings incorporate engineered plastic surface for use in process-lubricated applications. Bearing pad material is environmentally friendly and can operate directly in water, process fluid, or oil. It provides chemical and wear resistance and tolerates dry start conditions. Mechanical properties such as strength, resistance to creep, and thermal/electric...

Plain Bearings (Bushings)

Plain Bearings withstand high loads under slow speeds.

High-Strength GAR-MAX filament-wound dry bearings are resistant to shock loads and chemicals. They withstand max static specific loads to 43,500 psi and dynamic loads to 20,000 psi. Max recommended speed is 25 fpm, and max pU factor is 40,000 psi x fps. With -148 to +320Ã-

Plain Bearings (Bushings)

Shaft-Locking Bushings come in inch and metric sizes.

Suited for systems requiring frequent washdowns, stainless steel ETP Express Shaft Locking Bushings require no maintenance, handle temperatures from -22 to +180Ã-

Plain Bearings (Bushings)

Solid-Polymer Bearings are optimized for dry operation.

Injection-molded EP72(TM) series plain bearings and thrust washers provide wear-resistance, low friction, and creep-resistance over temperatures up to 500Ã-

Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components

A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.

Plain Bearings (Bushings)

Plastic Bearings are suited for wash down applications.

Lubrication- and corrosion-free, rod-end, pillow block, and sperical igubalÃ-® bearings offer vibration-resistance, ability to operate in liquids or chemicals, and resistance to dirt and dust. Plastic clips, suited for installation in sheet metal applications, utilize design that eliminates misalignment issues. Double spherical bearings have one end rotated 90Ã-

Plain Bearings (Bushings)

Linear Bearings utilize dry-running technology.

DryLinÃ-® R linear bearings are composed of self-lubricating polymer iglideÃ-® J. With channels that enable flow of dirt and dust, bearings do not need to be sealed. Flat glide pads reduce clearance between liner and shaft, and axial fastener secures bearing tighter to outside housing for added stability. Contact area is increased to 80%, improving overall load capacity. DryLin R bearings...

Plain Bearings (Bushings)

Bearings are offered in four styles.

DP series lead-free, PTFE-based, metal-polymer plain bearings include DP20 bearings, which are suited for dry applications; chemical-resistant DP30 bearings, which are suited for automotive/industrial applications; and DP31 bearings, which provide resistance to cavitation erosion, wear, and attack by aggressive lubricants. DB(TM) bearings are constructed of cast bronze with graphite-free solid...

Plain Bearings (Bushings)

Bearing Material is self-lubricating and abrasion-resistant.

Vesconite comes as solid, cored, or flat form and offers low coefficient of friction, high dynamic loading, and ease of machining. It is suitable for applications in marine, earthmoving, pumping, and mechanical handling industries, or any application where lubrication is difficult or not possible to be performed satisfactorily. Fully machined or molded parts are available.

Plain Bearings (Bushings)

Prelubricated Bearings handle oscillating movements.

Series DS(TM) bearings eliminate fretting corrosion damage to shafts under low-amplitude oscillating movements. Bearings feature rigid steel backing to which is bonded porous bronze sinter layer, impregnated with filled acetal polymer bearing lining. Bearings withstand max static specific load of 16,000 psi. Max recommended sliding speed is 5 fps dry, 8 fps greased, and 33 fps with marginal...

Plain Bearings (Bushings)

Polymer Bearings provide snap-in installation.

Type 7 Nylon(TM) bearings provide double-flange construction that assures positive bearing retention for installation in thin plates. Available in metric and inch sizes, units offer .001 in. min diameter shaft-to-bearing clearance and compensation gap that allows bearings to be collapsed. Requiring no lubrication, corrosion-resistant products come in 7 sleeve, flanged, and snap-in types. Bearings...

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.